From: Heiko Stuebner <heiko.stuebner@xxxxxxxxxxxxxxxxxxxxx>
The lion gmac node currently uses opposite active-values for the
gmac phy reset pin. The gpio-declaration uses active-high while the
separate snps,reset-active-low property marks the pin as active low.
While on the kernel side this works ok, other DT users may get
confused - as seen with uboot right now.
So bring this in line and make both properties match, similar to the
other Rockchip board.
Fixes: d99a02bcfa81 ("arm64: dts: rockchip: add RK3368-uQ7 (Lion) SoM")
Signed-off-by: Heiko Stuebner <heiko.stuebner@xxxxxxxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
index a53de05b5c80..0a137df1ed40 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
@@ -157,7 +157,7 @@ &gmac {
pinctrl-0 = <&rgmii_pins>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 50000>;
- snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
+ snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
tx_delay = <0x10>;
rx_delay = <0x10>;
status = "okay";
--
2.26.2
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
