Hi Kever, Caesar,
could you double check where the type-c power-domains are located
in the power-tree, as Caesar did add them under pd_vio back in 2016.
Thanks
Heiko
Am Dienstag, 28. April 2020, 22:30:03 CEST schrieb Johan Jonker:
> The pd_tcpc0 and pd_tcpc1 nodes are currently a sub node of pd_vio.
> In the rk3399 TRM figure of the 'Power Domain Partition' and in the
> table of 'Power Domain and Voltage Domain Summary' these power domains
> are positioned directly under VD_LOGIC, so fix that in 'rk3399.dtsi'.
>
> Signed-off-by: Johan Jonker <jbx6244@xxxxxxxxx>
> ---
> arch/arm64/boot/dts/rockchip/rk3399.dtsi | 20 ++++++++++----------
> 1 file changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> index 37279db53..a4dc1bf2e 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> @@ -1056,6 +1056,16 @@
> clocks = <&cru HCLK_SDIO>;
> pm_qos = <&qos_sdioaudio>;
> };
> + pd_tcpc0@RK3399_PD_TCPD0 {
> + reg = <RK3399_PD_TCPD0>;
> + clocks = <&cru SCLK_UPHY0_TCPDCORE>,
> + <&cru SCLK_UPHY0_TCPDPHY_REF>;
> + };
> + pd_tcpc1@RK3399_PD_TCPD1 {
> + reg = <RK3399_PD_TCPD1>;
> + clocks = <&cru SCLK_UPHY1_TCPDCORE>,
> + <&cru SCLK_UPHY1_TCPDPHY_REF>;
> + };
> pd_usb3@RK3399_PD_USB3 {
> reg = <RK3399_PD_USB3>;
> clocks = <&cru ACLK_USB3>;
> @@ -1088,16 +1098,6 @@
> pm_qos = <&qos_isp1_m0>,
> <&qos_isp1_m1>;
> };
> - pd_tcpc0@RK3399_PD_TCPD0 {
> - reg = <RK3399_PD_TCPD0>;
> - clocks = <&cru SCLK_UPHY0_TCPDCORE>,
> - <&cru SCLK_UPHY0_TCPDPHY_REF>;
> - };
> - pd_tcpc1@RK3399_PD_TCPD1 {
> - reg = <RK3399_PD_TCPD1>;
> - clocks = <&cru SCLK_UPHY1_TCPDCORE>,
> - <&cru SCLK_UPHY1_TCPDPHY_REF>;
> - };
> pd_vo@RK3399_PD_VO {
> reg = <RK3399_PD_VO>;
> #address-cells = <1>;
>
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
