On Thu, Feb 13, 2020 at 02:08:09PM +0800, Shawn Lin wrote: > From: Simon Xue <xxm@xxxxxxxxxxxxxx> > > Signed-off-by: Simon Xue <xxm@xxxxxxxxxxxxxx> > Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx> > > --- > > Changes in v2: > - fix yaml format > > .../devicetree/bindings/pci/rockchip-dw-pcie.yaml | 148 +++++++++++++++++++++ > 1 file changed, 148 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml > > diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml > new file mode 100644 > index 0000000..527c770 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml > @@ -0,0 +1,148 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pci/rockchip-dw-pcie.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: DesignWare based PCIe RC controller on Rockchip SoCs > + > +maintainers: > + - Shawn Lin <shawn.lin@xxxxxxxxxxxxxx> > + - Simon Xue <xxm@xxxxxxxxxxxxxx> > + > +# We need a select here so we don't match all nodes with 'snps,dw-pcie' > +select: > + properties: > + compatible: > + contains: > + const: rockchip,rk1808-pcie > + required: > + - compatible > + Need to reference pci-bus.yaml. > +properties: > + compatible: > + enum: > + - rockchip,rk1808-pcie > + - snps,dw-pcie Doesn't match the example. This says 1 string that either of the 2 strings. > + > + reg: > + maxItems: 1 Example shows 2. If so, need to define here what each one is. > + > + clocks: > + items: > + - description: High speed clock for PCIe > + - description: Low speed clock for PCIe > + - description: AHB clock for PCIe > + - description: APB clock for PCIe > + - description: Auxiliary clock for PCIe > + > + clock-names: > + items: > + - const: hsclk > + - const: lsclk > + - const: aclk > + - const: pclk > + - const: sclk-aux > + > + resets: > + items: > + - description: PCIe niu high reset line > + - description: PCIe niu low reset line > + - description: PCIe grf reset line > + - description: PCIe control reset line > + - description: PCIe control powerup reset line > + - description: PCIe control master reset line > + - description: PCIe control slave reset line > + - description: PCIe control dbi reset line > + - description: PCIe control button reset line > + - description: PCIe control power engine reset line > + - description: PCIe control core reset line > + - description: PCIe control non-sticky reset line > + - description: PCIe control sticky reset line > + - description: PCIe control power reset line > + - description: PCIe niu ahb reset line > + - description: PCIe niu apb reset line > + > + reset-names: > + items: > + - const: niu-h > + - const: niu-l > + - const: grf-p > + - const: ctl-p > + - const: ctl-powerup > + - const: ctl-mst-a > + - const: ctl-slv-a > + - const: ctl-dbi-a > + - const: ctl-button > + - const: ctl-pe > + - const: ctl-core > + - const: ctl-nsticky > + - const: ctl-sticky > + - const: ctl-pwr > + - const: ctl-niu-a > + - const: ctl-niu-p > + > + rockchip,usbpciegrf: > + enum: > + - rockchip,usbpciegrf > + description: The grf for COMBPHY configuration and state registers. COMBOPHY? Why isn't this part of the phy node? > + > +required: > + - compatible > + - "#address-cells" > + - "#size-cells" > + - reg > + - clocks > + - clock-names > + - msi-map > + - num-lanes > + - phys > + - phy-names > + - ranges > + - resets > + - reset-names > + - rockchip,usbpciegrf > + - reset-gpios > + > +additionalProperties: false With pci-bus.yaml included, this will have to be 'unevaluatedProperties: false'. > + > +examples: > + - | > + pcie0: pcie@fc400000 { Unit address should be first entry in 'reg'. > + compatible = "rockchip,rk1808-pcie", "snps,dw-pcie"; > + #address-cells = <3>; > + #size-cells = <2>; > + bus-range = <0x0 0x1f>; > + reg = <0x0 0xfc000000 0x0 0x400000>, > + <0x0 0xfc400000 0x0 0x10000>; > + clocks = <&cru HSCLK_PCIE>, <&cru LSCLK_PCIE>, > + <&cru ACLK_PCIE>, <&cru PCLK_PCIE>, > + <&cru SCLK_PCIE_AUX>; > + clock-names = "hsclk", "lsclk", > + "aclk", "pclk", > + "sclk-aux"; > + msi-map = <0x0 &its 0x0 0x1000>; > + num-lanes = <2>; > + phys = <&combphy PHY_TYPE_PCIE>; Not documented. > + phy-names = "pcie-phy"; Not documented. Not really needed if only 1. > + ranges = <0x00000800 0x0 0xf8000000 0x0 0xf8000000 0x0 0x800000 > + 0x83000000 0x0 0xf8800000 0x0 0xf8800000 0x0 0x3700000 > + 0x81000000 0x0 0xfbf00000 0x0 0xfbf00000 0x0 0x100000>; > + resets = <&cru SRST_PCIE_NIU_H>, <&cru SRST_PCIE_NIU_L>, > + <&cru SRST_PCIEGRF_P>, <&cru SRST_PCIECTL_P>, > + <&cru SRST_PCIECTL_POWERUP>, <&cru SRST_PCIECTL_MST_A>, > + <&cru SRST_PCIECTL_SLV_A>, <&cru SRST_PCIECTL_DBI_A>, > + <&cru SRST_PCIECTL_BUTTON>, <&cru SRST_PCIECTL_PE>, > + <&cru SRST_PCIECTL_CORE>, <&cru SRST_PCIECTL_NSTICKY>, > + <&cru SRST_PCIECTL_STICKY>, <&cru SRST_PCIECTL_PWR>, > + <&cru SRST_PCIE_NIU_A>, <&cru SRST_PCIE_NIU_P>; > + reset-names = "niu-h", "niu-l", "grf-p", "ctl-p", > + "ctl-powerup", "ctl-mst-a", "ctl-slv-a", > + "ctl-dbi-a", "ctl-button", "ctl-pe", > + "ctl-core", "ctl-nsticky", "ctl-sticky", > + "ctl-pwr", "ctl-niu-a", "ctl-niu-p"; > + rockchip,usbpciegrf = <&usb_pcie_grf>; > + reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; > + }; > + > +... > -- > 1.9.1 > > > _______________________________________________ Linux-rockchip mailing list Linux-rockchip@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-rockchip
