On 2020/4/28 下午6:00, Jagan Teki wrote:
Move U-Boot specific properties into rk3399-puma u-boot
specific dtsi file.
This would help to sync the devicetrees from Linux whenever
required instead of adding specific nodes.
Cc: Peter Robinson <pbrobinson@xxxxxxxxx>
Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
Reviewed-by: Kever Yang <kever.yang@xxxxxxxxxxxxxx>
Thanks,
- Kever
---
Changes for v2:
- none
arch/arm/dts/rk3399-puma-u-boot.dtsi | 16 ++++++++++++++++
arch/arm/dts/rk3399-puma.dtsi | 11 -----------
2 files changed, 16 insertions(+), 11 deletions(-)
diff --git a/arch/arm/dts/rk3399-puma-u-boot.dtsi b/arch/arm/dts/rk3399-puma-u-boot.dtsi
index 52f62b5d39..e664779227 100644
--- a/arch/arm/dts/rk3399-puma-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-puma-u-boot.dtsi
@@ -22,3 +22,19 @@
};
};
+
+&bios_enable {
+ u-boot,dm-pre-reloc;
+};
+
+&gpio1 {
+ u-boot,dm-pre-reloc;
+};
+
+&gpio3 {
+ u-boot,dm-pre-reloc;
+};
+
+&spiflash {
+ u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi
index 558b6337df..246a892cb7 100644
--- a/arch/arm/dts/rk3399-puma.dtsi
+++ b/arch/arm/dts/rk3399-puma.dtsi
@@ -91,7 +91,6 @@
*/
bios_enable: bios_enable {
compatible = "regulator-fixed";
- u-boot,dm-pre-reloc;
regulator-name = "bios_enable";
enable-active-high;
gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
@@ -520,14 +519,6 @@
status = "okay";
};
-&gpio1 {
- u-boot,dm-pre-reloc;
-};
-
-&gpio3 {
- u-boot,dm-pre-reloc;
-};
-
&pinctrl {
/* Pins that are not explicitely used by any devices */
pinctrl-names = "default";
@@ -633,8 +624,6 @@
#size-cells = <0>;
spiflash: w25q32dw@0 {
- u-boot,dm-pre-reloc;
-
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <49500000>;
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
