From: Chen-Yu Tsai <wens@xxxxxxxx>
Hi,
Here is the remaining patch for roc-rk3399-pc, along with a few other
new patches.
- Based on discussions from v1, patch one, newly added, drops the list
of valid values for linux,default-triggers.
- Patch two is the same as in v1
- Patch three, new, sets dr_mode to "host" to the dwc2 OTG controller,
matching what the board uses it for, a host port. This gets rid of
a warning from the kernel.
Please have a look.
Regards
ChenYu
Chen-Yu Tsai (3):
dt-bindings: leds: common: Drop enumeration for linux,default-triggers
arm64: dts: rockchip: rk3399-roc-pc: Fix MMC numbering for LED
triggers
arm64: dts: rockchip: rk3328-roc-cc: Set dr_mode to "host" for OTG
.../devicetree/bindings/leds/common.yaml | 21 +------------------
.../arm64/boot/dts/rockchip/rk3328-roc-cc.dts | 1 +
.../dts/rockchip/rk3399-roc-pc-mezzanine.dts | 8 +++++++
.../boot/dts/rockchip/rk3399-roc-pc.dtsi | 4 ++--
4 files changed, 12 insertions(+), 22 deletions(-)
--
2.26.0
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
