There are 2 'assigned-clocks' properties in the '&gmac2phy'
node in 'rk3328-evb.dts', so remove one of them.
Info from clk-rk3328.c:
MUXGRF(SCLK_MAC2PHY, "clk_mac2phy", mux_mac2phy_src_p,
CLK_SET_RATE_NO_REPARENT,
RK3328_GRF_MAC_CON2, 10, 1, MFLAGS),
Signed-off-by: Johan Jonker <jbx6244@xxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3328-evb.dts | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
index 49c4b96da..ab69b493d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
@@ -82,7 +82,6 @@
&gmac2phy {
phy-supply = <&vcc_phy>;
clock_in_out = "output";
- assigned-clocks = <&cru SCLK_MAC2PHY_SRC>;
assigned-clock-rate = <50000000>;
assigned-clocks = <&cru SCLK_MAC2PHY>;
assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
--
2.11.0
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
