Due to v5.7-rc1 sync the SD controller nodes in rk3399.dtsi have HCLK_SD assigned-clocks which are usually required for Linux and don't require to handle them in U-Boot. assigned-clocks = <&cru HCLK_SD>; So, mark them as empty in clock otherwise device probe on those SD controllers would fail. Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> --- drivers/clk/rockchip/clk_rk3399.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/rockchip/clk_rk3399.c b/drivers/clk/rockchip/clk_rk3399.c index 1f62376595..d822acace1 100644 --- a/drivers/clk/rockchip/clk_rk3399.c +++ b/drivers/clk/rockchip/clk_rk3399.c @@ -996,6 +996,7 @@ static ulong rk3399_clk_set_rate(struct clk *clk, ulong rate) break; case ACLK_VOP1: case HCLK_VOP1: + case HCLK_SD: /** * assigned-clocks handling won't require for vopl, so * return 0 to satisfy clk_set_defaults during device probe. -- 2.17.1 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-rockchip
