Re: [PATCH] usb: fusb302: Convert to use GPIO descriptors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am Donnerstag, 23. April 2020, 14:02:42 CEST schrieb Robin Murphy:
> On 2020-04-15 8:24 pm, Linus Walleij wrote:
> > This converts the FUSB302 driver to use GPIO descriptors.
> > The conversion to descriptors per se is pretty straight-forward.
> > 
> > In the process I discovered that:
> > 
> > 1. The driver uses a completely undocumented device tree binding
> >     for the interrupt GPIO line, "fcs,int_n". Ooops.
> > 
> > 2. The undocumented binding, presumably since it has not seen
> >     review, is just "fcs,int_n", lacking the compulsory "-gpios"
> >     suffix and also something that is not a good name because
> >     the "_n" implies the line is inverted which is something we
> >     handle with flags in the device tree. Ooops.
> > 
> > 3. Possibly the driver should not be requesting the line as a
> >     GPIO and request the corresponding interrupt line by open
> >     coding, the GPIO chip is very likely doubleing as an IRQ
> >     controller and can probably provide an interrupt directly
> >     for this line with interrupts-extended = <&gpio0 ...>;
> > 
> > 4. Possibly the IRQ should just be tagged on the I2C client node
> >     in the device tree like apparently ACPI does, as it overrides
> >     this IRQ with client->irq if that exists.
> > 
> > But now it is too late to do much about that and as I can see
> > this is used like this in the Pinebook which is a shipping product
> > so let'a just contain the mess and move on.
> > 
> > The property currently appears in:
> > arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
> > 
> > Create a quirk in the GPIO OF library to allow this property
> > specifically to be specified without the "-gpios" suffix, we have
> > other such bindings already.
> 
> FWIW, the datasheet makes it clear than INT_N is just a regular IRQ 
> output, so it really should be specified as an interrupt targeting the 
> GPIO controller just like any other I2C chip, and the FUSB302 binding 
> itself supports.
> 
> The Pinebook Pro devicetree has only just landed this cycle, so there 
> should still be plenty of time to fix it and not have to worry about an 
> ugly undocumented quirk. The downstream vendor kernels use a totally 
> different FUSB302 driver from the upstream one (based on extcon rather 
> than the typec framework) so I don't think downstream DTBs are a concern.

I guess it's just about removing the "fcs,int_n" property, right?
Does someone want to send a patch removing that?

I'm hopeful the whole extcon mess will go away ... cros-ec-power-delivery
now seems to have moved to the typec framework, so at some point
the rk3399 typec-phy-driver could be converted as well, enabling us to
also have real type-c on non-chromebook rk3399 boards.


Heiko

> > Cc: Tobias Schramm <t.schramm@xxxxxxxxxxx>
> > Cc: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> > Cc: Yueyao Zhu <yueyao@xxxxxxxxxx>
> > Cc: Guenter Roeck <linux@xxxxxxxxxxxx>
> > Cc: devicetree@xxxxxxxxxxxxxxx
> > Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
> > ---
> > This is now covered as far as GPIO is concerned but you might
> > want to look into creating proper bindings for this or
> > correcting the devicetree.
> > ---
> >   drivers/gpio/gpiolib-of.c        | 21 +++++++++++++++++++++
> >   drivers/usb/typec/tcpm/fusb302.c | 32 +++++++++-----------------------
> >   2 files changed, 30 insertions(+), 23 deletions(-)
> > 
> > diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
> > index ccc449df3792..20c2c428168e 100644
> > --- a/drivers/gpio/gpiolib-of.c
> > +++ b/drivers/gpio/gpiolib-of.c
> > @@ -460,6 +460,24 @@ static struct gpio_desc *of_find_arizona_gpio(struct device *dev,
> >   	return of_get_named_gpiod_flags(dev->of_node, con_id, 0, of_flags);
> >   }
> >   
> > +static struct gpio_desc *of_find_usb_gpio(struct device *dev,
> > +					  const char *con_id,
> > +					  enum of_gpio_flags *of_flags)
> > +{
> > +	/*
> > +	 * Currently this USB quirk is only for the Fairchild FUSB302 host which is using
> > +	 * an undocumented DT GPIO line named "fcs,int_n" without the compulsory "-gpios"
> > +	 * suffix.
> > +	 */
> > +	if (!IS_ENABLED(CONFIG_TYPEC_FUSB302))
> > +		return ERR_PTR(-ENOENT);
> > +
> > +	if (!con_id || strcmp(con_id, "fcs,int_n"))
> > +		return ERR_PTR(-ENOENT);
> > +
> > +	return of_get_named_gpiod_flags(dev->of_node, con_id, 0, of_flags);
> > +}
> > +
> >   struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id,
> >   			       unsigned int idx, unsigned long *flags)
> >   {
> > @@ -504,6 +522,9 @@ struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id,
> >   	if (PTR_ERR(desc) == -ENOENT)
> >   		desc = of_find_arizona_gpio(dev, con_id, &of_flags);
> >   
> > +	if (PTR_ERR(desc) == -ENOENT)
> > +		desc = of_find_usb_gpio(dev, con_id, &of_flags);
> > +
> >   	if (IS_ERR(desc))
> >   		return desc;
> >   
> > diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c
> > index b498960ff72b..b28facece43c 100644
> > --- a/drivers/usb/typec/tcpm/fusb302.c
> > +++ b/drivers/usb/typec/tcpm/fusb302.c
> > @@ -9,14 +9,13 @@
> >   #include <linux/delay.h>
> >   #include <linux/errno.h>
> >   #include <linux/extcon.h>
> > -#include <linux/gpio.h>
> > +#include <linux/gpio/consumer.h>
> >   #include <linux/i2c.h>
> >   #include <linux/interrupt.h>
> >   #include <linux/kernel.h>
> >   #include <linux/module.h>
> >   #include <linux/mutex.h>
> >   #include <linux/of_device.h>
> > -#include <linux/of_gpio.h>
> >   #include <linux/pinctrl/consumer.h>
> >   #include <linux/proc_fs.h>
> >   #include <linux/regulator/consumer.h>
> > @@ -83,7 +82,7 @@ struct fusb302_chip {
> >   	struct work_struct irq_work;
> >   	bool irq_suspended;
> >   	bool irq_while_suspended;
> > -	int gpio_int_n;
> > +	struct gpio_desc *gpio_int_n;
> >   	int gpio_int_n_irq;
> >   	struct extcon_dev *extcon;
> >   
> > @@ -1618,30 +1617,17 @@ static void fusb302_irq_work(struct work_struct *work)
> >   
> >   static int init_gpio(struct fusb302_chip *chip)
> >   {
> > -	struct device_node *node;
> > +	struct device *dev = chip->dev;
> >   	int ret = 0;
> >   
> > -	node = chip->dev->of_node;
> > -	chip->gpio_int_n = of_get_named_gpio(node, "fcs,int_n", 0);
> > -	if (!gpio_is_valid(chip->gpio_int_n)) {
> > -		ret = chip->gpio_int_n;
> > -		dev_err(chip->dev, "cannot get named GPIO Int_N, ret=%d", ret);
> > -		return ret;
> > -	}
> > -	ret = devm_gpio_request(chip->dev, chip->gpio_int_n, "fcs,int_n");
> > -	if (ret < 0) {
> > -		dev_err(chip->dev, "cannot request GPIO Int_N, ret=%d", ret);
> > -		return ret;
> > -	}
> > -	ret = gpio_direction_input(chip->gpio_int_n);
> > -	if (ret < 0) {
> > -		dev_err(chip->dev,
> > -			"cannot set GPIO Int_N to input, ret=%d", ret);
> > -		return ret;
> > +	chip->gpio_int_n = devm_gpiod_get(dev, "fcs,int_n", GPIOD_IN);
> > +	if (IS_ERR(chip->gpio_int_n)) {
> > +		dev_err(dev, "failed to request gpio_int_n\n");
> > +		return PTR_ERR(chip->gpio_int_n);
> >   	}
> > -	ret = gpio_to_irq(chip->gpio_int_n);
> > +	ret = gpiod_to_irq(chip->gpio_int_n);
> >   	if (ret < 0) {
> > -		dev_err(chip->dev,
> > +		dev_err(dev,
> >   			"cannot request IRQ for GPIO Int_N, ret=%d", ret);
> >   		return ret;
> >   	}
> > 
> 





_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux