Setting the output CSC mode is required for a YUV output, but must not be set when the input is also YUV. Doing this (as tested with a YUV420P to YUV420P conversion) results in wrong colors. Adapt the logic to only set the CSC mode when the output is YUV and the input is RGB. Fixes: f7e7b48e6d79 ("[media] rockchip/rga: v4l2 m2m support") Signed-off-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx> --- drivers/media/platform/rockchip/rga/rga-hw.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/media/platform/rockchip/rga/rga-hw.c b/drivers/media/platform/rockchip/rga/rga-hw.c index 4be6dcf292ff..cbffcf986ccf 100644 --- a/drivers/media/platform/rockchip/rga/rga-hw.c +++ b/drivers/media/platform/rockchip/rga/rga-hw.c @@ -216,13 +216,17 @@ static void rga_cmd_set_trans_info(struct rga_ctx *ctx) } if (ctx->out.fmt->hw_format >= RGA_COLOR_FMT_YUV422SP) { - switch (ctx->out.colorspace) { - case V4L2_COLORSPACE_REC709: - dst_info.data.csc_mode = RGA_SRC_CSC_MODE_BT709_R0; - break; - default: - dst_info.data.csc_mode = RGA_DST_CSC_MODE_BT601_R0; - break; + if (ctx->in.fmt->hw_format < RGA_COLOR_FMT_YUV422SP) { + switch (ctx->out.colorspace) { + case V4L2_COLORSPACE_REC709: + dst_info.data.csc_mode = + RGA_SRC_CSC_MODE_BT709_R0; + break; + default: + dst_info.data.csc_mode = + RGA_DST_CSC_MODE_BT601_R0; + break; + } } } -- 2.26.0 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-rockchip