Hi ChenYu, Am Dienstag, 21. April 2020, 05:48:52 CEST schrieb Chen-Yu Tsai: > On Fri, Apr 17, 2020 at 2:19 AM Johan Jonker <jbx6244@xxxxxxxxx> wrote: > > > > 'bus-width' and pinctrl containing the bus-pins > > should be in the same file, so add them to > > all mmc nodes in 'rk3328.dtsi'. > > Nope. First of all, pinctrl usage is with pinctrl-N properties, not the > pinctrl device, and there are no defaults set for any of the mmc nodes. > Second, these are board design specific. For example, boards are free to > use just 4 bits for the eMMC if they so desire. So this should be in each > board dts file. If a board is missing this property, fix the board. you are correct that the pinctrl entries are missing from the patches, bus-width and pinctrl should be defined in the same file each time, but for the whole idea I tend to disagree. So far every board with a Rockchip socs follows Rockchip's reference design for a lot of parts - for example I only see sdmmc nodes with bus-width=4 etc. So the basic idea is to have default pinctrl settings for the settings everybody uses predefined ... if a board comes along that needs different settings it is free to redefine that. Heiko > > This applies to all three patches in the series. > > ChenYu > > > Signed-off-by: Johan Jonker <jbx6244@xxxxxxxxx> > > --- > > arch/arm64/boot/dts/rockchip/rk3328.dtsi | 3 +++ > > 1 file changed, 3 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi > > index 175060695..db2c3085e 100644 > > --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi > > +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi > > @@ -861,6 +861,7 @@ > > clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, > > <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; > > clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; > > + bus-width = <4>; > > fifo-depth = <0x100>; > > max-frequency = <150000000>; > > status = "disabled"; > > @@ -873,6 +874,7 @@ > > clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, > > <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; > > clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; > > + bus-width = <4>; > > fifo-depth = <0x100>; > > max-frequency = <150000000>; > > status = "disabled"; > > @@ -885,6 +887,7 @@ > > clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, > > <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; > > clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; > > + bus-width = <8>; > > fifo-depth = <0x100>; > > max-frequency = <150000000>; > > status = "disabled"; > > -- > > 2.11.0 > > > > > > _______________________________________________ > > linux-arm-kernel mailing list > > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > _______________________________________________ Linux-rockchip mailing list Linux-rockchip@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-rockchip
