On Mon, 13 Apr 2020 18:55:12 +0200
Heiko Stübner <heiko@xxxxxxxxx> wrote:
> Hi Jonathan,
>
Hi Heiko,
> > > +/* buffer elements are u16, timestamp needs to be 8-byte aligned */
> > > +#define SARADC_BUFFER_NUM_U16 ALIGN(SARADC_MAX_CHANNELS, 4)
> > I may be going crazy but I think that will get you the 'start' of the
> > timestamp, not the length including it.
> >
> > We should be seeing 24 bytes here = 12 u16s. Sanity check the value.
> >
> > Running through the stack of defines.
> > #define ALIGN(x, a) __ALIGN_KERNEL((x), (a))
> > #define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1)
> > #define __ALIGN_KERNEL_MASK(x, mask) (((x) + (mask)) & ~(mask))
> >
> > ALIGN(6, 4) == __ALIGN_KERNEL(6, 4)
> > == __ALIGN_KERNEL_MASK(6, 3)
> > == (((6 + 3) & ~3)
> > which is 9 with the bottom two bits masked or b1001 & b1100 = 8 not 12
> >
> > So I think you are looking for
> > ALIGN(SARADC_MAX_CHANNELS + sizeof(u64) / sizeof(u16), 4)
> > which will be ((10 + 3) & ~3) b1101 & b1100 = 12
>
> hmm, getting the start of the timestamp was actually what I intended ;-)
> The dln2-adc driver did that fancy struct definition for its data. which
> I stole, see the part from blow:
Crossed emails. I realised I was being an idiot but had already clicked send :)
>
> > > + struct {
> > > + u16 values[SARADC_BUFFER_NUM_U16];
> > > + int64_t timestamp;
> > > + } data;
>
> So SARADC_BUFFER_NUM really is meant to only contain the
> number of actual buffer data - I guess I should explain that out better
> in the comment. Because defining this separate makes this so much
> more readable when we're not trying to implicitly add the timestamp
> space.
>
> And a size_of(data) for that struct then returned nicely these 24 bytes
> in my tests.
>
>
> > >
> > > struct rockchip_saradc_data {
> > > - int num_bits;
> > > const struct iio_chan_spec *channels;
> > > int num_channels;
> > > unsigned long clk_rate;
> > > @@ -49,8 +56,37 @@ struct rockchip_saradc {
> > > struct reset_control *reset;
> > > const struct rockchip_saradc_data *data;
> > > u16 last_val;
> > > + const struct iio_chan_spec *last_chan;
> > > };
> > >
> > > +static void rockchip_saradc_power_down(struct rockchip_saradc *info)
> > > +{
> > > + /* Clear irq & power down adc */
> > > + writel_relaxed(0, info->regs + SARADC_CTRL);
> > > +}
> > > +
> > > +static int rockchip_saradc_conversion(struct rockchip_saradc *info,
> > > + struct iio_chan_spec const *chan)
> > > +{
> > > + reinit_completion(&info->completion);
> > > +
> > > + /* 8 clock periods as delay between power up and start cmd */
> > > + writel_relaxed(8, info->regs + SARADC_DLY_PU_SOC);
> > > +
> > > + info->last_chan = chan;
> > > +
> > > + /* Select the channel to be used and trigger conversion */
> > > + writel(SARADC_CTRL_POWER_CTRL
> > > + | (chan->channel & SARADC_CTRL_CHN_MASK)
> > > + | SARADC_CTRL_IRQ_ENABLE,
> > > + info->regs + SARADC_CTRL);
> > > +
> > > + if (!wait_for_completion_timeout(&info->completion, SARADC_TIMEOUT))
> > > + return -ETIMEDOUT;
> > > +
> > > + return 0;
> > > +}
> > > +
> > > static int rockchip_saradc_read_raw(struct iio_dev *indio_dev,
> > > struct iio_chan_spec const *chan,
> > > int *val, int *val2, long mask)
> > > @@ -62,24 +98,12 @@ static int rockchip_saradc_read_raw(struct iio_dev *indio_dev,
> > > case IIO_CHAN_INFO_RAW:
> > > mutex_lock(&indio_dev->mlock);
> > >
> > > - reinit_completion(&info->completion);
> > > -
> > > - /* 8 clock periods as delay between power up and start cmd */
> > > - writel_relaxed(8, info->regs + SARADC_DLY_PU_SOC);
> > > -
> > > - /* Select the channel to be used and trigger conversion */
> > > - writel(SARADC_CTRL_POWER_CTRL
> > > - | (chan->channel & SARADC_CTRL_CHN_MASK)
> > > - | SARADC_CTRL_IRQ_ENABLE,
> > > - info->regs + SARADC_CTRL);
> > > -
> > > - if (!wait_for_completion_timeout(&info->completion,
> > > - SARADC_TIMEOUT)) {
> > > - writel_relaxed(0, info->regs + SARADC_CTRL);
> > > + ret = rockchip_saradc_conversion(info, chan);
> > > + if (ret) {
> > > + rockchip_saradc_power_down(info);
> > > mutex_unlock(&indio_dev->mlock);
> > > - return -ETIMEDOUT;
> > > + return ret;
> > > }
> > > -
> > > *val = info->last_val;
> > > mutex_unlock(&indio_dev->mlock);
> > > return IIO_VAL_INT;
> > > @@ -91,7 +115,7 @@ static int rockchip_saradc_read_raw(struct iio_dev *indio_dev,
> > > }
> > >
> > > *val = ret / 1000;
> > > - *val2 = info->data->num_bits;
> > > + *val2 = chan->scan_type.realbits;
> > > return IIO_VAL_FRACTIONAL_LOG2;
> > > default:
> > > return -EINVAL;
> > > @@ -104,10 +128,9 @@ static irqreturn_t rockchip_saradc_isr(int irq, void *dev_id)
> > >
> > > /* Read value */
> > > info->last_val = readl_relaxed(info->regs + SARADC_DATA);
> > > - info->last_val &= GENMASK(info->data->num_bits - 1, 0);
> > > + info->last_val &= GENMASK(info->last_chan->scan_type.realbits - 1, 0);
> > >
> > > - /* Clear irq & power down adc */
> > > - writel_relaxed(0, info->regs + SARADC_CTRL);
> > > + rockchip_saradc_power_down(info);
> > >
> > > complete(&info->completion);
> > >
> > > @@ -118,51 +141,55 @@ static const struct iio_info rockchip_saradc_iio_info = {
> > > .read_raw = rockchip_saradc_read_raw,
> > > };
> > >
> > > -#define ADC_CHANNEL(_index, _id) { \
> > > +#define ADC_CHANNEL(_index, _id, _res) { \
> > > .type = IIO_VOLTAGE, \
> > > .indexed = 1, \
> > > .channel = _index, \
> > > .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> > > .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
> > > .datasheet_name = _id, \
> > > + .scan_index = _index, \
> > > + .scan_type = { \
> > > + .sign = 'u', \
> > > + .realbits = _res, \
> > > + .storagebits = 16, \
> > > + .endianness = IIO_LE, \
> > > + }, \
> > > }
> > >
> > > static const struct iio_chan_spec rockchip_saradc_iio_channels[] = {
> > > - ADC_CHANNEL(0, "adc0"),
> > > - ADC_CHANNEL(1, "adc1"),
> > > - ADC_CHANNEL(2, "adc2"),
> > > + ADC_CHANNEL(0, "adc0", 10),
> > > + ADC_CHANNEL(1, "adc1", 10),
> > > + ADC_CHANNEL(2, "adc2", 10),
> > > };
> > >
> > > static const struct rockchip_saradc_data saradc_data = {
> > > - .num_bits = 10,
> > > .channels = rockchip_saradc_iio_channels,
> > > .num_channels = ARRAY_SIZE(rockchip_saradc_iio_channels),
> > > .clk_rate = 1000000,
> > > };
> > >
> > > static const struct iio_chan_spec rockchip_rk3066_tsadc_iio_channels[] = {
> > > - ADC_CHANNEL(0, "adc0"),
> > > - ADC_CHANNEL(1, "adc1"),
> > > + ADC_CHANNEL(0, "adc0", 12),
> > > + ADC_CHANNEL(1, "adc1", 12),
> > > };
> > >
> > > static const struct rockchip_saradc_data rk3066_tsadc_data = {
> > > - .num_bits = 12,
> > > .channels = rockchip_rk3066_tsadc_iio_channels,
> > > .num_channels = ARRAY_SIZE(rockchip_rk3066_tsadc_iio_channels),
> > > .clk_rate = 50000,
> > > };
> > >
> > > static const struct iio_chan_spec rockchip_rk3399_saradc_iio_channels[] = {
> > > - ADC_CHANNEL(0, "adc0"),
> > > - ADC_CHANNEL(1, "adc1"),
> > > - ADC_CHANNEL(2, "adc2"),
> > > - ADC_CHANNEL(3, "adc3"),
> > > - ADC_CHANNEL(4, "adc4"),
> > > - ADC_CHANNEL(5, "adc5"),
> > > + ADC_CHANNEL(0, "adc0", 10),
> > > + ADC_CHANNEL(1, "adc1", 10),
> > > + ADC_CHANNEL(2, "adc2", 10),
> > > + ADC_CHANNEL(3, "adc3", 10),
> > > + ADC_CHANNEL(4, "adc4", 10),
> > > + ADC_CHANNEL(5, "adc5", 10),
> > > };
> > >
> > > static const struct rockchip_saradc_data rk3399_saradc_data = {
> > > - .num_bits = 10,
> > > .channels = rockchip_rk3399_saradc_iio_channels,
> > > .num_channels = ARRAY_SIZE(rockchip_rk3399_saradc_iio_channels),
> > > .clk_rate = 1000000,
> > > @@ -193,6 +220,42 @@ static void rockchip_saradc_reset_controller(struct reset_control *reset)
> > > reset_control_deassert(reset);
> > > }
> > >
> > > +static irqreturn_t rockchip_saradc_trigger_handler(int irq, void *p)
> > > +{
> > > + struct iio_poll_func *pf = p;
> > > + struct iio_dev *i_dev = pf->indio_dev;
> > > + struct rockchip_saradc *info = iio_priv(i_dev);
> > > + struct {
> > > + u16 values[SARADC_BUFFER_NUM_U16];
> > > + int64_t timestamp;
> > > + } data;
> > > + int ret;
> > > + int i, j = 0;
> > > +
> > > + mutex_lock(&i_dev->mlock);
> > > +
> > > + for_each_set_bit(i, i_dev->active_scan_mask, i_dev->masklength) {
> > > + const struct iio_chan_spec *chan = &i_dev->channels[i];
> > > +
> > > + ret = rockchip_saradc_conversion(info, chan);
> > > + if (ret) {
> > > + rockchip_saradc_power_down(info);
> > > + goto out;
> > > + }
> > > +
> > > + data.values[j] = info->last_val;
> > > + j++;
> > > + }
> > > +
> > > + iio_push_to_buffers_with_timestamp(i_dev, &data, iio_get_time_ns(i_dev));
> > > +out:
> > > + mutex_unlock(&i_dev->mlock);
> > > +
> > > + iio_trigger_notify_done(i_dev->trig);
> > > +
> > > + return IRQ_HANDLED;
> > > +}
> > > +
> > > static int rockchip_saradc_probe(struct platform_device *pdev)
> > > {
> > > struct rockchip_saradc *info = NULL;
> > > @@ -221,6 +284,11 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
> > >
> > > info->data = match->data;
> > >
> > > + if (info->data->num_channels > SARADC_MAX_CHANNELS) {
> > > + dev_err(&pdev->dev, "max channels exceeded");
> > > + return -EINVAL;
> >
> > How can that happen? Bug in the addition of a new device type?
> > If it's just paranoia against future code, perhaps add a comment to
> > say that.
>
> yep that is "paranoia" for the case someone adds a fancy new 20 channel
> saradc variant and forgets to adapt the constant.
>
> I'll add a comment.
>
> >
> > > + }
> > > +
> > > mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > > info->regs = devm_ioremap_resource(&pdev->dev, mem);
> > > if (IS_ERR(info->regs))
> > > @@ -315,6 +383,12 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
> > > indio_dev->channels = info->data->channels;
> > > indio_dev->num_channels = info->data->num_channels;
> > >
> > > + ret = devm_iio_triggered_buffer_setup(&indio_dev->dev, indio_dev, NULL,
> > > + rockchip_saradc_trigger_handler,
> > > + NULL);
> > > + if (ret)
> > > + goto err_clk;
> > > +
> >
> > Please avoid mixing an matching between device managed an unmanaged interfaces.
> > It means the driver is not 'obviously correct' and hence harder to review.
> >
> > Two choices here. Either use devm_add_action_or_reset to automatically
> > disable each clock + regulator in the managed release path, drop all the error
> > handling and remove (note this should be a precursor patch), or use
> > iio_triggered_buffer_setup and manually call iio_triggered_buffer_cleanup
> > in the right place in the remove function.
>
> I'll go with the devm_* approach, less complexity is better than adding more ;-)
>
>
> Heiko
>
> > > ret = iio_device_register(indio_dev);
> > > if (ret)
> > > goto err_clk;
> >
> >
>
>
>
>
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
