On Fri, Mar 27, 2020 at 5:58 PM Johan Jonker <jbx6244@xxxxxxxxx> wrote:
>
> Hi Chen-Yu Tsai,
>
> The led node names need some changes.
> 'linux,default-trigger' value does not fit.
>
> From leds-gpio.yaml:
>
> patternProperties:
> # The first form is preferred, but fall back to just 'led' anywhere in the
> # node name to at least catch some child nodes.
> "(^led-[0-9a-f]$|led)":
> type: object
>
> Rename led nodenames to 'led-0' form
>
> Also include all mail lists found with:
> ./scripts/get_maintainer.pl --nogit-fallback --nogit
>
> devicetree@xxxxxxxxxxxxxxx
Oops...
> If you like change the rest of dts with leds as well...
>
> DTC arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dt.yaml
> CHECK arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dt.yaml
> arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dt.yaml: leds:
> yellow-led:linux,default-trigger:0: 'mmc0' is not one of ['backlight',
> 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
> arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dt.yaml: leds:
> diy-led:linux,default-trigger:0: 'mmc1' is not one of ['backlight',
> 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
> DTC arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml
> CHECK arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml
> arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml: leds:
> diy-led:linux,default-trigger:0: 'mmc2' is not one of ['backlight',
> 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
> arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml: leds:
> yellow-led:linux,default-trigger:0: 'mmc1' is not one of ['backlight',
> 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
Maybe we should just get rid of linux,default-trigger then?
Heiko?
ChenYu
> make -k ARCH=arm64 dtbs_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/leds/leds-gpio.yaml
>
> > From: Chen-Yu Tsai <wens@xxxxxxxx>
> >
> > With SDIO now enabled, the numbering of the existing MMC host controllers
> > gets incremented by 1, as the SDIO host is the first one.
> >
> > Increment the numbering of the MMC LED triggers to match.
> >
> > Fixes: cf3c5397835f ("arm64: dts: rockchip: Enable sdio0 and uart0 on rk3399-roc-pc-mezzanine")
> > Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
> > ---
> > arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts | 8 ++++++++
> > arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi | 4 ++--
> > 2 files changed, 10 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
> > index 2acb3d500fb9..f0686fc276be 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
> > +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
> > @@ -38,6 +38,10 @@ vcc3v3_pcie: vcc3v3-pcie {
> > };
> > };
> >
> > +&diy_led {
> > + linux,default-trigger = "mmc2";
> > +};
> > +
> > &pcie_phy {
> > status = "okay";
> > };
> > @@ -91,3 +95,7 @@ &uart0 {
> > pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
> > status = "okay";
> > };
> > +
> > +&yellow_led {
> > + linux,default-trigger = "mmc1";
> > +};
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
> > index 9f225e9c3d54..bc060ac7972d 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
> > +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
> > @@ -70,14 +70,14 @@ work-led {
> > linux,default-trigger = "heartbeat";
> > };
> >
> > - diy-led {
> > + diy_led: diy-led {
> > label = "red:diy";
> > gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
> > default-state = "off";
> > linux,default-trigger = "mmc1";
> > };
> >
> > - yellow-led {
> > + yellow_led: yellow-led {
> > label = "yellow:yellow-led";
> > gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
> > default-state = "off";
> > --
> > 2.25.1
>
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
