Re: [PATCH] ARM: dts: rockchip: use DMA channels for UARTs of TinkerBoard

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Heiko,

This belongs in rk3288.dtsi, as this is definitly not board-specific, as
the dma-uart connection is done inside the soc.

At least on arm64 (rk3328, px30, probably more) we already have the
uart dmas in the core dtsi without any problems.

Is there any reason why you only did add it to the tinker board only?

There is no special reason. Simply I don't have and not tested on other
boards of RK3288. But I hope these DMA settings can work correctly on
other boards.

I'll resend patch for rk3288.dtsi.

Best Regards,
Katsuhiro Suzuki


On 2020/03/15 0:09, Heiko Stübner wrote:
Hi,

Am Samstag, 14. März 2020, 15:23:27 CET schrieb Katsuhiro Suzuki:
This patch enables to use DMAC for all UARTs that are connected to
dmac_peri core for TinkerBoard.

Only uart2 is connected different DMAC (dmac_bus_s) so keep current
settings on this patch.

This belongs in rk3288.dtsi, as this is definitly not board-specific, as
the dma-uart connection is done inside the soc.

At least on arm64 (rk3328, px30, probably more) we already have the
uart dmas in the core dtsi without any problems.

Is there any reason why you only did add it to the tinker board only?


Heiko


Signed-off-by: Katsuhiro Suzuki <katsuhiro@xxxxxxxxxxxxx>
---
  arch/arm/boot/dts/rk3288-tinker.dtsi | 8 ++++++++
  1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
index 312582c1bd37..6efabeaf3c6d 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
@@ -491,10 +491,14 @@ &tsadc {
  };
&uart0 {
+	dmas = <&dmac_peri 1>, <&dmac_peri 2>;
+	dma-names = "tx", "rx";
  	status = "okay";
  };
&uart1 {
+	dmas = <&dmac_peri 3>, <&dmac_peri 4>;
+	dma-names = "tx", "rx";
  	status = "okay";
  };
@@ -503,10 +507,14 @@ &uart2 {
  };
&uart3 {
+	dmas = <&dmac_peri 7>, <&dmac_peri 8>;
+	dma-names = "tx", "rx";
  	status = "okay";
  };
&uart4 {
+	dmas = <&dmac_peri 9>, <&dmac_peri 10>;
+	dma-names = "tx", "rx";
  	status = "okay";
  };







_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip




[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux