An experimental test with the command below gives these errors: arch/arm/boot/dts/rv1108-elgin-r1.dt.yaml: adc@1038c000: 'clock-frequency' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/rv1108-evb.dt.yaml: adc@1038c000: 'clock-frequency' does not match any of the regexes: 'pinctrl-[0-9]+' 'clock-frequency' is not a valid property for a saradc node, so remove it. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/iio/adc/ rockchip-saradc.yaml Signed-off-by: Johan Jonker <jbx6244@xxxxxxxxx> --- arch/arm/boot/dts/rv1108.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index 153868c62..f9cfe2c80 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -366,7 +366,6 @@ reg = <0x1038c000 0x100>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #io-channel-cells = <1>; - clock-frequency = <1000000>; clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; clock-names = "saradc", "apb_pclk"; status = "disabled"; -- 2.11.0 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-rockchip
