Hello Minas,
On Fri, Feb 28, 2020 at 6:01 AM Minas Harutyunyan
<Minas.Harutyunyan@xxxxxxxxxxxx> wrote:
> On 2/21/2020 6:07 PM, Otavio Salvador wrote:
> > On Fri, Feb 21, 2020 at 11:06 AM Otavio Salvador
> > <otavio@xxxxxxxxxxxxxxxx> wrote:
> >> On Fri, Feb 21, 2020 at 3:52 AM Minas Harutyunyan
> >> <Minas.Harutyunyan@xxxxxxxxxxxx> wrote:
> >>> On 2/20/2020 5:16 PM, Otavio Salvador wrote:
> >>>> Hello Minas,
> >>>>
> >>>> Thanks for all your help on this, ...
> >>>>
> >>>> On Thu, Feb 20, 2020 at 3:59 AM Minas Harutyunyan
> >>>> <Minas.Harutyunyan@xxxxxxxxxxxx> wrote:
> >>>>>
> >>>>> On 2/19/2020 7:10 PM, Otavio Salvador wrote:
> >>>> ...
> >>>>>> What sequence do you want us to do?
> >>>>>
> >>> Please provide dwc2 debug log when stop working with g_serial exception
> >>> dump inside.
> >>> Also provide dwc2 log when it's work without issue.
> >>
> >> Attached.
> >
> Reviewed all logs. Not found any dwc2 related issue. Not able to
> reproduce on my setup. My log on rmmod g_serial:
>
> [68784.817773] g_serial gadget: reset config
> [68784.817775] g_serial gadget: acm ttyGS0 deactivated
> [68784.817779] dwc2 dwc2.1.auto: dwc2_hsotg_ep_disable(ep 000000005e9ae420)
> [68784.817784] dwc2 dwc2.1.auto: dwc2_hsotg_ep_disable: DxEPCTL=0x08080200
> [68784.817791] dwc2 dwc2.1.auto: dwc2_hsotg_ep_disable(ep 00000000e6730f2b)
> [68784.817796] dwc2 dwc2.1.auto: dwc2_hsotg_ep_disable: DxEPCTL=0x08880200
> [68784.817805] dwc2 dwc2.1.auto: dwc2_hsotg_ep_disable(ep 00000000cef05e9b)
> [68784.817809] dwc2 dwc2.1.auto: dwc2_hsotg_ep_disable: DxEPCTL=0x084c000a
> [68784.817820] g_serial gadget: acm ttyGS0 deactivated
> [68784.817894] usb 5-4: USB disconnect, device number 6
> [68784.817975] dwc2 dwc2.1.auto: dwc2_hsotg_ep_disable(ep 00000000e6730f2b)
> [68784.817980] dwc2 dwc2.1.auto: dwc2_hsotg_ep_disable: DxEPCTL=0x088a0200
>
> Pay attention g_serial twice performing ttySG0 deactivation.
> In my setup second deactivation passed Ok, but in your case exception
> back trace print out with NULL pointer de-reference on spin_lock_irq.
> Could you please add debug print before spin_lock_irq() in function
> gs_close() in file u_serial.c to check tty, tty->driver_data. Are these
> vars NULL or no.
> Just rmmod g_serial case fully enough.
[ 207.715898] dwc2 30180000.usb: dwc2_hsotg_pullup: is_on: 0 op_state: 3
[ 207.715942] dwc2 30180000.usb: complete: ep b45e8dac ep0, req
9e5949b0, -108 => 863fc1b9
[ 207.715966] dwc2 30180000.usb: dwc2_hsotg_complete_setup: failed -108
[ 207.715996] dwc2 30180000.usb: complete: ep edfa46d3 ep2out, req
c659a301, -108 => f0de5013
[ 207.716050] dwc2 30180000.usb: complete: ep edfa46d3 ep2out, req
f46b68c4, -108 => f0de5013
[ 207.716078] dwc2 30180000.usb: complete: ep edfa46d3 ep2out, req
24890a46, -108 => f0de5013
[ 207.716100] dwc2 30180000.usb: complete: ep edfa46d3 ep2out, req
fc4810fd, -108 => f0de5013
[ 207.716119] dwc2 30180000.usb: complete: ep edfa46d3 ep2out, req
f641bdad, -108 => f0de5013
[ 207.716139] dwc2 30180000.usb: complete: ep edfa46d3 ep2out, req
92871573, -108 => f0de5013
[ 207.716158] dwc2 30180000.usb: complete: ep edfa46d3 ep2out, req
fe77b603, -108 => f0de5013
[ 207.716177] dwc2 30180000.usb: complete: ep edfa46d3 ep2out, req
3e9064d5, -108 => f0de5013
[ 207.716196] dwc2 30180000.usb: complete: ep edfa46d3 ep2out, req
5aae2e11, -108 => f0de5013
[ 207.716216] dwc2 30180000.usb: complete: ep edfa46d3 ep2out, req
7c5834db, -108 => f0de5013
[ 207.716236] dwc2 30180000.usb: complete: ep edfa46d3 ep2out, req
968af244, -108 => f0de5013
[ 207.716257] dwc2 30180000.usb: complete: ep edfa46d3 ep2out, req
fa68c2eb, -108 => f0de5013
[ 207.716276] dwc2 30180000.usb: complete: ep edfa46d3 ep2out, req
6cfbcee5, -108 => f0de5013
[ 207.716296] dwc2 30180000.usb: complete: ep edfa46d3 ep2out, req
eea82a2b, -108 => f0de5013
[ 207.716315] dwc2 30180000.usb: complete: ep edfa46d3 ep2out, req
56ccd82d, -108 => f0de5013
[ 207.716335] dwc2 30180000.usb: complete: ep edfa46d3 ep2out, req
a00b7148, -108 => f0de5013
[ 207.716389] dwc2 30180000.usb: dwc2_hsotg_ep_disable(ep edfa46d3)
[ 207.716410] dwc2 30180000.usb: dwc2_hsotg_ep_stop_xfr: stopping
transfer on ep2out
[ 207.716438] dwc2 30180000.usb: dwc2_hsotg_ep_disable: DxEPCTL=0x08080200
[ 207.716457] dwc2 30180000.usb: dwc2_hsotg_ep_disable(ep 03f40054)
[ 207.716469] dwc2 30180000.usb: dwc2_hsotg_ep_disable: DxEPCTL=0x088a0200
[ 207.716567] dwc2 30180000.usb: dwc2_hsotg_ep_disable(ep 108f89fa)
[ 207.716581] dwc2 30180000.usb: dwc2_hsotg_ep_disable: DxEPCTL=0x098c000a
[ 207.722600] gs_close: before spin_unlock_irq 1: tty->driver_data is baf4a00d
[ 207.722625] gs_close: ttyGS0 (11bbbfea,dc9a1db1) ...
[ 207.722646] gs_close: ttyGS0 (11bbbfea,dc9a1db1) done!
[ 208.040122] dwc2 30180000.usb: dwc2_hsotg_ep_disable(ep 03f40054)
[ 208.040153] dwc2 30180000.usb: dwc2_hsotg_ep_disable: DxEPCTL=0x088a0200
[ 208.040177] dwc2 30180000.usb: dwc2_hsotg_ep_disable(ep edfa46d3)
[ 208.040194] dwc2 30180000.usb: dwc2_hsotg_ep_disable: DxEPCTL=0x080a0200
[ 208.040214] dwc2 30180000.usb: dwc2_hsotg_ep_disable(ep 108f89fa)
[ 208.040227] dwc2 30180000.usb: dwc2_hsotg_ep_disable: DxEPCTL=0x098e000a
[ 208.040243] dwc2 30180000.usb: dwc2_hsotg_ep_disable(ep 12d21028)
[ 208.040255] dwc2 30180000.usb: dwc2_hsotg_ep_disable: DxEPCTL=0x08020400
[ 208.040271] dwc2 30180000.usb: dwc2_hsotg_ep_disable(ep fb6b3e60)
[ 208.040282] dwc2 30180000.usb: dwc2_hsotg_ep_disable: DxEPCTL=0x08020400
[ 208.040298] dwc2 30180000.usb: dwc2_hsotg_ep_disable(ep abea3d06)
[ 208.040310] dwc2 30180000.usb: dwc2_hsotg_ep_disable: DxEPCTL=0x08020400
[ 208.040326] dwc2 30180000.usb: dwc2_hsotg_ep_disable(ep 8074ac21)
[ 208.040338] dwc2 30180000.usb: dwc2_hsotg_ep_disable: DxEPCTL=0x08020400
[ 208.040355] dwc2 30180000.usb: dwc2_hsotg_ep_disable(ep 9449e3ee)
[ 208.040367] dwc2 30180000.usb: dwc2_hsotg_ep_disable: DxEPCTL=0x08020400
[ 208.040383] dwc2 30180000.usb: dwc2_hsotg_ep_disable(ep 3b6cd68c)
[ 208.040395] dwc2 30180000.usb: dwc2_hsotg_ep_disable: DxEPCTL=0x08020400
[ 208.040412] dwc2 30180000.usb: dwc2_hsotg_ep_disable(ep 38c4d9db)
[ 208.040426] dwc2 30180000.usb: dwc2_hsotg_ep_disable: DxEPCTL=0x08020400
[ 208.040443] dwc2 30180000.usb: dwc2_hsotg_ep_disable(ep 67b37434)
[ 208.040457] dwc2 30180000.usb: dwc2_hsotg_ep_disable: DxEPCTL=0x08020400
[ 208.061914] gs_close: before spin_unlock_irq 1: tty->driver_data is baf4a00d
[ 208.061980] 8<--- cut here ---
[ 208.062283] Unable to handle kernel paging request at virtual
address 00766500
[ 208.062934] pgd = b41c9e7b
[ 208.063189] [00766500] *pgd=00000000
[ 208.063528] Internal error: Oops: 5 [#1] SMP ARM
[ 208.063945] Modules linked in: usb_f_acm u_serial libcomposite
configfs zram zsmalloc emlog(O) rtc_rk808 clk_rk808 spi_rockchip
wdtoken(O) [last unloaded: g_serial]
[ 208.065303] CPU: 0 PID: 1203 Comm: sh Tainted: G O 5.4.21 #1
[ 208.065923] Hardware name: Rockchip (Device Tree)
[ 208.066364] PC is at __cancel_work_timer+0x64/0x200
[ 208.066819] LR is at try_to_grab_pending+0x44/0x1a0
[ 208.067257] pc : [<c0153c70>] lr : [<c0152a34>] psr: 20010093
[ 208.067818] sp : c5d91e98 ip : 00000000 fp : c094e8c8
[ 208.068289] r10: 00000000 r9 : c648fb7c r8 : c5c88f00
[ 208.068760] r7 : 00000000 r6 : 00000000 r5 : c648d204 r4 : c5d90000
[ 208.069343] r3 : 00766500 r2 : 00766565 r1 : c648d204 r0 : 00000000
[ 208.069933] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM
Segment none
[ 208.070581] Control: 10c5387d Table: 6591006a DAC: 00000051
[ 208.071102] Process sh (pid: 1203, stack limit = 0x7c1578a9)
[ 208.071614] Stack: (0xc5d91e98 to 0xc5d92000)
[ 208.072012] 1e80:
60010013 c04a2f50
[ 208.072745] 1ea0: c648fa00 00000000 00000000 c5c8c580 c5c88f00
c0c05c88 00000000 c648fa00
[ 208.073478] 1ec0: c648fa00 00000000 c5c8c580 c049af84 c0c6f3b4
c049b080 c648fa00 00000000
[ 208.074211] 1ee0: c648fba8 c049be10 00000000 00000000 00000178
c648fb04 c648fb04 c09883c0
[ 208.074944] 1f00: 8010000a c5c88f00 000e0003 c5907398 c720a850
c6e68cc0 00000008 c5c88f08
[ 208.075677] 1f20: 00000000 c02b476c 00000000 00000000 c5d95800
c5d95c54 c0cb15b4 c5d95c3c
[ 208.076411] 1f40: c634aa80 00000000 000000f8 c0157f78 c5d95800
c640b400 c5d90000 c640b440
[ 208.077146] 1f60: ffffe000 c013bf64 0000080f c01165cc b6f09abc
c0c05c88 00000000 000000f8
[ 208.077879] 1f80: 00000000 c013d4b8 00000000 00000004 0050201c
000000f8 c0101204 c013d554
[ 208.078611] 1fa0: 00000000 c0101000 00000000 00000004 00000000
00000000 00503150 00000000
[ 208.079344] 1fc0: 00000000 00000004 0050201c 000000f8 00000000
00000000 00501a78 00000000
[ 208.080077] 1fe0: 00501b28 bec798e4 0048e360 b6e695e4 20010010
00000000 00000000 00000000
[ 208.080831] [<c0153c70>] (__cancel_work_timer) from [<c049af84>]
(release_tty+0x88/0x104)
[ 208.081585] [<c049af84>] (release_tty) from [<c049b080>]
(tty_release_struct+0x34/0x40)
[ 208.082315] [<c049b080>] (tty_release_struct) from [<c049be10>]
(tty_release+0x43c/0x640)
[ 208.083056] [<c049be10>] (tty_release) from [<c02b476c>] (__fput+0x88/0x218)
[ 208.083702] [<c02b476c>] (__fput) from [<c0157f78>] (task_work_run+0xa4/0xc4)
[ 208.084357] [<c0157f78>] (task_work_run) from [<c013bf64>]
(do_exit+0x430/0xaec)
[ 208.085029] [<c013bf64>] (do_exit) from [<c013d4b8>]
(do_group_exit+0x3c/0xc8)
[ 208.085684] [<c013d4b8>] (do_group_exit) from [<c013d554>]
(__wake_up_parent+0x0/0x18)
[ 208.086397] Code: e5953000 e3130004 13c330ff 01a042a3 (15933000)
[ 208.086948] ---[ end trace 9aa9566e42b92f1c ]---
[ 208.087367] Fixing recursive fault but reboot is needed!
The diff I applied was:
@@ -662,6 +662,9 @@ static void gs_close(struct tty_struct *tty,
struct file *file)
struct gs_port *port = tty->driver_data;
struct gserial *gser;
+ pr_debug("gs_close: before spin_unlock_irq 1: tty->driver_data is %p\n",
+ tty->driver_data);
+
spin_lock_irq(&port->port_lock);
if (port->port.count != 1) {
@@ -687,6 +690,10 @@ static void gs_close(struct tty_struct *tty,
struct file *file)
wait_event_interruptible_timeout(port->drain_wait,
gs_close_flush_done(port),
GS_CLOSE_TIMEOUT * HZ);
+
+ pr_debug("gs_close: before spin_unlock_irq 2:
tty->driver_data is %p\n",
+ tty->driver_data);
+
spin_lock_irq(&port->port_lock);
if (port->port.count != 1)
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9 9981-7854 Mobile: +1 (347) 903-9750
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
