Hi Dafna,
Thanks for the patch.
Please see my comments below.
On 2/17/20 4:16 PM, Dafna Hirschfeld wrote:
> don't call 'v4l2_async_notifier_parse_fwnode_endpoints_by_port'
> in order to register async subdevices. Instead call
> 'v4l2_fwnode_endpoint_parse' to parse the remote endpoints
> and then register each async subdev with
> 'v4l2_async_notifier_add_fwnode_remote_subdev'
>
> Also remove the relevant item in the TODO file
>
> Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@xxxxxxxxxxxxx>
> ---
> drivers/staging/media/rkisp1/TODO | 3 -
> drivers/staging/media/rkisp1/rkisp1-dev.c | 96 ++++++++++++++---------
> 2 files changed, 57 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/staging/media/rkisp1/TODO b/drivers/staging/media/rkisp1/TODO
> index 03cd9a4e70f7..8c4d50b5b5fc 100644
> --- a/drivers/staging/media/rkisp1/TODO
> +++ b/drivers/staging/media/rkisp1/TODO
> @@ -1,7 +1,4 @@
> * Fix serialization on subdev ops.
> -* Don't use v4l2_async_notifier_parse_fwnode_endpoints_by_port().
> -e.g. isp_parse_of_endpoints in drivers/media/platform/omap3isp/isp.c
> -cio2_parse_firmware in drivers/media/pci/intel/ipu3/ipu3-cio2.c.
> * Fix pad format size for statistics and parameters entities.
> * Use threaded interrupt for rkisp1_stats_isr(), remove work queue.
> * Fix checkpatch errors.
> diff --git a/drivers/staging/media/rkisp1/rkisp1-dev.c b/drivers/staging/media/rkisp1/rkisp1-dev.c
> index 72ab08a4e42d..922f7bb83530 100644
> --- a/drivers/staging/media/rkisp1/rkisp1-dev.c
> +++ b/drivers/staging/media/rkisp1/rkisp1-dev.c
> @@ -234,35 +234,6 @@ static int rkisp1_subdev_notifier_complete(struct v4l2_async_notifier *notifier)
> return ret;
> }
>
> -static int rkisp1_fwnode_parse(struct device *dev,
> - struct v4l2_fwnode_endpoint *vep,
> - struct v4l2_async_subdev *asd)
> -{
> - struct rkisp1_sensor_async *s_asd =
> - container_of(asd, struct rkisp1_sensor_async, asd);
> -
> - if (vep->bus_type != V4L2_MBUS_CSI2_DPHY) {
> - dev_err(dev, "Only CSI2 bus type is currently supported\n");
> - return -EINVAL;
> - }
> -
> - if (vep->base.port != 0) {
> - dev_err(dev, "The ISP has only port 0\n");
> - return -EINVAL;
> - }
> -
> - s_asd->mbus_type = vep->bus_type;
> - s_asd->lanes = vep->bus.mipi_csi2.num_data_lanes;
> -
> - /* Parallel bus is currently not supported */
> - s_asd->parallel_bus_flags = 0;
> -
> - if (s_asd->lanes < 1 || s_asd->lanes > 4)
> - return -EINVAL;
> -
> - return 0;
> -}
> -
> static const struct v4l2_async_notifier_operations rkisp1_subdev_notifier_ops = {
> .bound = rkisp1_subdev_notifier_bound,
> .unbind = rkisp1_subdev_notifier_unbind,
> @@ -272,23 +243,70 @@ static const struct v4l2_async_notifier_operations rkisp1_subdev_notifier_ops =
> static int rkisp1_subdev_notifier(struct rkisp1_device *rkisp1)
> {
> struct v4l2_async_notifier *ntf = &rkisp1->notifier;
> - struct device *dev = rkisp1->dev;
> + int next_id = 0;
> int ret;
>
> v4l2_async_notifier_init(ntf);
>
> - ret = v4l2_async_notifier_parse_fwnode_endpoints_by_port(dev, ntf,
> - sizeof(struct rkisp1_sensor_async),
> - 0, rkisp1_fwnode_parse);
> - if (ret)
> - return ret;
> + while (1) {
> + struct v4l2_fwnode_endpoint vep = {
> + .bus_type = V4L2_MBUS_CSI2_DPHY
> + };
> + struct rkisp1_sensor_async *rk_asd = NULL;
> + struct fwnode_handle *ep;
>
> - if (list_empty(&ntf->asd_list))
> - return -ENODEV;
> + ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(rkisp1->dev),
> + 0, next_id, FWNODE_GRAPH_ENDPOINT_NEXT);
>
> - ntf->ops = &rkisp1_subdev_notifier_ops;
> + if (!ep) {
> + if (next_id == 0)
> + dev_warn(rkisp1->dev, "no remote subdevice found\n");
This check can be done after the loop, then you can remove the curly braces.
Also, please use if (!next_id)
> + break;
> + }
>
> - return v4l2_async_notifier_register(&rkisp1->v4l2_dev, ntf);
> + ret = v4l2_fwnode_endpoint_parse(ep, &vep);
> + if (ret)
> + goto err_parse;
> +
> + rk_asd = kzalloc(sizeof(*rk_asd), GFP_KERNEL);
> + if (!rk_asd) {
> + ret = -ENOMEM;
> + goto err_parse;
> + }
> +
> + rk_asd->lanes = vep.bus.mipi_csi2.num_data_lanes;
> + rk_asd->mbus_type = vep.bus_type;
> +
> + /* Parallel bus is currently not supported */
> + rk_asd->parallel_bus_flags = 0;
> + ret = v4l2_async_notifier_add_fwnode_remote_subdev(ntf, ep,
> + &rk_asd->asd);
> + if (ret)
> + goto err_parse;
> +
> + dev_dbg(rkisp1->dev, "registered ep id %d with %d lanes\n",
> + vep.base.id, rk_asd->lanes);
> +
> + next_id = vep.base.id + 1;
> +
> + fwnode_handle_put(ep);
> +
> + continue;
> +err_parse:
> + fwnode_handle_put(ep);
> + kfree(rk_asd);
> + v4l2_async_notifier_cleanup(ntf);
> + return ret;
> + }
> +
> + ntf->ops = &rkisp1_subdev_notifier_ops;
> + ret = v4l2_async_notifier_register(&rkisp1->v4l2_dev, ntf);
> + if (ret)
> + goto end;
This is the only place you use the end label, so you could just do a simple:
if (ret) {
v4l2_async_notifier_cleanup(ntf);
return ret;
}
return 0;
> + return 0;
> +end:
> + v4l2_async_notifier_cleanup(ntf);
> + return ret;
> }
>
> /* ----------------------------------------------------------------------------
>
Regards,
Helen
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
