From: Robin Murphy <robin.murphy@xxxxxxx> [ Upstream commit a793e19c15f25a126138ac4ae9facf9204754af3 ] Although it appeared to follow logically from the bindings, apparently the thermal framework can't properly cope with a single cooling device being shared between multiple maps. The CPU zone is probably easier to overheat, so remove the references to the (optional) fan from the GPU cooling zone to avoid things getting confused. Hopefully GPU-intensive tasks will leak enough heat across to the CPU zone to still hit the fan trips before reaching critical GPU temperatures. Signed-off-by: Robin Murphy <robin.murphy@xxxxxxx> Link: https://lore.kernel.org/r/5bb39f3115df1a487d717d3ae87e523b03749379.1573908197.git.robin.murphy@xxxxxxx Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- .../boot/dts/rockchip/rk3399-nanopc-t4.dts | 27 ------------------- 1 file changed, 27 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts index 2a127985ab171..d3ed8e5e770f1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts @@ -94,33 +94,6 @@ }; }; -&gpu_thermal { - trips { - gpu_warm: gpu_warm { - temperature = <55000>; - hysteresis = <2000>; - type = "active"; - }; - - gpu_hot: gpu_hot { - temperature = <65000>; - hysteresis = <2000>; - type = "active"; - }; - }; - cooling-maps { - map1 { - trip = <&gpu_warm>; - cooling-device = <&fan THERMAL_NO_LIMIT 1>; - }; - - map2 { - trip = <&gpu_hot>; - cooling-device = <&fan 2 THERMAL_NO_LIMIT>; - }; - }; -}; - &pinctrl { ir { ir_rx: ir-rx { -- 2.20.1 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-rockchip
