Enable pre console buffer for rk3288 platform. This would help to capture the console messages prior to the console being initialised. Enabling this would help to capture all the console messages on video output source like HDMI. So we can find the full console messages of U-Boot proper on HDMI display when enabled it for RK3288 platform boards. Buffer address used for pre console is 0x0f000000 which is ram base plus 240MiB. right now the Allwinner SoC is using similar computation. Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> --- arch/arm/mach-rockchip/Kconfig | 1 + common/Kconfig | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index 2f260a5c5f..ed7514ab75 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -102,6 +102,7 @@ config ROCKCHIP_RK3288 select SUPPORT_SPL select SPL select SUPPORT_TPL + imply PRE_CONSOLE_BUFFER imply ROCKCHIP_COMMON_BOARD imply SPL_ROCKCHIP_COMMON_BOARD imply TPL_CLK diff --git a/common/Kconfig b/common/Kconfig index a7c5ba278a..21d0244050 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -567,6 +567,7 @@ config PRE_CON_BUF_ADDR depends on PRE_CONSOLE_BUFFER default 0x2f000000 if ARCH_SUNXI && MACH_SUN9I default 0x4f000000 if ARCH_SUNXI && !MACH_SUN9I + default 0x0f000000 if ROCKCHIP_RK3288 help This sets the start address of the pre-console buffer. This must be in available memory and is accessed before relocation and -- 2.18.0.321.gffc6fa0e3 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-rockchip
