On Tue, Jan 14, 2020 at 03:22:55PM +0800, Shawn Lin wrote:
> This IP could supports USB3.0 and PCIe.
>
> Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
>
> ---
>
> .../bindings/phy/rockchip,inno-combophy.yaml | 84 ++++++++++++++++++++++
> 1 file changed, 84 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/rockchip,inno-combophy.yaml
Fails 'make dt_binding_check':
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/rockchip,inno-combophy.yaml:
ignoring, error in schema: properties: rockchip,combphygrf
Documentation/devicetree/bindings/display/simple-framebuffer.example.dts:21.16-37.11:
Warning (chosen_node_is_root): /example-0/chosen: chosen node must be at root node
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/rockchip,inno-combophy.yaml:
properties:rockchip,combphygrf: {'items': [{'description': 'The grf for
COMBPHY configuration and state registers.'}]} is not valid under any of
the given schemas (Possible causes of the failure):
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/rockchip,inno-combophy.yaml:
properties:rockchip,combphygrf: 'description' is a required property
>
> diff --git a/Documentation/devicetree/bindings/phy/rockchip,inno-combophy.yaml b/Documentation/devicetree/bindings/phy/rockchip,inno-combophy.yaml
> new file mode 100644
> index 0000000..d647ab3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/rockchip,inno-combophy.yaml
> @@ -0,0 +1,84 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/rockchip,inno-combophy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rockchip USB3.0/PCI-e combo phy
> +
> +maintainers:
> + - Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
> + - William Wu <william.wu@xxxxxxxxxxxxxx>
2 space indent.
> +
> +properties:
> + "#phy-cells":
> + const: 1
> +
> + compatible:
> + enum:
> + - rockchip,rk1808-combphy
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: PLL reference clock
> +
> + clock-names:
> + items:
> + - const: refclk
> +
> + resets:
> + items:
> + - description: OTG unit reset line
> + - description: POR unit reset line
> + - description: APB interface reset line
> + - description: PIPE unit reset line
> +
> + reset-names:
> + items:
> + - const: otg-rst
> + - const: combphy-por
> + - const: combphy-apb
> + - const: combphy-pipe
> +
> + rockchip,combphygrf:
> + items:
> + - description: The grf for COMBPHY configuration and state registers.
> +
> +required:
> + - "#phy-cells"
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - resets
> + - reset-names
> + - rockchip,combphygrf
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + combphy_grf: syscon@fe018000 {
> + compatible = "rockchip,usb3phy-grf", "syscon";
> + reg = <0x0 0xfe018000 0x0 0x8000>;
> + };
> +
> + combphy: phy@ff380000 {
> + compatible = "rockchip,rk1808-combphy";
> + reg = <0x0 0xff380000 0x0 0x10000>;
> + #phy-cells = <1>;
> + clocks = <&cru SCLK_PCIEPHY_REF>;
> + clock-names = "refclk";
> + assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
> + assigned-clock-rates = <25000000>;
> + resets = <&cru SRST_USB3_OTG_A>, <&cru SRST_PCIEPHY_POR>,
> + <&cru SRST_PCIEPHY_P>, <&cru SRST_PCIEPHY_PIPE>;
> + reset-names = "otg-rst", "combphy-por",
> + "combphy-apb", "combphy-pipe";
> + rockchip,combphygrf = <&combphy_grf>;
> + };
> +
> +...
> --
> 1.9.1
>
>
>
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
