Hi Ezequiel, On Tue, Jan 07, 2020 at 10:45:15AM -0300, Ezequiel Garcia wrote: > On Tue, 2020-01-07 at 01:59 +0200, Laurent Pinchart wrote: > > On Fri, Dec 27, 2019 at 05:01:13PM -0300, Helen Koike wrote: > > > Add yaml DT bindings for Rockchip ISP1. > > > > > > This was tested and verified with: > > > mv drivers/staging/media/rkisp1/Documentation/devicetree/bindings/media/rockchip-isp1.yaml Documentation/devicetree/bindings/media/ > > > make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/media/rockchip-isp1.yaml > > > make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/media/rockchip-isp1.yaml > > > > > > Signed-off-by: Helen Koike <helen.koike@xxxxxxxxxxxxx> > > > > > > --- > > > > > > Changes in v12: > > > - The commit replaces the following commit in previous series named > > > media: staging: dt-bindings: Document the Rockchip ISP1 bindings > > > This new patch adds yaml binding and was verified with > > > make dtbs_check and make dt_binding_check > > > > > > Changes in v11: > > > - add clock-names values > > > > > > Changes in v10: > > > - unsquash > > > > > > Changes in v9: > > > - squash > > > - move to staging > > > > > > Changes in v8: > > > - fix title division style > > > > > > Changes in v7: > > > - update document with new design and tested example > > > > > > .../bindings/media/rockchip-isp1.yaml | 193 ++++++++++++++++++ > > > 1 file changed, 193 insertions(+) > > > create mode 100644 drivers/staging/media/rkisp1/Documentation/devicetree/bindings/media/rockchip-isp1.yaml > > > > > > diff --git a/drivers/staging/media/rkisp1/Documentation/devicetree/bindings/media/rockchip-isp1.yaml > > > b/drivers/staging/media/rkisp1/Documentation/devicetree/bindings/media/rockchip-isp1.yaml > > > new file mode 100644 > > > index 000000000000..4d1b2c67a4cd > > > --- /dev/null > > > +++ b/drivers/staging/media/rkisp1/Documentation/devicetree/bindings/media/rockchip-isp1.yaml > > > @@ -0,0 +1,193 @@ > > > +# SPDX-License-Identifier: (GPL-2.0+ OR MIT) > > > +%YAML 1.2 > > > +--- > > > +$id: http://devicetree.org/schemas/media/rockchip-isp1.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: Rockchip SoC Image Signal Processing unit v1 > > > + > > > +maintainers: > > > + - Helen Koike <helen.koike@xxxxxxxxxxxxx> > > > + > > > +description: | > > > + Rockchip ISP1 is the Camera interface for the Rockchip series of SoCs > > > + which contains image processing, scaling, and compression funcitons. > > > + > > > +properties: > > > + compatible: > > > + const: rockchip,rk3399-cif-isp > > > + > > > + reg: > > > + maxItems: 1 > > > + > > > + interrupts: > > > + maxItems: 1 > > > + > > > + iommus: > > > + maxItems: 1 > > > + > > > + power-domains: > > > + maxItems: 1 > > > + > > > + phys: > > > + maxItems: 1 > > > + description: phandle for the PHY port > > > > According to http://opensource.rock-chips.com/wiki_Camera_driver, RK3388 > > can route either of DPHY RX0 or DPHY RX1 to the single ISP instance, > > while RK3399 has one PHY per ISP instance, with DPHY RX1 being shared > > with the display. Have you given any thought on how we will support this > > in a backward-compatible way in the DT bindings ? > > As discussed on IRC, we could have multiple PHYs specifiers > in the phy property. The ISP would have multiple ports, > with one PHY per port. > > > > + > > > + phy-names: > > > + const: dphy > > > + > > > + clocks: > > > + items: > > > + - description: ISP clock > > > + - description: ISP aclk clock > > > + - description: ISP aclk wrapper clock > > > + - description: ISP hclk clock > > > + - description: ISP hclk wrapper clock > > > > I wonder what aclk and hclk stand far. In any case those names match the > > CRU documentation, so that seems fine. > > IIRC, traditionally, Rockchip calls aclk to the AXI clock, > and hclk to the AHB. We'll improve this description. > > > > + > > > + clock-names: > > > + items: > > > + - const: clk_isp > > > + - const: aclk_isp > > > + - const: aclk_isp_wrap > > > + - const: hclk_isp > > > + - const: hclk_isp_wrap > > > + > > I wonder if we should better amend the names as well. We could, but they match the names in the CRU documentation, so I think they're fine. > > > + # See ./video-interfaces.txt for details > > > + ports: > > > + type: object > > > + additionalProperties: false > > > + > > > + properties: > > > + "#address-cells": > > > + const: 1 > > > + > > > + "#size-cells": > > > + const: 0 > > > + > > > + port@0: > > > + type: object > > > + additionalProperties: false > > > > I think this should have a description to tell what this port > > corresponds to. > > OK. > > > > + > > > + properties: > > > + "#address-cells": > > > + const: 1 > > > + > > > + "#size-cells": > > > + const: 0 > > > + > > > + reg: > > > + const: 0 > > > + description: port identifier. > > > > Here and for the endpoint below the description is probably not needed. > > OK. > > > > + > > > + patternProperties: > > > + endpoint: > > > + type: object > > > + additionalProperties: false > > > + > > > + properties: > > > + reg: > > > + maxItems: 1 > > > + description: endpoint identifier. > > > + > > > + data-lanes: > > > + minItems: 1 > > > + maxItems: 4 > > > + > > > + remote-endpoint: true > > > + > > > + required: > > > + - port@0 > > > + > > > +required: > > > + - compatible > > > + - interrupts > > > + - clocks > > > + - clock-names > > > + - power-domains > > > + - iommus > > > + - phys > > > + - phy-names > > > + - ports > > > + > > > +additionalProperties: false > > > + > > > +examples: > > > + - | > > > + > > > + #include <dt-bindings/clock/rk3399-cru.h> > > > + #include <dt-bindings/interrupt-controller/arm-gic.h> > > > + #include <dt-bindings/power/rk3399-power.h> > > > + > > > + parent0: parent@0 { > > > + #address-cells = <2>; > > > + #size-cells = <2>; > > > + > > > + isp0: isp0@ff910000 { > > > + compatible = "rockchip,rk3399-cif-isp"; > > > + reg = <0x0 0xff910000 0x0 0x4000>; > > > + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>; > > > + clocks = <&cru SCLK_ISP0>, > > > + <&cru ACLK_ISP0>, <&cru ACLK_ISP0_WRAPPER>, > > > + <&cru HCLK_ISP0>, <&cru HCLK_ISP0_WRAPPER>; > > > + clock-names = "clk_isp", > > > + "aclk_isp", "aclk_isp_wrap", > > > + "hclk_isp", "hclk_isp_wrap"; > > > + power-domains = <&power RK3399_PD_ISP0>; > > > + iommus = <&isp0_mmu>; > > > + phys = <&dphy>; > > > + phy-names = "dphy"; > > > + > > > + ports { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + port@0 { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + reg = <0>; > > > + > > > + mipi_in_wcam: endpoint@0 { > > > + reg = <0>; > > > + remote-endpoint = <&wcam_out>; > > > + data-lanes = <1 2>; > > > + }; > > > + > > > + mipi_in_ucam: endpoint@1 { > > > + reg = <1>; > > > + remote-endpoint = <&ucam_out>; > > > + data-lanes = <1>; > > > + }; > > > > Are those two cameras connected to the same CSI-2 lines with at most one > > sensor out of reset ? > > Indeed, these are two cameras connected to the same DPHY, > and only one can work at a time. > > > With the above small issues addressed, > > > > Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> -- Regards, Laurent Pinchart _______________________________________________ Linux-rockchip mailing list Linux-rockchip@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-rockchip
