Hi Heiko, Laurent, On Tue, 2020-01-07 at 10:28 +0100, Heiko Stübner wrote: > Am Dienstag, 7. Januar 2020, 03:37:21 CET schrieb Laurent Pinchart: > > On Mon, Jan 06, 2020 at 11:06:12PM -0300, Ezequiel Garcia wrote: > > > On Tue, 2020-01-07 at 02:10 +0200, Laurent Pinchart wrote: > > > > Hi Helen, > > > > > > > > Thank you for the patch. > > > > > > > > On Fri, Dec 27, 2019 at 05:01:14PM -0300, Helen Koike wrote: > > > > > Add yaml DT bindings for Rockchip MIPI D-PHY RX > > > > > > > > > > This was tested and verified with: > > > > > mv drivers/staging/media/phy-rockchip-dphy/Documentation/devicetree/bindings/phy/rockchip-mipi- > > > > > dphy.yaml Documentation/devicetree/bindings/phy/ > > > > > make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/phy/rockchip-mipi-dphy.yaml > > > > > make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/phy/rockchip-mipi-dphy.yaml > > > > > > > > > > Signed-off-by: Helen Koike <helen.koike@xxxxxxxxxxxxx> > > > > > > > > > > --- > > > > > > > > > > Changes in v12: > > > > > - The commit replaces the following commit in previous series named > > > > > media: staging: dt-bindings: Document the Rockchip MIPI RX D-PHY bindings > > > > > This new patch adds yaml binding and was verified with > > > > > make dtbs_check and make dt_binding_check > > > > > > > > > > Changes in v11: None > > > > > Changes in v10: > > > > > - unsquash > > > > > > > > > > Changes in v9: > > > > > - fix title division style > > > > > - squash > > > > > - move to staging > > > > > > > > > > Changes in v8: None > > > > > Changes in v7: > > > > > - updated doc with new design and tested example > > > > > > > > > > .../bindings/phy/rockchip-mipi-dphy.yaml | 75 +++++++++++++++++++ > > > > > 1 file changed, 75 insertions(+) > > > > > create mode 100644 drivers/staging/media/phy-rockchip-dphy/Documentation/devicetree/bindings/phy/rockchip-mipi-dphy.yaml > > > > > > > > > > diff --git a/drivers/staging/media/phy-rockchip-dphy/Documentation/devicetree/bindings/phy/rockchip-mipi-dphy.yaml > > > > > b/drivers/staging/media/phy- > > > > > rockchip-dphy/Documentation/devicetree/bindings/phy/rockchip-mipi-dphy.yaml > > > > > new file mode 100644 > > > > > index 000000000000..af97f1b3e005 > > > > > --- /dev/null > > > > > +++ b/drivers/staging/media/phy-rockchip-dphy/Documentation/devicetree/bindings/phy/rockchip-mipi-dphy.yaml > > > > > @@ -0,0 +1,75 @@ > > > > > +# SPDX-License-Identifier: (GPL-2.0+ OR MIT) > > > > > +%YAML 1.2 > > > > > +--- > > > > > +$id: http://devicetree.org/schemas/phy/rockchip-mipi-dphy.yaml# > > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > > > + > > > > > +title: Rockchip SoC MIPI RX0 D-PHY Device Tree Bindings > > > > > > > > Should this be s/RX0/RX/ ? Or do you expect different bindings for RX1 ? > > > > > > The driver currently only supports RX0, but I think you are right, > > > it should say RX here. This binding could be extended for RX1. > > > > > > > Looking at the PHY driver, it seems to handle all PHYs with a single > > > > struct device. Should we thus use #phy-cells = <1> to select the PHY ? > > > > > > I am not following this. The driver handles just one PHY. Each PHY > > > should have its own node. > > > > Looking at the registers, it seems that the different PHYs are > > intertwined and we would could have trouble handling the different PHYs > > with different DT nodes and thus struct device instances. > > I have to confess to not following _ALL_ of the threads, so may say > something stupid, but I don't think the PHYs are intertwined so much. > > Where RX0 is controlled from the "General Register Files" alone > [register dumping ground for soc designers], the TX1RX1-phy > actually gets controlled from inside the dsi1 register area it seems. > > So in my previous (still unsucessful) tests, I was rolling with something like > https://github.com/mmind/linux-rockchip/commit/e0d4b03976d2aab85a8c1630be937ea003b5df88 > > With the actual "logic" picked from the vendor kernel, that just double- > maps the dsi1-registers in both dsi and dphy driver, which was strange. > > Describing each PHY in its own device node (as we currently do) results in: mipi_dphy_tx1rx1: mipi-dphy-tx1rx1@ff968000 { compatible = "rockchip,rk3399-mipi-dphy"; reg = <0x0 0xff968000 0x0 0x8000>; rockchip,grf = <&grf>; }; grf: syscon@ff770000 { mipi_dphy_rx0: mipi-dphy-rx0 { compatible = "rockchip,rk3399-mipi-dphy"; }; }; Which is mildly ugly, as it uses two mechanism to describe the GRF resource. In addition, the driver will then _infer_ which device node is RX0 and which is TX1RX1, from this. Perhaps Laurent's proposal, describing each PHY explicitly, would be cleaner? Thanks, Ezequiel _______________________________________________ Linux-rockchip mailing list Linux-rockchip@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-rockchip
