Hi Markus, I've only gotten patches 3+5 of this series (vendor-prefix+dts patch), so maybe you could teach your git-send-email to include all patches to all recipients. Am Samstag, 4. Januar 2020, 16:32:44 CET schrieb Markus Reichl: > On rk3399-roc-pc board a voltage regulator MP8859 from Monolithic Power Systems > is used to supply the 12V power line. This delivers 5V as a default value after > boot. The voltage is controllable via I2C. > Add a basic driver to set and get the voltage of the MP8859 and add a matching > node with fixed 12V in the DT of the board. > > Markus Reichl (5): > regulator: mp8859: add driver > regulator: mp8859: add config option and build entry I think these two should only need one patch together. Heiko > dt-bindings: add vendor Monolithic Power Systems > dt-bindings: regulator: add MPS mp8859 voltage regulator > arm64: dts: rockchip: Enable mp8859 regulator on rk3399-roc-pc > > .../devicetree/bindings/regulator/mp8859.txt | 22 +++ > .../devicetree/bindings/vendor-prefixes.yaml | 2 + > .../boot/dts/rockchip/rk3399-roc-pc.dtsi | 32 ++-- > drivers/regulator/Kconfig | 11 ++ > drivers/regulator/Makefile | 1 + > drivers/regulator/mp8859.c | 156 ++++++++++++++++++ > 6 files changed, 210 insertions(+), 14 deletions(-) > create mode 100644 Documentation/devicetree/bindings/regulator/mp8859.txt > create mode 100644 drivers/regulator/mp8859.c > > _______________________________________________ Linux-rockchip mailing list Linux-rockchip@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-rockchip
