Hi Kishon/Rob,
On Fri, Dec 13, 2019 at 8:48 AM Lad Prabhakar
<prabhakar.csengg@xxxxxxxxx> wrote:
>
> From: "Lad, Prabhakar" <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
>
> This patch adds the bindings for the R-Car PCIe endpoint driver.
>
> Signed-off-by: Lad, Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> ---
> .../devicetree/bindings/pci/rcar-pci-ep.txt | 37 ++++++++++++++++++++++
> 1 file changed, 37 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pci/rcar-pci-ep.txt
>
> diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-ep.txt b/Documentation/devicetree/bindings/pci/rcar-pci-ep.txt
> new file mode 100644
> index 0000000..7f0a97e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/rcar-pci-ep.txt
> @@ -0,0 +1,37 @@
> +* Renesas R-Car PCIe Endpoint Controller DT description
> +
> +Required properties:
> + "renesas,pcie-ep-r8a774c0" for the R8A774C0 SoC;
> + "renesas,pcie-ep-rcar-gen3" for a generic R-Car Gen3 or
> + RZ/G2 compatible device.
> +
> + When compatible with the generic version, nodes must list the
> + SoC-specific version corresponding to the platform first
> + followed by the generic version.
> +
> +- reg: base address and length of the PCIe controller registers.
> +- outbound-ranges: outbound windows base address and length including the flags.
> +- resets: Must contain phandles to PCIe-related reset lines exposed by IP block
> +- clocks: from common clock binding: clock specifiers for the PCIe controller
> + clock.
> +- clock-names: from common clock binding: should be "pcie".
> +
> +Optional Property:
> +- max-functions: Maximum number of functions that can be configured (default 1).
> +
> +Example:
> +
> +SoC-specific DT Entry:
> +
> + pcie_ep: pcie_ep@fe000000 {
> + compatible = "renesas,pcie-ep-r8a774c0", "renesas,pcie-rcar-gen2";
> + reg = <0 0xfe000000 0 0x80000>;
> + outbound-ranges = <0xa 0x0 0xfe100000 0 0x000100000
> + 0xa 0x0 0xfe200000 0 0x000200000
> + 0x6 0x0 0x30000000 0 0x008000000
> + 0x6 0x0 0x38000000 0 0x008000000>;
> + clocks = <&cpg CPG_MOD 319>;
> + clock-names = "pcie";
> + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
> + resets = <&cpg 319>;
> + };
Now that I have dropped "outbound-ranges", do the below bindings look good ?
- reg-names: Must include the following names
- "apb-base" - Controller base
- "memory0" - memory window 0 used by the host to map the pci address locally
- "memory1" - memory window 1 used by the host to map the pci address locally
- "memory2" - memory window 2 used by the host to map the pci address locally
- "memory3" - memory window 3 used by the host to map the pci address locally
pcie-ep: pcie_ep@fe000000 {
compatible = "renesas,pcie-r8a774c0", "renesas,pcie-rcar-gen2";
reg = <0 0xfe000000 0 0x80000>,
<0x0 0xfe100000 0 0x100000>,
<0x0 0xfe200000 0 0x200000>,
<0x0 0x30000000 0 0x8000000>,
<0x0 0x38000000 0 0x8000000>;
reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
clocks = <&cpg CPG_MOD 319>;
clock-names = "pcie";
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
resets = <&cpg 319>;
};
Cheers,
--Prabhakar
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
