Downstream RK3328 DTBs describe a CPU idle state matching that present
on other SoCs like RK3399. This works with upstream Trusted Firmware-A
too, so let's add it here.
Signed-off-by: Robin Murphy <robin.murphy@xxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 7df7daa188df..d71187cdd430 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -41,6 +41,7 @@
reg = <0x0 0x0>;
clocks = <&cru ARMCLK>;
#cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SLEEP>;
dynamic-power-coefficient = <120>;
enable-method = "psci";
next-level-cache = <&l2>;
@@ -53,6 +54,7 @@
reg = <0x0 0x1>;
clocks = <&cru ARMCLK>;
#cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SLEEP>;
dynamic-power-coefficient = <120>;
enable-method = "psci";
next-level-cache = <&l2>;
@@ -65,6 +67,7 @@
reg = <0x0 0x2>;
clocks = <&cru ARMCLK>;
#cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SLEEP>;
dynamic-power-coefficient = <120>;
enable-method = "psci";
next-level-cache = <&l2>;
@@ -77,12 +80,26 @@
reg = <0x0 0x3>;
clocks = <&cru ARMCLK>;
#cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SLEEP>;
dynamic-power-coefficient = <120>;
enable-method = "psci";
next-level-cache = <&l2>;
operating-points-v2 = <&cpu0_opp_table>;
};
+ idle-states {
+ entry-method = "psci";
+
+ CPU_SLEEP: cpu-sleep {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <120>;
+ exit-latency-us = <250>;
+ min-residency-us = <900>;
+ };
+ };
+
l2: l2-cache0 {
compatible = "cache";
};
--
2.17.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
