Apparently I wasn't paying enough attention... And nor is the lazy
test of `cat /dev/lirc0` sufficiently blunder-proof. Oh well, with
the correct polarity, let's also hook up a keymap now that one for
the standard Beelink remote has handily appeared.
Signed-off-by: Robin Murphy <robin.murphy@xxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3328-a1.dts | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
index 76b49f573101..16f1656d5203 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
@@ -49,7 +49,8 @@
ir-receiver {
compatible = "gpio-ir-receiver";
- gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+ linux,rc-map-name = "rc-beelink-gs1";
};
};
--
2.17.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
