Hi Miquel, Am Freitag, 6. Dezember 2019, 16:42:47 CET schrieb Miquel Raynal: > PMIC interrupt can be active high or active low depending on BIT(1) of > the GPIO_INT_CFG pin. The default is 0x1, which means active > high. Change the polarity in the device tree to reflect the default > state. > > Without this and with the current code base, the interrupt never stops > triggering while the MFD driver does not see anything to > check/clear/mask so after 100000 spurious IRQs, the kernel simply > desactivates the interrupt: > > irq 36: nobody cared (try booting with the "irqpoll" option) > [...] > handlers: > [<(____ptrval____)>] irq_default_primary_handler threaded > [<(____ptrval____)>] regmap_irq_thread > Disabling IRQ #36 > > Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx> *coughs slightly* mfd: rk808: Set RK817 interrupt polarity to low https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git/commit/drivers/mfd/rk808.c?h=for-mfd-next&id=dbd16ef53487084816a20f662423ab543a75fc83 Should be in the current merge window already I guess ;-) Having this consistent over all rk8xx seemed nicer. Heiko > --- > arch/arm64/boot/dts/rockchip/px30-evb.dts | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts > index 869f90cbf0da..a922ea75639d 100644 > --- a/arch/arm64/boot/dts/rockchip/px30-evb.dts > +++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts > @@ -138,7 +138,7 @@ > compatible = "rockchip,rk809"; > reg = <0x20>; > interrupt-parent = <&gpio0>; > - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; > + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; > pinctrl-names = "default"; > pinctrl-0 = <&pmic_int>; > rockchip,system-power-controller; > _______________________________________________ Linux-rockchip mailing list Linux-rockchip@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-rockchip
