Re: [PATCH 0/5] add rk3328 usb3 phy driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2019-10-28 6:41 pm, Robin Murphy wrote:
On 28/10/2019 18:22, Peter Geis wrote:
It took a lot more effort than originally anticipated, but here it is.
This is the driver from [0], updated to work with the current kernel.
I've tested it on the rk3328-roc-cc board, both usb 2.0 and usb 3.0
devices detect on hotplug.

Thanks Peter, I'll try to give this a go on my box for confirmation.

OK, I hooked it up with a vbus-drv-gpio hacked in - USB 2.0 unplug/replug does indeed work fine, but it takes a while to acknowledge an unplug of a USB 3.0 device, and throws a bunch of errors every time:

[  288.229568] usb usb4-port1: Cannot enable. Maybe the USB cable is bad?
[  290.809599] usb usb4-port1: Cannot enable. Maybe the USB cable is bad?
[  293.389594] usb usb4-port1: Cannot enable. Maybe the USB cable is bad?
[  295.969600] usb usb4-port1: Cannot enable. Maybe the USB cable is bad?
[  295.970418] usb 4-1: USB disconnect, device number 10
[  299.209631] usb usb4-port1: Cannot enable. Maybe the USB cable is bad?
[  301.789655] usb usb4-port1: Cannot enable. Maybe the USB cable is bad?
[  301.790534] usb usb4-port1: attempt power cycle

(although new devices are still detected OK eventually)

Robin.

One quick comment is that it might be worth importing the version from Rockchip's own kernel tree, as that includes this additional patch which looks like a welcome improvement:

https://github.com/rockchip-linux/kernel/commit/12efa9acad65b4c3256683c1ccd769687be3ca56#diff-b6317b3425ac054be551abdcda910b68

Also, as it's a new phy driver, we should keep Kishon (+cc) in the loop as the subsystem maintainer.

Robin.

[0] https://github.com/FireflyTeam/kernel/commits/roc-rk3328-cc/drivers/phy/rockchip/phy-rockchip-inno-usb3.c

Peter Geis (5):
   phy: rockchip: add inno-usb3 phy driver
   dt-bindings: clean up rockchip grf binding document
   Documentation: bindings: add dt documentation for rockchip usb3 phy
   arm64: dts: rockchip: add usb3 to rk3328 devicetree
   arm64: dts: rockchip: enable usb3 on rk3328-roc-cc

  .../bindings/phy/phy-rockchip-inno-usb3.yaml  |  157 +++
  .../devicetree/bindings/soc/rockchip/grf.txt  |    8 +-
  .../devicetree/bindings/usb/rockchip,dwc3.txt |    9 +-
  .../arm64/boot/dts/rockchip/rk3328-roc-cc.dts |   21 +
  arch/arm64/boot/dts/rockchip/rk3328.dtsi      |   72 ++
  drivers/phy/rockchip/Kconfig                  |    9 +
  drivers/phy/rockchip/Makefile                 |    1 +
  drivers/phy/rockchip/phy-rockchip-inno-usb3.c | 1107 +++++++++++++++++
  8 files changed, 1378 insertions(+), 6 deletions(-)
  create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb3.yaml
  create mode 100644 drivers/phy/rockchip/phy-rockchip-inno-usb3.c


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip




[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux