Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> writes:
> Add 0x330a for rk3399 gadget product number.
>
> Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
> ---
> drivers/usb/gadget/Kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
> index 2da8b40e05..b0e61f3fcd 100644
> --- a/drivers/usb/gadget/Kconfig
> +++ b/drivers/usb/gadget/Kconfig
> @@ -61,7 +61,7 @@ config USB_GADGET_PRODUCT_NUM
> default 0x310a if ROCKCHIP_RK3036
> default 0x310c if ROCKCHIP_RK3128
> default 0x320a if ROCKCHIP_RK3229 || ROCKCHIP_RK3288
> - default 0x330a if ROCKCHIP_RK3328
> + default 0x330a if ROCKCHIP_RK3328 || ROCKCHIP_RK3399
> default 0x0
> help
> Product ID of the USB device emulated, reported to the host device.
With 0x330a, the device shown in `lsusb` is:
Bus 002 Device 024: ID 2207:330a Fuzhou Rockchip Electronics Company RK3368 in Mask ROM mode
While using 0x330c, the device shown in `lsusb` is:
Bus 002 Device 025: ID 2207:330c Fuzhou Rockchip Electronics Company RK3399 in Mask ROM mode
Therefore, this should be modified to use 0x330c:
+ default 0x330c if ROCKCHIP_RK3399
Thanks
--
Levin Du
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
