Am Samstag, 21. September 2019, 15:14:57 CEST schrieb Hugh Cole-Baker: > Fix the pinctrl and interrupt specifier for RK808 to use GPIO3_B2. On the > Rockpro64 schematic [1] page 16, it shows GPIO3_B2 used for the interrupt > line PMIC_INT_L from the RK808, and there's a note which translates as: > "PMU termination GPIO1_C5 changed to this". > > Tested by setting an RTC wakealarm and checking /proc/interrupts counters. > Without this patch, neither the rockchip_gpio_irq counter for the RK808, > nor the RTC alarm counter increment when the alarm time is reached. > With this patch, both interrupt counters increment by 1 as expected. > > [1] http://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf > > Fixes: e4f3fb4 ("arm64: dts: rockchip: add initial dts support for Rockpro64") > Signed-off-by: Hugh Cole-Baker <sigmaris@xxxxxxxxx> applied as fix for 5.4 Thanks Heiko _______________________________________________ Linux-rockchip mailing list Linux-rockchip@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-rockchip
