The px30-evb exposes uart2 through a uart-to-usb converter on the board
but these pins are shared with the sdmmc controller. With both activated
this results in a race condition depending in the probe order.
Whichever of the two probes first will break the other peripheral.
The px30-evb also exposes uart5 through pin its pin headers, so it's way
saner to use these pins for serial output and keep the sdmmc working in
all cases.
Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/px30-evb.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts
index 6d50f6abcb48..80524afe94da 100644
--- a/arch/arm64/boot/dts/rockchip/px30-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts
@@ -14,7 +14,7 @@
compatible = "rockchip,px30-evb", "rockchip,px30";
chosen {
- stdout-path = "serial2:1500000n8";
+ stdout-path = "serial5:115200n8";
};
adc-keys {
@@ -454,7 +454,7 @@
status = "okay";
};
-&uart2 {
+&uart5 {
status = "okay";
};
--
2.20.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
