Hi Ezequiel,
On Tue, 2019-09-03 at 14:12 -0300, Ezequiel Garcia wrote:
> Commit 953aaa1492c53 ("media: rockchip/vpu: Prepare things to support decoders")
> changed the conditions under S_FMT was allowed for OUTPUT
> CAPTURE buffers.
>
> However, and according to the mem-to-mem stateless decoder specification,
> in order to support dynamic resolution changes, S_FMT should be allowed
> even if OUTPUT buffers have been allocated.
>
> Relax decoder S_FMT restrictions on OUTPUT buffers, allowing a resolution
> modification, provided the pixel format stays the same.
>
> Tested on RK3288 platforms using ChromiumOS Video Decode/Encode Accelerator Unittests.
>
> Fixes: 953aaa1492c53 ("media: rockchip/vpu: Prepare things to support decoders")
> Signed-off-by: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx>
> ---
> drivers/staging/media/hantro/hantro_v4l2.c | 22 ++++++++++++++++------
> 1 file changed, 16 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/staging/media/hantro/hantro_v4l2.c b/drivers/staging/media/hantro/hantro_v4l2.c
> index 3dae52abb96c..d48b548842cf 100644
> --- a/drivers/staging/media/hantro/hantro_v4l2.c
> +++ b/drivers/staging/media/hantro/hantro_v4l2.c
> @@ -367,19 +367,22 @@ vidioc_s_fmt_out_mplane(struct file *file, void *priv, struct v4l2_format *f)
> {
> struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp;
> struct hantro_ctx *ctx = fh_to_ctx(priv);
> + struct vb2_queue *vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
> const struct hantro_fmt *formats;
> unsigned int num_fmts;
> - struct vb2_queue *vq;
> int ret;
>
> - /* Change not allowed if queue is busy. */
> - vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
> - if (vb2_is_busy(vq))
> - return -EBUSY;
> -
> if (!hantro_is_encoder_ctx(ctx)) {
> struct vb2_queue *peer_vq;
>
> + /*
> + * In other to support dynamic resolution change,
> + * the decoder admits a resolution change, as long
> + * as the pixelformat remains. Can't be done if streaming.
> + */
> + if (vb2_is_streaming(vq) || (vb2_is_busy(vq) &&
> + pix_mp->pixelformat != ctx->src_fmt.pixelformat))
Before using contents of the v4l2_format f for comparison, we should run
vidioc_try_fmt_out_mplane over it. Also, besides pixelformat, sizeimage
shouldn't change either, at least if this is a VB2_MMAP queue.
> + return -EBUSY;
> /*
> * Since format change on the OUTPUT queue will reset
> * the CAPTURE queue, we can't allow doing so
> @@ -389,6 +392,13 @@ vidioc_s_fmt_out_mplane(struct file *file, void *priv, struct v4l2_format *f)
> V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE);
> if (vb2_is_busy(peer_vq))
> return -EBUSY;
> + } else {
> + /*
> + * The encoder doesn't admit a format change if
> + * there are OUTPUT buffers allocated.
> + */
> + if (vb2_is_busy(vq))
> + return -EBUSY;
> }
>
> ret = vidioc_try_fmt_out_mplane(file, priv, f);
I think this needs to be moved up.
regards
Philipp
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
