On 22/08/2019 17:06, Jack Mitchell wrote: > I'm having issues on a Firefly rk3288 board when trying to use USB > gadget ethernet on macOS. The dr_mode is set to "otg" and it works fine > with my Linux desktop. > > If I set the dr_mode to "peripheral" macOS will work, but still takes > around 10 seconds to enumerate the device which makes me think it's only > just working. However, I need the port to be in "otg" mode as it will > switch between peripheral/host use cases. > > I've attached a log from the dwc2 driver from mainline Linux 5.2 when > being plugged into the macOS device for 30 seconds, then removed. The > mac in this case is a 2013 macbook pro. Any pointers in the right > direction would be greatly appreciated. > > Regards, > Jack. > I've been poking about with this some more and I've managed to bisect the issue down to the following commit 729cac693eecfebdb9e152eaddddd358ae2decb7 usb: dwc2: Change ISOC DDMA flow If I build before this commit everything works fine with a g_ether gadget device on mac. Unfortunately it's a rather large change which I can't just revert in master as it's got multiple dependant commits later. So, any advice on what could be causing this or how to help debug it would be much appreciated, as at the moment I've just forward ported the working 4.16 version of the driver over the 5.3-rc6 broken driver which isn't very sustainable in the long run. Regards, Jack. _______________________________________________ Linux-rockchip mailing list Linux-rockchip@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-rockchip
