From: Chen-Yu Tsai <wens@xxxxxxxx>
The devicetree binding lists the phy phy as optional. As such, the
driver should not bail out if it can't find a regulator. Instead it
should just skip the remaining regulator related code and continue
on normally.
Skip the remainder of phy_power_on() if a regulator supply isn't
available. This also gets rid of the bogus return code.
Fixes: 2e12f536635f ("net: stmmac: dwmac-rk: Use standard devicetree property for phy regulator")
Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
---
On a separate note, maybe we should add this file to the Rockchip
entry in MAINTAINERS?
---
drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index 4644b2aeeba1..e2e469c37a4d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -1194,10 +1194,8 @@ static int phy_power_on(struct rk_priv_data *bsp_priv, bool enable)
int ret;
struct device *dev = &bsp_priv->pdev->dev;
- if (!ldo) {
- dev_err(dev, "no regulator found\n");
- return -1;
- }
+ if (!ldo)
+ return 0;
if (enable) {
ret = regulator_enable(ldo);
--
2.20.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
