Tomohiro Mayama skrev den 2019-03-08 11:48:
Hello Dan,
On 2019/03/08 16:35, Dan Johansen wrote:
- gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
According to Robin's advice by reading the schematic, correct GPIO pin
assignment is RK_PA2, but GPIO_ACTIVE_LOW. This fixed the USB problem
for me.
Please see the following thread:
https://lists.infradead.org/pipermail/linux-rockchip/2019-March/023298.html
Also please see this patch:
https://lists.infradead.org/pipermail/linux-rockchip/2019-March/023300.html
Or won't your problem be fixed with this patch?
Regards,
Tomohiro
Ah, didn't see that one.
Yes it does.
Sorry. Please remove this patch submission.
--
Sincerely
Dan "Strit" Johansen
Project Lead on the Manjaro ARM project
https://www.manjaro.org
Catch me on:
Mastodon: @strit@mastodon.social
Matrix: @strit:matrix.org
Wire: @strit
Email: strit@xxxxxxxxxxx
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
