Yes, it's connected over the USB 3.0 port. I'll also try over USB 2.0
as soon as possible.
I first noticed the issue when my backup script froze the board, so
this is while reading from the eMMC.
My script that I invoke over ssh :
============
#!/usr/bin/env bash
IFS=$'\n\t'
set -euo pipefail
schedtool -B -n 8 "${BASHPID}"
ionice -c 3 -p "${BASHPID}"
EXCLUSION_FILE='/etc/tar-system-exclusion.txt'
TOTAL_SIZE="$(sudo du --bytes --summarize
--exclude-from="${EXCLUSION_FILE}" / | awk '{print $1}')"
sudo tar --create --file - --numeric-owner --acls --xattrs
--exclude-from="${EXCLUSION_FILE}" / | \
pv --progress --timer --eta --fineta --rate --average-rate
--bytes --force --size "${TOTAL_SIZE}" | \
lz4 -z
============
So it fails also around 2.8GB pushed and I get this panic on my serial
console in "__memcpy" this time though :
============
[12624.268933] SError Interrupt on CPU0, code 0xbf000002 -- SError
[12624.268940] CPU: 0 PID: 14170 Comm: kworker/u8:4 Tainted: G
O 5.2.8-1-ARCH #1
[12624.268942] Hardware name: Pine64 Rock64 (DT)
[12624.268944] Workqueue: btrfs-endio btrfs_endio_helper [btrfs]
[12624.268946] pstate: 20000005 (nzCv daif -PAN -UAO)
[12624.268948] pc : __memcpy+0x118/0x180
[12624.268950] lr : btrfs_decompress_buf2page+0x124/0x228 [btrfs]
[12624.268951] sp : ffff00001c28bb40
[12624.268952] x29: ffff00001c28bb40 x28: ffff8000f2a2b870
[12624.268955] x27: 0000000000001000 x26: ffff7e0000270200
[12624.268958] x25: 0000000000001000 x24: 000000000001f000
[12624.268961] x23: 0000000000000000 x22: 000000000001f000
[12624.268964] x21: ffff8000fde46040 x20: 0000000000140000
[12624.268967] x19: 0000000000001000 x18: ffff8000e830aef5
[12624.268970] x17: 0000000000000ad3 x16: 0000000000000003
[12624.268973] x15: 0000000000000002 x14: a8c37bfd9101e042
[12624.268976] x13: a9425bf552800021 x12: a94153f3f0000b62
[12624.268979] x11: f9400a80900011a4 x10: aa1603e3d63f0260
[12624.268982] x9 : 9101c04252800021 x8 : 910003fda9b97bfd
[12624.268985] x7 : d61f0080f9475c84 x6 : ffff800009c08390
[12624.268988] x5 : ffff800065005050 x4 : 0000000000000000
[12624.268990] x3 : 0000000000140000 x2 : 0000000000000c00
[12624.268993] x1 : ffff8000dac023d0 x0 : ffff800009c08000
[12624.268997] Kernel panic - not syncing: Asynchronous SError Interrupt
[12624.269000] CPU: 0 PID: 14170 Comm: kworker/u8:4 Tainted: G
O 5.2.8-1-ARCH #1
[12624.269001] Hardware name: Pine64 Rock64 (DT)
[12624.269003] Workqueue: btrfs-endio btrfs_endio_helper [btrfs]
[12624.269004] Call trace:
[12624.269006] dump_backtrace+0x0/0x168
[12624.269007] show_stack+0x24/0x30
[12624.269009] dump_stack+0xa8/0xcc
[12624.269010] panic+0x150/0x320
[12624.269011] __stack_chk_fail+0x0/0x28
[12624.269013] arm64_serror_panic+0x80/0x8c
[12624.269014] do_serror+0x11c/0x120
[12624.269016] el1_error+0x84/0xf8
[12624.269017] __memcpy+0x118/0x180
[12624.269018] zstd_decompress_bio+0xf8/0x250 [btrfs]
[12624.269020] end_compressed_bio_read+0x2ec/0x3f8 [btrfs]
[12624.269021] bio_endio.part.12+0x10c/0x1a8
[12624.269023] bio_endio+0x20/0x30
[12624.269024] end_workqueue_fn+0x4c/0x58 [btrfs]
[12624.269025] normal_work_helper+0x100/0x250 [btrfs]
[12624.269027] btrfs_endio_helper+0x20/0x30 [btrfs]
[12624.269029] process_one_work+0x1b4/0x408
[12624.269030] worker_thread+0x54/0x4b8
[12624.269031] kthread+0x12c/0x130
[12624.269033] ret_from_fork+0x10/0x1c
[12624.269068] SMP: stopping secondary CPUs
[12624.269069] Kernel Offset: disabled
[12624.269071] CPU features: 0x0002,20002000
[12624.269072] Memory Limit: none
============
Regards,
Philipp Richter
On Thu, 15 Aug 2019 at 15:59, Robin Murphy <robin.murphy@xxxxxxx> wrote:
>
> On 15/08/2019 13:21, Will Deacon wrote:
> > On Tue, Aug 13, 2019 at 03:36:00PM +0200, Philipp Richter wrote:
> >> this my first bug kernel bug report I think, so I hope I got the right
> >> contacts.
> >
> > Almost: I'm adding Heiko, Vicente and linux-rockchip to see if they have
> > a better idea since this sounds SoC-specific to me and eerily similar to
> > some kexec issues Vicente has been seeing recently.
>
> Hmm, I'm not so sure - we're talking different SoCs here, and the kexec
> problem does look to be specific to kexec (DMA left running after the
> first kernel shuts down). According to the SError dump, that's an AXI
> slave error on an external access, which is definitely not something I'd
> expect to see part-way through a copy_from_user() operation.
>
> From the boot log, it looks like the disks might be connected to the
> USB 3.0 port - it's worth noting that USB 3.0 on RK3328 isn't strictly
> supported by mainline yet, and Arch are carrying their own patch to
> enable it on Rock64. Is this still reproducible using USB 2.0 (or even
> SD/eMMC)?
>
> Robin.
>
> >
> > Will
> >
> > --->8
> >
> >> I've been getting "Kernel panic - not syncing: Asynchronous SError
> >> Interrupt" while transferring large files from and to my rock64 arm
> >> board.
> >> I am using btrfs as filesystem but an error seems to be triggered from
> >> "__arch_copy_from_user". It's a bit difficult for me right now to test
> >> with another filesystem but seems to be a troubleshooting option to
> >> keep in mind.
> >>
> >> A reproducible test is to write a big file with dd to disk using
> >> /dev/urandom for instance :
> >>
> >> sudo dd if=/dev/urandom of=/mnt/glassvault/out bs=1M count=8192 status=progress
> >> 2789212160 bytes (2.8 GB, 2.6 GiB) copied, 70 s, 39.8 MB/s
> >>
> >> So here the system panicked at around 2.8GB written of a 8GB file.
> >>
> >> Backing up the root filesystem or using the external storage panics
> >> the system after a while. Smaller file copies at around 1GB do not
> >> trigger it.
> >>
> >> The error output caught via serial console :
> >>
> >> [ 334.414128] SError Interrupt on CPU0, code 0xbf000002 -- SError
> >> [ 334.414136] CPU: 0 PID: 1774 Comm: dd Tainted: G O
> >> 5.2.8-1-ARCH #1
> >> [ 334.414137] Hardware name: Pine64 Rock64 (DT)
> >> [ 334.414139] pstate: 20000005 (nzCv daif -PAN -UAO)
> >> [ 334.414141] pc : __arch_copy_from_user+0x1bc/0x240
> >> [ 334.414142] lr : copyin+0x54/0x68
> >> [ 334.414144] sp : ffff000013523aa0
> >> [ 334.414145] x29: ffff000013523aa0 x28: 0000000000001000
> >> [ 334.414149] x27: ffff8000e112ec00 x26: 0000000000000005
> >> [ 334.414152] x25: ffff000013523d50 x24: 0000000000005000
> >> [ 334.414155] x23: 0000000000001000 x22: ffff800009c02000
> >> [ 334.414158] x21: ffff000013523d40 x20: 00000000000d5000
> >> [ 334.414161] x19: 0000000000000000 x18: 0000000000000000
> >> [ 334.414164] x17: 0000000000000000 x16: 0000000000000000
> >> [ 334.414167] x15: 0000000000000000 x14: 268451e20def8ac3
> >> [ 334.414170] x13: e9bb458ce1212efb x12: 9f52f204714b75c4
> >> [ 334.414173] x11: 0e6bc7b591c2d6e4 x10: 40d3c7db468453cb
> >> [ 334.414176] x9 : 0d91295116253226 x8 : d0355f82a419091a
> >> [ 334.414179] x7 : 911b47420a1c00a2 x6 : ffff800009c01150
> >> [ 334.414182] x5 : ffff800009c02000 x4 : 0000000000000000
> >> [ 334.414185] x3 : 0000ffffbdbc4000 x2 : 0000000000000e40
> >> [ 334.414188] x1 : 0000ffffbdbc4190 x0 : ffff800009c01000
> >> [ 334.414191] Kernel panic - not syncing: Asynchronous SError Interrupt
> >> [ 334.414194] CPU: 0 PID: 1774 Comm: dd Tainted: G O
> >> 5.2.8-1-ARCH #1
> >> [ 334.414195] Hardware name: Pine64 Rock64 (DT)
> >> [ 334.414197] Call trace:
> >> [ 334.414198] dump_backtrace+0x0/0x168
> >> [ 334.414199] show_stack+0x24/0x30
> >> [ 334.414200] dump_stack+0xa8/0xcc
> >> [ 334.414201] panic+0x150/0x320
> >> [ 334.414203] __stack_chk_fail+0x0/0x28
> >> [ 334.414204] arm64_serror_panic+0x80/0x8c
> >> [ 334.414206] do_serror+0x11c/0x120
> >> [ 334.414207] el1_error+0x84/0xf8
> >> [ 334.414208] __arch_copy_from_user+0x1bc/0x240
> >> [ 334.414210] iov_iter_copy_from_user_atomic+0xe4/0x390
> >> [ 334.414212] btrfs_copy_from_user+0x68/0x120 [btrfs]
> >> [ 334.414213] btrfs_buffered_write.isra.5+0x354/0x638 [btrfs]
> >> [ 334.414214] btrfs_file_write_iter+0x3b0/0x4e0 [btrfs]
> >> [ 334.414216] new_sync_write+0x110/0x198
> >> [ 334.414217] __vfs_write+0x74/0x90
> >> [ 334.414218] vfs_write+0xac/0x1b8
> >> [ 334.414219] ksys_write+0x74/0xf8
> >> [ 334.414221] __arm64_sys_write+0x24/0x30
> >> [ 334.414222] el0_svc_handler+0xa4/0x180
> >> [ 334.414223] el0_svc+0x8/0xc
> >> [ 334.414252] SMP: stopping secondary CPUs
> >> [ 334.414253] Kernel Offset: disabled
> >> [ 334.414254] CPU features: 0x0002,20002000
> >> [ 334.414256] Memory Limit: none
> >>
> >> My system specifications :
> >> This is happening on my rock64 board :
> >> - https://www.pine64.org/devices/single-board-computers/rock64/
> >> - https://wiki.pine64.org/index.php/ROCK64_Main_Page
> >>
> >> lscpu output :
> >> Architecture: aarch64
> >> CPU op-mode(s): 32-bit, 64-bit
> >> Byte Order: Little Endian
> >> CPU(s): 4
> >> On-line CPU(s) list: 0-3
> >> Thread(s) per core: 1
> >> Core(s) per socket: 4
> >> Socket(s): 1
> >> Vendor ID: ARM
> >> Model: 4
> >> Model name: Cortex-A53
> >> Stepping: r0p4
> >> CPU max MHz: 1296.0000
> >> CPU min MHz: 408.0000
> >> BogoMIPS: 48.00
> >> Vulnerability L1tf: Not affected
> >> Vulnerability Mds: Not affected
> >> Vulnerability Meltdown: Not affected
> >> Vulnerability Spec store bypass: Not affected
> >> Vulnerability Spectre v1: Mitigation; __user pointer sanitization
> >> Vulnerability Spectre v2: Not affected
> >> Flags: fp asimd evtstrm aes pmull sha1 sha2
> >> crc32 cpuid
> >>
> >> uname -a :
> >> Linux rock64 5.2.8-1-ARCH #1 SMP Fri Aug 9 23:49:35 UTC 2019 aarch64 GNU/Linux
> >>
> >> Using the archlinux arm image :
> >> https://archlinuxarm.org/platforms/armv8/rockchip/rock64
> >>
> >> Attached is the complete system log captured with the serial console.
> >>
> >> I wonder if this could be a hardware issue ?
> >>
> >> Thank you for your consideration.
> >>
> >> Best Regards,
> >> Philipp Richter
> >
> >> INFO: PSCI Power Domain Map:
> >> INFO: Domain Node : Level 2, parent_node -1, State ON (0x0)
> >> INFO: Domain Node : Level 1, parent_node 0, State ON (0x0)
> >> INFO: Domain Node : Level 0, parent_node 0, State ON (0x0)
> >> INFO: Domain Node : Level 0, parent_node 0, State ON (0x0)
> >> INFO: CPU Node : MPID 0x0, parent_node 1, State ON (0x0)
> >> INFO: CPU Node : MPID 0x1, parent_node 1, State ON (0x0)
> >> INFO: CPU Node : MPID 0x2, parent_node 1, State ON (0x0)
> >> INFO: CPU Node : MPID 0x3, parent_node 1, State ON (0x0)
> >> DDR version 1.16 20190528
> >> ID:0x805 N
> >> In
> >> SRX
> >> LPDDR3
> >> 333MHz
> >> Bus Width=32 Col=11 Bank=8 Row=15/15 CS=2 Die Bus-Width=32 Size=4096MB
> >> ddrconfig:7
> >> OUT
> >> Boot1 Release Time: May 13 2019 17:34:36, version: 2.50
> >> ChipType = 0x11, 316
> >> mmc2:cmd19,100
> >> SdmmcInit=2 0
> >> BootCapSize=2000
> >> UserCapSize=29820MB
> >> FwPartOffset=2000 , 2000
> >> SdmmcInit=0 NOT PRESENT
> >> StorageInit ok = 210392
> >> Raw SecureMode = 0
> >> SecureInit read PBA: 0x4
> >> SecureInit read PBA: 0x404
> >> SecureInit read PBA: 0x804
> >> SecureInit read PBA: 0xc04
> >> SecureInit read PBA: 0x1004
> >> SecureInit ret = 0, SecureMode = 0
> >> atags_set_bootdev: ret:(0)
> >> GPT 0x337a9f0 signature is wrong
> >> recovery gpt...
> >> GPT 0x337a9f0 signature is wrong
> >> recovery gpt fail!
> >> LoadTrust Addr:0x4000
> >> No find bl30.bin
> >> Load uboot, ReadLba = 2000
> >> Load OK, addr=0x200000, size=0x9a864
> >> RunBL31 0x10000
> >> NOTICE: BL31: v1.3(debug):0eba775
> >> NOTICE: BL31: Built : 12:11:32, Nov 23 2018
> >> NOTICE: BL31:Rockchip release version: v1.3
> >> INFO: ARM GICv2 driver initialized
> >> INFO: Using opteed sec cpu_context!
> >> INFO: boot cpu mask: 1
> >> INFO: plat_rockchip_pmu_init: pd status 0xe
> >> INFO: BL31: Initializing runtime services
> >> INFO: BL31: Initializing BL32
> >> INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-221-gda2bcfdc #137 Mon Jun 17 03:00:04 UTC 2019 aarch64)
> >>
> >> INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.4
> >>
> >> INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
> >> INFO: BL31: Preparing for EL3 exit to normal world
> >> INFO: Entry point address = 0x200000
> >> INFO: SPSR = 0x3c9
> >>
> >>
> >> U-Boot 2019.07-1 (Aug 10 2019 - 10:47:59 +0000) Arch Linux ARM
> >>
> >> Model: Rockchip RK3328 EVB
> >> DRAM: 4 GiB
> >> MMC: rksdmmc@ff500000: 1, rksdmmc@ff520000: 0
> >> Loading Environment from MMC... Card did not respond to voltage select!
> >> *** Warning - No block device, using default environment
> >>
> >> In: serial@ff130000
> >> Out: serial@ff130000
> >> Err: serial@ff130000
> >> Model: Rockchip RK3328 EVB
> >> Net:
> >> Warning: ethernet@ff540000 (eth0) using random MAC address - be:c7:d6:3e:93:7b
> >> eth0: ethernet@ff540000
> >> Hit any key to stop autoboot: 2 1 0
> >> switch to partitions #0, OK
> >> mmc0(part 0) is current device
> >> Scanning mmc 0:1...
> >> Found U-Boot script /boot.scr
> >> 1133 bytes read in 5 ms (220.7 KiB/s)
> >> ## Executing script at 00500000
> >> 26501632 bytes read in 628 ms (40.2 MiB/s)
> >> 49338 bytes read in 10 ms (4.7 MiB/s)
> >> 10033777 bytes read in 241 ms (39.7 MiB/s)
> >> ## Flattened Device Tree blob at 01f00000
> >> Booting using the fdt blob at 0x1f00000
> >> Loading Ramdisk to fc59b000, end fcf2ca71 ... OK
> >> Loading Device Tree to 00000000fc58b000, end 00000000fc59afff ... OK
> >>
> >> Starting kernel ...
> >>
> >> [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
> >> [ 0.000000] Linux version 5.2.8-1-ARCH (builduser@leming) (gcc version 8.3.0 (GCC)) #1 SMP Fri Aug 9 23:49:35 UTC 2019
> >> [ 0.000000] Machine model: Pine64 Rock64
> >> [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff130000 (options '')
> >> [ 0.000000] printk: bootconsole [uart8250] enabled
> >> [ 0.000000] printk: debug: ignoring loglevel setting.
> >> [ 0.000000] efi: Getting EFI parameters from FDT:
> >> [ 0.000000] efi: UEFI not found.
> >> [ 0.000000] cma: Reserved 64 MiB at 0x00000000f8400000
> >> [ 0.000000] On node 0 totalpages: 1043968
> >> [ 0.000000] DMA32 zone: 16312 pages used for memmap
> >> [ 0.000000] DMA32 zone: 0 pages reserved
> >> [ 0.000000] DMA32 zone: 1043968 pages, LIFO batch:63
> >> [ 0.000000] psci: probing for conduit method from DT.
> >> [ 0.000000] psci: PSCIv1.0 detected in firmware.
> >> [ 0.000000] psci: Using standard PSCI v0.2 function IDs
> >> [ 0.000000] psci: Trusted OS migration not required
> >> [ 0.000000] psci: SMC Calling Convention v1.0
> >> [ 0.000000] percpu: Embedded 31 pages/cpu s89496 r8192 d29288 u126976
> >> [ 0.000000] pcpu-alloc: s89496 r8192 d29288 u126976 alloc=31*4096
> >> [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
> >> [ 0.000000] Detected VIPT I-cache on CPU0
> >> [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1027656
> >> [ 0.000000] Kernel command line: console=ttyS2,1500000 ip=192.168.0.20::192.168.0.1:255.255.255.0::eth0:none cryptdevice=UUID=70b4d35b-a2e5-446d-b317-8ef53698beb6:cryptroot root=UUID=0250489f-2c3d-499e-9ff1-8f85451622e7 rootfstype=btrfs rootflags=subvol=@rootvol rw rootwait earlycon=uart8250,mmio32,0xff130000 fsck.mode=force md_mod.start_ro=1 debug ignore_loglevel log_buf_len=16M
> >> [ 0.000000] printk: log_buf_len: 16777216 bytes
> >> [ 0.000000] printk: early log buf free: 260348(99%)
> >> [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
> >> [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
> >> [ 0.000000] Memory: 3976792K/4175872K available (14588K kernel code, 2648K rwdata, 6688K rodata, 1920K init, 825K bss, 133544K reserved, 65536K cma-reserved)
> >> [ 0.000000] random: get_random_u64 called from cache_random_seq_create+0x88/0x158 with crng_init=0
> >> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> >> [ 0.000000] ftrace: allocating 50612 entries in 198 pages
> >> [ 0.000000] rcu: Hierarchical RCU implementation.
> >> [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
> >> [ 0.000000] Tasks RCU enabled.
> >> [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
> >> [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
> >> [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
> >> [ 0.000000] GIC: Using split EOI/Deactivate mode
> >> [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
> >> [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
> >> [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
> >> [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
> >> [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
> >> [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
> >> [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
> >> [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
> >> [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
> >> [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
> >> [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
> >> [ 0.002544] Console: colour dummy device 80x25
> >> [ 0.003022] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
> >> [ 0.004007] pid_max: default: 32768 minimum: 301
> >> [ 0.004710] LSM: Security Framework initializing
> >> [ 0.005168] Yama: becoming mindful.
> >> [ 0.005630] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
> >> [ 0.006300] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
> >> [ 0.007747] *** VALIDATE proc ***
> >> [ 0.008498] *** VALIDATE cgroup1 ***
> >> [ 0.008846] *** VALIDATE cgroup2 ***
> >> [ 0.010336] ASID allocator initialised with 32768 entries
> >> [ 0.010979] rcu: Hierarchical SRCU implementation.
> >> [ 0.016902] EFI services will not be available.
> >> [ 0.018071] smp: Bringing up secondary CPUs ...
> >> [ 0.019320] Detected VIPT I-cache on CPU1
> >> [ 0.019410] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
> >> [ 0.020336] Detected VIPT I-cache on CPU2
> >> [ 0.020412] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
> >> [ 0.021274] Detected VIPT I-cache on CPU3
> >> [ 0.021345] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
> >> [ 0.021488] smp: Brought up 1 node, 4 CPUs
> >> [ 0.024854] SMP: Total of 4 processors activated.
> >> [ 0.025305] CPU features: detected: 32-bit EL0 Support
> >> [ 0.025795] CPU features: detected: CRC32 instructions
> >> [ 0.026879] CPU: All CPU(s) started at EL2
> >> [ 0.027293] alternatives: patching kernel code
> >> [ 0.031870] devtmpfs: initialized
> >> [ 0.047224] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
> >> [ 0.048180] futex hash table entries: 1024 (order: 4, 65536 bytes)
> >> [ 0.052616] pinctrl core: initialized pinctrl subsystem
> >> [ 0.054646] DMI not present or invalid.
> >> [ 0.055662] NET: Registered protocol family 16
> >> [ 0.057142] audit: initializing netlink subsys (disabled)
> >> [ 0.057904] audit: type=2000 audit(0.050:1): state=initialized audit_enabled=0 res=1
> >> [ 0.059460] cpuidle: using governor ladder
> >> [ 0.059878] cpuidle: using governor menu
> >> [ 0.061077] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
> >> [ 0.064111] DMA: preallocated 256 KiB pool for atomic allocations
> >> [ 0.065680] Serial: AMBA PL011 UART driver
> >> [ 0.106380] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
> >> [ 0.107028] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
> >> [ 0.107664] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
> >> [ 0.108300] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
> >> [ 2.273837] cryptd: max_cpu_qlen set to 1000
> >> [ 2.291370] alg: No test for lzo-rle (lzo-rle-generic)
> >> [ 2.292198] alg: No test for lzo-rle (lzo-rle-scomp)
> >> [ 2.313901] ACPI: Interpreter disabled.
> >> [ 2.314870] sdmmc-regulator GPIO handle specifies active low - ignored
> >> [ 2.316511] vcc-host1-5v-regulator GPIO handle specifies active low - ignored
> >> [ 2.319734] vgaarb: loaded
> >> [ 2.321353] SCSI subsystem initialized
> >> [ 2.322016] libata version 3.00 loaded.
> >> [ 2.322896] usbcore: registered new interface driver usbfs
> >> [ 2.323483] usbcore: registered new interface driver hub
> >> [ 2.324116] usbcore: registered new device driver usb
> >> [ 2.325345] pps_core: LinuxPPS API ver. 1 registered
> >> [ 2.325818] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
> >> [ 2.326699] PTP clock support registered
> >> [ 2.327442] EDAC MC: Ver: 3.0.0
> >> [ 2.329247] Advanced Linux Sound Architecture Driver Initialized.
> >> [ 2.330598] NetLabel: Initializing
> >> [ 2.330926] NetLabel: domain hash size = 128
> >> [ 2.331372] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
> >> [ 2.332002] NetLabel: unlabeled traffic allowed by default
> >> [ 2.333538] clocksource: Switched to clocksource arch_sys_counter
> >> [ 3.536137] VFS: Disk quotas dquot_6.6.0
> >> [ 3.536616] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> >> [ 3.537405] *** VALIDATE hugetlbfs ***
> >> [ 3.538306] pnp: PnP ACPI: disabled
> >> [ 3.548776] NET: Registered protocol family 2
> >> [ 3.550155] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
> >> [ 3.550985] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
> >> [ 3.552071] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
> >> [ 3.553440] TCP: Hash tables configured (established 32768 bind 32768)
> >> [ 3.554654] UDP hash table entries: 2048 (order: 4, 65536 bytes)
> >> [ 3.555373] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
> >> [ 3.556426] NET: Registered protocol family 1
> >> [ 3.557771] RPC: Registered named UNIX socket transport module.
> >> [ 3.558342] RPC: Registered udp transport module.
> >> [ 3.558789] RPC: Registered tcp transport module.
> >> [ 3.559236] RPC: Registered tcp NFSv4.1 backchannel transport module.
> >> [ 3.559856] PCI: CLS 0 bytes, default 64
> >> [ 3.560479] Trying to unpack rootfs image as initramfs...
> >> [ 4.390556] Freeing initrd memory: 9796K
> >> [ 4.392765] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
> >> [ 4.394010] kvm [1]: IPA Size Limit: 40bits
> >> [ 4.396049] kvm [1]: vgic interrupt IRQ1
> >> [ 4.396592] kvm [1]: Hyp mode initialized successfully
> >> [ 5.273872] Initialise system trusted keyrings
> >> [ 5.274576] workingset: timestamp_bits=46 max_order=20 bucket_order=0
> >> [ 5.284456] zbud: loaded
> >> [ 5.288244] NFS: Registering the id_resolver key type
> >> [ 5.288758] Key type id_resolver registered
> >> [ 5.289160] Key type id_legacy registered
> >> [ 5.289554] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
> >> [ 5.290478] SGI XFS with ACLs, security attributes, no debug enabled
> >> [ 5.304919] NET: Registered protocol family 38
> >> [ 5.305369] Key type asymmetric registered
> >> [ 5.305760] Asymmetric key parser 'x509' registered
> >> [ 5.306314] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
> >> [ 5.307274] io scheduler mq-deadline registered
> >> [ 5.307709] io scheduler kyber registered
> >> [ 5.308386] io scheduler bfq registered
> >> [ 5.319920] gpio-syscon ff100000.syscon:grf-gpio: can't read the data register offset!
> >> [ 5.323397] IPMI message handler: version 39.2
> >> [ 5.333151] dma-pl330 ff1f0000.dmac: Loaded driver for PL330 DMAC-241330
> >> [ 5.333850] dma-pl330 ff1f0000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
> >> [ 5.341290] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> >> [ 5.345288] printk: console [ttyS2] disabled
> >> [ 5.345780] ff130000.serial: ttyS2 at MMIO 0xff130000 (irq = 14, base_baud = 1500000) is a 16550A
> >> [ 5.346693] printk: console [ttyS2] enabled
> >> [ 5.346693] printk: console [ttyS2] enabled
> >> [ 5.347462] printk: bootconsole [uart8250] disabled
> >> [ 5.347462] printk: bootconsole [uart8250] disabled
> >> [ 5.350235] msm_serial: driver initialized
> >> [ 5.362453] m25p80 spi0.0: gd25q128 (16384 Kbytes)
> >> [ 5.381313] libphy: Fixed MDIO Bus: probed
> >> [ 5.385044] dwc3 ff600000.dwc3: Failed to get clk 'ref': -2
> >> [ 5.388071] dwc2 ff580000.usb: ff580000.usb supply vusb_d not found, using dummy regulator
> >> [ 5.388903] dwc2 ff580000.usb: ff580000.usb supply vusb_a not found, using dummy regulator
> >> [ 5.404393] dwc2 ff580000.usb: DWC OTG Controller
> >> [ 5.404854] dwc2 ff580000.usb: new USB bus registered, assigned bus number 1
> >> [ 5.405525] dwc2 ff580000.usb: irq 33, io mem 0xff580000
> >> [ 5.406281] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
> >> [ 5.407012] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> >> [ 5.407651] usb usb1: Product: DWC OTG Controller
> >> [ 5.408070] usb usb1: Manufacturer: Linux 5.2.8-1-ARCH dwc2_hsotg
> >> [ 5.408608] usb usb1: SerialNumber: ff580000.usb
> >> [ 5.409766] hub 1-0:1.0: USB hub found
> >> [ 5.410144] hub 1-0:1.0: 1 port detected
> >> [ 5.412668] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> >> [ 5.413270] ehci-pci: EHCI PCI platform driver
> >> [ 5.413787] ehci-platform: EHCI generic platform driver
> >> [ 5.416868] ehci-platform ff5c0000.usb: EHCI Host Controller
> >> [ 5.417712] ehci-platform ff5c0000.usb: new USB bus registered, assigned bus number 2
> >> [ 5.419084] ehci-platform ff5c0000.usb: irq 34, io mem 0xff5c0000
> >> [ 5.443576] ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00
> >> [ 5.444442] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
> >> [ 5.445173] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> >> [ 5.445811] usb usb2: Product: EHCI Host Controller
> >> [ 5.446245] usb usb2: Manufacturer: Linux 5.2.8-1-ARCH ehci_hcd
> >> [ 5.446768] usb usb2: SerialNumber: ff5c0000.usb
> >> [ 5.447967] hub 2-0:1.0: USB hub found
> >> [ 5.448346] hub 2-0:1.0: 1 port detected
> >> [ 5.449303] ehci-orion: EHCI orion driver
> >> [ 5.449985] tegra-ehci: Tegra EHCI driver
> >> [ 5.450528] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> >> [ 5.451156] ohci-pci: OHCI PCI platform driver
> >> [ 5.451648] ohci-platform: OHCI generic platform driver
> >> [ 5.452515] ohci-platform ff5d0000.usb: Generic Platform OHCI controller
> >> [ 5.453442] ohci-platform ff5d0000.usb: new USB bus registered, assigned bus number 3
> >> [ 5.454760] ohci-platform ff5d0000.usb: irq 35, io mem 0xff5d0000
> >> [ 5.527889] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
> >> [ 5.528622] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> >> [ 5.529261] usb usb3: Product: Generic Platform OHCI controller
> >> [ 5.529785] usb usb3: Manufacturer: Linux 5.2.8-1-ARCH ohci_hcd
> >> [ 5.530307] usb usb3: SerialNumber: ff5d0000.usb
> >> [ 5.531477] hub 3-0:1.0: USB hub found
> >> [ 5.531857] hub 3-0:1.0: 1 port detected
> >> [ 5.532794] uhci_hcd: USB Universal Host Controller Interface driver
> >> [ 5.534443] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
> >> [ 5.535234] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
> >> [ 5.536870] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
> >> [ 5.537764] xhci-hcd xhci-hcd.0.auto: irq 169, io mem 0xff600000
> >> [ 5.538874] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
> >> [ 5.539606] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> >> [ 5.540244] usb usb4: Product: xHCI Host Controller
> >> [ 5.540679] usb usb4: Manufacturer: Linux 5.2.8-1-ARCH xhci-hcd
> >> [ 5.541202] usb usb4: SerialNumber: xhci-hcd.0.auto
> >> [ 5.542407] hub 4-0:1.0: USB hub found
> >> [ 5.542788] hub 4-0:1.0: 1 port detected
> >> [ 5.543652] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
> >> [ 5.544430] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
> >> [ 5.545124] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
> >> [ 5.545803] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
> >> [ 5.546676] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02
> >> [ 5.547406] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> >> [ 5.548045] usb usb5: Product: xHCI Host Controller
> >> [ 5.548479] usb usb5: Manufacturer: Linux 5.2.8-1-ARCH xhci-hcd
> >> [ 5.549002] usb usb5: SerialNumber: xhci-hcd.0.auto
> >> [ 5.550079] hub 5-0:1.0: USB hub found
> >> [ 5.550457] hub 5-0:1.0: 1 port detected
> >> [ 5.552054] usbcore: registered new interface driver uas
> >> [ 5.552740] usbcore: registered new interface driver usb-storage
> >> [ 5.553315] usbcore: registered new interface driver ums-alauda
> >> [ 5.554711] usbcore: registered new interface driver ums-cypress
> >> [ 5.555303] usbcore: registered new interface driver ums-datafab
> >> [ 5.555873] usbcore: registered new interface driver ums_eneub6250
> >> [ 5.556458] usbcore: registered new interface driver ums-freecom
> >> [ 5.557031] usbcore: registered new interface driver ums-isd200
> >> [ 5.557590] usbcore: registered new interface driver ums-jumpshot
> >> [ 5.558168] usbcore: registered new interface driver ums-karma
> >> [ 5.558723] usbcore: registered new interface driver ums-onetouch
> >> [ 5.559329] usbcore: registered new interface driver ums-realtek
> >> [ 5.559901] usbcore: registered new interface driver ums-sddr09
> >> [ 5.560465] usbcore: registered new interface driver ums-sddr55
> >> [ 5.561034] usbcore: registered new interface driver ums-usbat
> >> [ 5.561679] usbcore: registered new interface driver usbserial_generic
> >> [ 5.562286] usbserial: USB Serial support registered for generic
> >> [ 5.565340] mousedev: PS/2 mouse device common for all mice
> >> [ 5.570721] rk808 1-0018: chip id: 0x8050
> >> [ 5.578919] rk808-regulator rk808-regulator: there is no dvs0 gpio
> >> [ 5.579506] rk808-regulator rk808-regulator: there is no dvs1 gpio
> >> [ 5.580138] DCDC_REG1: supplied by vcc_sys
> >> [ 5.582764] vcc_host_5v: supplied by vcc_sys
> >> [ 5.583213] vcc_host1_5v: supplied by vcc_sys
> >> [ 5.583790] DCDC_REG2: supplied by vcc_sys
> >> [ 5.585461] DCDC_REG3: supplied by vcc_sys
> >> [ 5.586122] DCDC_REG4: supplied by vcc_sys
> >> [ 5.587749] LDO_REG1: supplied by vcc_io
> >> [ 5.591165] LDO_REG2: supplied by vcc_io
> >> [ 5.594577] LDO_REG3: supplied by vcc_sys
> >> [ 5.605089] device-mapper: uevent: version 1.0.3
> >> [ 5.606034] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@xxxxxxxxxx
> >> [ 5.611360] sdhci: Secure Digital Host Controller Interface driver
> >> [ 5.611911] sdhci: Copyright(c) Pierre Ossman
> >> [ 5.612853] Synopsys Designware Multimedia Card Interface Driver
> >> [ 5.614406] dwmmc_rockchip ff500000.dwmmc: IDMAC supports 32-bit address mode.
> >> [ 5.615304] dwmmc_rockchip ff500000.dwmmc: Using internal DMA controller.
> >> [ 5.615904] dwmmc_rockchip ff500000.dwmmc: Version ID is 270a
> >> [ 5.616484] dwmmc_rockchip ff500000.dwmmc: DW MMC controller at irq 30,32 bit host data width,256 deep fifo
> >> [ 5.617390] vcc_sd: supplied by vcc_io
> >> [ 5.630692] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
> >> [ 5.644352] dwmmc_rockchip ff520000.dwmmc: IDMAC supports 32-bit address mode.
> >> [ 5.645240] dwmmc_rockchip ff520000.dwmmc: Using internal DMA controller.
> >> [ 5.645844] dwmmc_rockchip ff520000.dwmmc: Version ID is 270a
> >> [ 5.646395] dwmmc_rockchip ff520000.dwmmc: DW MMC controller at irq 31,32 bit host data width,256 deep fifo
> >> [ 5.647984] mmc_host mmc1: card is non-removable.
> >> [ 5.661232] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
> >> [ 5.675543] sdhci-pltfm: SDHCI platform and OF driver helper
> >> [ 5.678483] ledtrig-cpu: registered to indicate activity on CPUs
> >> [ 5.679960] hidraw: raw HID events driver (C) Jiri Kosina
> >> [ 5.680611] usbcore: registered new interface driver usbhid
> >> [ 5.681121] usbhid: USB HID core driver
> >> [ 5.686302] drop_monitor: Initializing network drop monitor service
> >> [ 5.687106] Initializing XFRM netlink socket
> >> [ 5.688036] NET: Registered protocol family 10
> >> [ 5.722101] Segment Routing with IPv6
> >> [ 5.722539] mip6: Mobile IPv6
> >> [ 5.722809] NET: Registered protocol family 17
> >> [ 5.723440] Key type dns_resolver registered
> >> [ 5.724677] registered taskstats version 1
> >> [ 5.725045] Loading compiled-in X.509 certificates
> >> [ 5.725592] zswap: loaded using pool lzo/zbud
> >> [ 5.726195] Key type big_key registered
> >> [ 5.742637] Key type encrypted registered
> >> [ 5.756585] hctosys: unable to open rtc device (rtc0)
> >> [ 5.758243] vcc_sd: disabling
> >> [ 5.758524] ALSA device list:
> >> [ 5.758789] No soundcards found.
> >> [ 5.763938] random: fast init done
> >> [ 5.764394] Freeing unused kernel memory: 1920K
> >> [ 5.823591] Run /init as init process
> >> :: running early hook [udev]
> >> [ 5.859765] mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
> >> [ 5.866872] dwmmc_rockchip ff520000.dwmmc: Successfully tuned phase to 278
> >> [ 5.867852] mmc1: new HS200 MMC card at address 0001
> >> [ 5.870126] mmcblk1: mmc1:0001 SDW32G 29.1 GiB
> >> [ 5.871837] mmcblk1boot0: mmc1:0001 SDW32G partition 1 4.00 MiB
> >> [ 5.873811] mmcblk1boot1: mmc1:0001 SDW32G partition 2 4.00 MiB
> >> [ 5.874678] mmcblk1rpmb: mmc1:0001 SDW32G partition 3 4.00 MiB, chardev (235:0)
> >> [ 5.876990] mmcblk1: p1 p2
> >> Looking for configuration files in (higher priority first):
> >> /etc/tmpfiles.d
> >> /run/tmpfiles.d
> >> /usr/local/lib/tmpfiles.d
> >> /usr/lib/tmpfiles.d
> >> Reading config file "/run/tmpfiles.d/kmod.conf"ÔÇŽ
> >> Entry "/dev/btrfs-control" matches include prefix "/dev".
> >> Failed to determine whether '/dev/btrfs-control' is below autofs, ignoring: No such file or directory
> >> Running create action for entry c /dev/btrfs-control
> >> Created char device node "/dev/btrfs-control" 1:128.
> >> "/dev/btrfs-control" has correct mode 20600 already.
> >> [ 5.913716] usb 5-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
> >> Starting version 242.84-1-arch
> >> :: running hook [udev]
> >> :: Triggering uevents...
> >> [ 5.944464] usb 5-1: New USB device found, idVendor=152d, idProduct=0567, bcdDevice= 2.00
> >> [ 5.945191] usb 5-1: New USB device strings: Mfr=10, Product=11, SerialNumber=5
> >> [ 5.945830] usb 5-1: Product: USB to ATA/ATAPI Bridge
> >> [ 5.946271] usb 5-1: Manufacturer: JMicron
> >> [ 5.946631] usb 5-1: SerialNumber: 152D00539000
> >> [ 5.949430] usb-storage 5-1:1.0: USB Mass Storage device detected
> >> [ 5.952289] usb-storage 5-1:1.0: Quirks match for vid 152d pid 0567: 5000000
> >> [ 5.953139] scsi host0: usb-storage 5-1:1.0
> >> [ 6.322668] force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
> >> [ 6.322721] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock
> >> [ 6.324301] rk_gmac-dwmac ff540000.ethernet: clock input or output? (input).
> >> [ 6.324950] rk_gmac-dwmac ff540000.ethernet: TX delay(0x24).
> >> [ 6.325456] rk_gmac-dwmac ff540000.ethernet: RX delay(0x18).
> >> [ 6.325965] rk_gmac-dwmac ff540000.ethernet: integrated PHY? (no).
> >> [ 6.327146] rk_gmac-dwmac ff540000.ethernet: cannot get clock clk_mac_speed
> >> [ 6.327783] rk_gmac-dwmac ff540000.ethernet: clock input from PHY
> >> [ 6.333394] rk_gmac-dwmac ff540000.ethernet: init for RGMII
> >> [ 6.334445] rk_gmac-dwmac ff540000.ethernet: User ID: 0x10, Synopsys ID: 0x35
> >> [ 6.335103] rk_gmac-dwmac ff540000.ethernet: DWMAC1000
> >> [ 6.335573] rk_gmac-dwmac ff540000.ethernet: DMA HW capability register supported
> >> [ 6.336231] rk_gmac-dwmac ff540000.ethernet: RX Checksum Offload Engine supported
> >> [ 6.336887] rk_gmac-dwmac ff540000.ethernet: COE Type 2
> >> [ 6.337347] rk_gmac-dwmac ff540000.ethernet: Wake-Up On Lan supported
> >> [ 6.337960] rk_gmac-dwmac ff540000.ethernet: Normal descriptors
> >> [ 6.338486] rk_gmac-dwmac ff540000.ethernet: Ring mode enabled
> >> [ 6.339002] rk_gmac-dwmac ff540000.ethernet: Enable RX Mitigation via HW Watchdog Timer
> >> [ 6.458371] libphy: stmmac: probed
> >> [ 6.458699] mdio_bus stmmac-0:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
> >> [ 6.459527] mdio_bus stmmac-0:01: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
> >> :: running hook [netconf]
> >> [ 6.490371] Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
> >> [ 6.512069] rk_gmac-dwmac ff540000.ethernet eth0: No Safety Features support found
> >> [ 6.512758] rk_gmac-dwmac ff540000.ethernet eth0: PTP not supported by HW
> >> IP-Config: eth0: 192.168.0.20/255.255.255.0
> >> IP-Config: eth0: gw: 192.168.0.1 dns0: 0.0.0.0 dns1: 0.0.0.0
> >> :: running hook [tinyssh]
> >> Starting tinyssh
> >> :: running hook [encryptssh]
> >> [ 6.603123] random: cryptsetup: uninitialized urandom read (4 bytes read)
> >>
> >> A password is required to access the cryptroot volume:
> >> [ 6.624945] random: cryptsetup: uninitialized urandom read (4 bytes read)
> >> Enter passphrase for /dev/mmcblk1p2: [ 6.964242] scsi 0:0:0:0: Direct-Access SAMSUNG HD154UI 0520 PQ: 0 ANSI: 6
> >> [ 6.965390] scsi 0:0:0:1: Direct-Access Hitachi HDS721010CLA332 0520 PQ: 0 ANSI: 6
> >> [ 6.966471] scsi 0:0:0:2: Direct-Access SAMSUNG HD321KJ 0520 PQ: 0 ANSI: 6
> >> [ 6.967557] scsi 0:0:0:3: Direct-Access HGST HTS 545050A7E680 0520 PQ: 0 ANSI: 6
> >> [ 6.969619] sd 0:0:0:0: Attached scsi generic sg0 type 0
> >> [ 6.971662] sd 0:0:0:1: Attached scsi generic sg1 type 0
> >> [ 6.971955] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
> >> [ 6.975507] sd 0:0:0:0: [sda] Write Protect is off
> >> [ 6.975954] sd 0:0:0:0: [sda] Mode Sense: 67 00 10 08
> >> [ 6.977060] sd 0:0:0:2: Attached scsi generic sg2 type 0
> >> [ 6.977164] sd 0:0:0:1: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
> >> [ 6.978816] sd 0:0:0:0: [sda] Disabling FUA
> >> [ 6.979219] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> >> [ 6.981187] sd 0:0:0:1: [sdb] Write Protect is off
> >> [ 6.981639] sd 0:0:0:1: [sdb] Mode Sense: 67 00 10 08
> >> [ 6.982610] sd 0:0:0:2: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
> >> [ 6.982836] sd 0:0:0:3: Attached scsi generic sg3 type 0
> >> [ 6.984522] sd 0:0:0:1: [sdb] Disabling FUA
> >> [ 6.984923] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> >> [ 6.986197] sd 0:0:0:2: [sdc] Write Protect is off
> >> [ 6.986641] sd 0:0:0:2: [sdc] Mode Sense: 67 00 10 08
> >> [ 6.988359] sd 0:0:0:2: [sdc] Disabling FUA
> >> [ 6.988750] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> >> [ 6.989906] sd 0:0:0:3: [sdd] 976773168 512-byte logical blocks: (500 GB/466 GiB)
> >> [ 6.990982] sd 0:0:0:3: [sdd] Write Protect is off
> >> [ 6.991423] sd 0:0:0:3: [sdd] Mode Sense: 67 00 10 08
> >> [ 6.992280] sd 0:0:0:3: [sdd] Disabling FUA
> >> [ 6.992665] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> >> [ 8.892160] sdb: sdb1
> >> [ 8.893001] sda: sda1 sda2
> >> [ 8.900058] sd 0:0:0:1: [sdb] Attached SCSI disk
> >> [ 8.901265] sdc: sdc1
> >> [ 8.904861] sdd: sdd1 sdd2
> >> [ 8.909043] sd 0:0:0:0: [sda] Attached SCSI disk
> >> [ 8.910990] sd 0:0:0:2: [sdc] Attached SCSI disk
> >> [ 8.912434] sd 0:0:0:3: [sdd] Attached SCSI disk
> >> [ 11.684439] rk_gmac-dwmac ff540000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
> >> [ 11.685233] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> >> [ 18.069675] random: tinysshd: uninitialized urandom read (32 bytes read)
> >> [ 18.070281] random: tinysshd: uninitialized urandom read (32 bytes read)
> >> [ 18.070869] random: tinysshd: uninitialized urandom read (32 bytes read)
> >> tinysshd: Sp4K1mMd: info: connection from 192.168.0.101:49174 {main_tinysshd.c:106}
> >> tinysshd: Sp4K1mMd: info: auth: root: ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIHMqaXwhM3qPqU0hiTeYybGyMCocfqCT6GlLzgYSkkNG accepted {packet_auth.c:155}
> >> [ 38.083543] raid6: neonx8 gen() 1662 MB/s
> >> [ 38.253541] raid6: neonx8 xor() 1584 MB/s
> >> [ 38.423553] raid6: neonx4 gen() 1605 MB/s
> >> [ 38.593539] raid6: neonx4 xor() 1544 MB/s
> >> [ 38.763531] raid6: neonx2 gen() 1226 MB/s
> >> [ 38.933530] raid6: neonx2 xor() 1280 MB/s
> >> [ 39.103541] raid6: neonx1 gen() 819 MB/s
> >> [ 39.273544] raid6: neonx1 xor() 964 MB/s
> >> [ 39.443555] raid6: int64x8 gen() 1258 MB/s
> >> [ 39.613525] raid6: int64x8 xor() 822 MB/s
> >> [ 39.783558] raid6: int64x4 gen() 1061 MB/s
> >> [ 39.953523] raid6: int64x4 xor() 800 MB/s
> >> [ 40.123545] raid6: int64x2 gen() 732 MB/s
> >> [ 40.293536] raid6: int64x2 xor() 651 MB/s
> >> [ 40.463529] raid6: int64x1 gen() 476 MB/s
> >> [ 40.633545] raid6: int64x1 xor() 495 MB/s
> >> [ 40.633920] raid6: using algorithm neonx8 gen() 1662 MB/s
> >> [ 40.634390] raid6: .... xor() 1584 MB/s, rmw enabled
> >> [ 40.634825] raid6: using neon recovery algorithm
> >> [ 40.640476] xor: measuring software checksum speed
> >> [ 40.733529] 8regs : 2551.200 MB/sec
> >> [ 40.833521] 32regs : 2921.600 MB/sec
> >> [ 40.933517] arm64_neon: 2579.200 MB/sec
> >> [ 40.933883] xor: using function: 32regs (2921.600 MB/sec)
> >> [ 41.000114] Btrfs loaded, crc32c=crc32c-generic
> >> [ 41.004168] BTRFS: device label Root devid 1 transid 7598 /dev/dm-0
> >> Error reading passphrase from terminal.
> >> tinysshd: Sp4K1mMd: info: finished {main_tinysshd.c:287}
> >> :: performing fsck on '/dev/mapper/cryptroot'
> >> :: mounting '/dev/mapper/cryptroot' on real root
> >> [ 41.155941] BTRFS info (device dm-0): disk space caching is enabled
> >> [ 41.156513] BTRFS info (device dm-0): has skinny extents
> >> [ 41.168464] BTRFS info (device dm-0): enabling ssd optimizations
> >> :: running cleanup hook [tinyssh]
> >> :: running cleanup hook [netconf]
> >> [ 41.203478] rk_gmac-dwmac ff540000.ethernet eth0: Link is Down
> >> :: running cleanup hook [udev]
> >> [ 41.615555] systemd[1]: System time before build time, advancing clock.
> >> [ 41.624867] systemd[1]: systemd 242.84-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
> >> [ 41.626865] systemd[1]: No virtualization found in DMI
> >> [ 41.627321] systemd[1]: No virtualization found in CPUID
> >> [ 41.627819] systemd[1]: Virtualization XEN not found, /proc/xen does not exist
> >> [ 41.628668] systemd[1]: No virtualization found in /proc/device-tree/*
> >> [ 41.629421] systemd[1]: UML virtualization not found in /proc/cpuinfo.
> >> [ 41.630004] systemd[1]: This platform does not support /proc/sysinfo
> >> [ 41.630566] systemd[1]: Found VM virtualization none
> >> [ 41.631012] systemd[1]: Detected architecture arm64.
> >> [ 41.633743] systemd[1]: Mounting cgroup to /sys/fs/cgroup/hugetlb of type cgroup with options hugetlb.
> >>
> >> Welcome to Arch Linux ARM!
> >>
> >> [ 41.872853] systemd-gpt-auto-generator[657]: mmcblk1p2: Root device /dev/mmcblk1.
> >> [ 41.878670] systemd-bless-boot-generator[652]: Skipping generator, not an EFI boot.
> >> [ 41.882360] systemd-getty-generator[656]: Automatically adding serial getty for /dev/ttyS2.
> >> [ 41.889365] systemd-hibernate-resume-generator[658]: Not running in an initrd, quitting.
> >> [ 41.896703] systemd-fstab-generator[655]: Parsing /etc/fstab...
> >> [ 41.898123] systemd-fstab-generator[655]: Found entry what=/dev/disk/by-uuid/0250489f-2c3d-499e-9ff1-8f85451622e7 where=/ type=btrfs makefs=no growfs=no noauto=no nofail=no
> >> [ 41.900379] systemd-fstab-generator[655]: Found entry what=/dev/disk/by-uuid/0250489f-2c3d-499e-9ff1-8f85451622e7 where=/var type=btrfs makefs=no growfs=no noauto=no nofail=no
> >> [ 41.902542] systemd-fstab-generator[655]: Found entry what=/dev/disk/by-uuid/0250489f-2c3d-499e-9ff1-8f85451622e7 where=/home type=btrfs makefs=no growfs=no noauto=no nofail=no
> >> [ 41.904857] systemd-fstab-generator[655]: Found entry what=/dev/disk/by-uuid/01b27405-03cc-47e4-9171-aa221f71efaf where=/boot type=ext4 makefs=no growfs=no noauto=no nofail=no
> >> [ 41.911126] systemd-gpt-auto-generator[657]: No suitable partition table found, ignoring.
> >> [ 41.912724] systemd-fstab-generator[655]: Found entry what=proc where=/proc type=proc makefs=no growfs=no noauto=no nofail=no
> >> [ 41.915293] systemd-fstab-generator[655]: Found entry what=/dev/disk/by-uuid/0250489f-2c3d-499e-9ff1-8f85451622e7 where=/mnt/system type=btrfs makefs=no growfs=no noauto=no nofail=no
> >> [ 41.918223] systemd-fstab-generator[655]: Found entry what=/dev/disk/by-uuid/0250489f-2c3d-499e-9ff1-8f85451622e7 where=/mnt/btrfs type=btrfs makefs=no growfs=no noauto=yes nofail=no
> >> [ 41.921076] systemd-fstab-generator[655]: Found entry what=/dev/disk/by-uuid/ff2c0deb-7819-4b85-a6d3-5d6c1b1cfb99 where=/mnt/glassvault type=btrfs makefs=no growfs=no noauto=yes nofail=yes
> >> [ 41.924026] systemd-fstab-generator[655]: Found entry what=/mnt/glassvault where=/srv/nfs/glassvault type=none makefs=no growfs=no noauto=yes nofail=yes
> >> [ OK ] Started Dispatch Password ÔÇŽts to Console Directory Watch.
> >> [ OK ] Created slice system-serial\x2dgetty.slice.
> >> [ OK ] Set up automount ArbitraryÔÇŽs File System Automount Point.
> >> [ OK ] Listening on initctl Compatibility Named Pipe.
> >> [ OK ] Listening on Journal Socket (/dev/log).
> >> [ OK ] Listening on Process Core Dump Socket.
> >> [ OK ] Listening on LVM2 poll daemon socket.
> >> [ OK ] Created slice system-shadoÔÇŽocks\x2dlibev\x2dserver.slice.
> >> [ OK ] Listening on Network Service Netlink Socket.
> >> [ OK ] Listening on Device-mapper event daemon FIFOs.
> >> [ OK ] Listening on Journal Audit Socket.
> >> [ OK ] Listening on LVM2 metadata daemon socket.
> >> [ OK ] Listening on RPCbind Server Activation Socket.
> >> [ OK ] Reached target RPC Port Mapper.
> >> [ OK ] Created slice User and Session Slice.
> >> [ OK ] Reached target Slices.
> >> [ OK ] Reached target Remote File Systems.
> >> [ OK ] Started Forward Password RÔÇŽuests to Wall Directory Watch.
> >> [ OK ] Reached target Local Encrypted Volumes.
> >> [ OK ] Listening on Journal Socket.
> >> Starting Create list of reÔÇŽodes for the current kernel...
> >> Starting Journal Service...
> >> [ 42.851473] systemd[669]: Operating on architecture: arm
> >> [ 42.865047] systemd[669]: Operating on architecture: arm64
> >> [ 42.869802] systemd[669]: Operating on architecture: arm
> >> [ 42.870570] systemd[669]: Operating on architecture: arm64
> >> [ 42.871225] systemd[669]: Operating on architecture: arm
> >> [ 42.871892] systemd[669]: Operating on architecture: arm64
> >> [ 42.873964] systemd[669]: Failed to add filter for chmod: Numerical argument out of domain
> >> [ 42.874837] systemd[669]: Failed to add filter for mkdir: Numerical argument out of domain
> >> [ 42.875724] systemd[669]: Failed to add filter for mknod: Numerical argument out of domain
> >> [ 42.876602] systemd[669]: Failed to add filter for creat: Numerical argument out of domain
> >> [ 42.877493] systemd[669]: Failed to add filter for chmod: Numerical argument out of domain
> >> [ 42.878417] systemd[669]: Failed to add filter for mkdir: Numerical argument out of domain
> >> [ 42.879461] systemd[669]: Failed to add filter for mknod: Numerical argument out of domain
> >> Mounting POSIX Message [Queue File System... 42.880441] systemd[669]: Failed to add filter for creat: Numerical argument out of domain
> >>
> >> [ 42.881994] systemd[669]: Restricting namespace to: .
> >> [ 42.882560] systemd[669]: Operating on architecture: arm
> >> [ 42.883205] systemd[669]: Blocking cgroup.
> >> [ 42.883835] systemd[669]: Blocking ipc.
> >> [ 42.884441] systemd[669]: Blocking net.
> >> [ 42.885071] systemd[669]: Blocking mnt.
> >> [ 42.885718] systemd[669]: Blocking pid.
> >> [ 42.886470] systemd[669]: Blocking user.
> >> [ 42.887266] systemd[669]: Blocking uts.
> >> [ 42.888473] systemd[669]: Operating on architecture: arm64
> >> [ 42.889217] systemd[669]: Blocking cgroup.
> >> Mounting NFSD configuration filesystem...[ 42.889759] systemd[669]: Blocking ipc.
> >>
> >> [ 42.890695] systemd[669]: Blocking net.
> >> [ 42.891278] systemd[669]: Blocking mnt.
> >> [ 42.891883] systemd[669]: Blocking pid.
> >> [ 42.892515] systemd[669]: Blocking user.
> >> [ 42.893131] systemd[669]: Blocking uts.
> >> [ 42.894839] systemd[669]: Operating on architecture: arm
> >> Starting Remount Root and Kernel File Systems...
> >> Starting Monitoring of LVMÔÇŽmeventd or progress polling...
> >> Mounting Huge Pages File System...
> >> Mounting Kernel Debug File System...
> >> Starting Load Kernel Modules...
> >> [ OK ] Reached target Paths.
> >> [ OK ] Created slice system-getty.slice.
> >> [ OK ] Created slice system-systemd\x2dfsck.slice.
> >> [ 43.019560] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
> >> [ OK ] Reached target Swap.
> >> [ 43.061827] random: crng init done
> >> [ 43.062147] random: 5 urandom warning(s) missed due to ratelimiting
> >> Mounting Temporary Directory (/tmp)...
> >> [ OK ] Listening on udev Kernel Socket.
> >> [ OK ] Listening on udev Control Socket.
> >> Starting udev Coldplug all Devices...
> >> [ OK ] Started Create list of reqÔÇŽ nodes for the current kernel.
> >> [ OK ] Mounted POSIX Message Queue File System.
> >> [ OK ] Mounted NFSD configuration filesystem.
> >> [ OK ] Mounted Huge Pages File System.
> >> [ OK ] Mounted Kernel Debug File System.
> >> [ OK ] Mounted Temporary Directory (/tmp).
> >> [ OK ] Started LVM2 metadata daemon.
> >> [ OK ] Started Load Kernel Modules.
> >> [ 43.379747] BTRFS info (device dm-0): force zstd compression, level 3
> >> [ 43.380343] BTRFS info (device dm-0): enabling auto defrag
> >> [ 43.380831] BTRFS info (device dm-0): disk space caching is enabled
> >> [ OK ] Started Remount Root and Kernel File Systems.
> >> Starting Create Static Device Nodes in /dev...
> >> [ 43.456422] systemd[669]: Operating on architecture: arm64
> >> Mounting Kernel Configuration File System...
> >> Starting Apply Kernel Variables...
> >> [ OK ] Started Create Static Device Nodes in /dev.
> >> [ OK ] Mounted Kernel Configuration File System.
> >> Starting udev Kernel Device Manager...
> >> [ 43.560384] systemd[689]: Applying namespace mount on /run/systemd/unit-root/proc/sys/kernel/domainname
> >> [ 43.562423] systemd[689]: Successfully mounted /run/systemd/unit-root/proc/sys/kernel/domainname to /run/systemd/unit-root/proc/sys/kernel/domainname
> >> [ 43.564229] systemd[689]: Applying namespace mount on /run/systemd/unit-root/proc/sys/kernel/hostname
> >> [ 43.565938] systemd[689]: Successfully mounted /run/systemd/unit-root/proc/sys/kernel/hostname to /run/systemd/unit-root/proc/sys/kernel/hostname
> >> [ 43.569970] systemd[689]: Remounted /run/systemd/unit-root/proc/sys/kernel/domainname read-only.
> >> [ OK ] Started Apply Kernel Variables.
> >> [ 43.577304] systemd[689]: Remounted /run/systemd/unit-root/proc/sys/kernel/hostname read-only.
> >> [ 43.581074] systemd[689]: Operating on architecture: arm
> >> [ 43.594152] systemd[689]: Operating on architecture: arm64
> >> [ 43.598579] systemd[689]: Operating on architecture: arm
> >> [ 43.599557] systemd[689]: Operating on architecture: arm64
> >> [ 43.600430] systemd[689]: Operating on architecture: arm
> >> [ 43.601341] systemd[689]: Operating on architecture: arm64
> >> [ 43.603628] systemd[689]: Failed to add filter for chmod: Numerical argument out of domain
> >> [ 43.604547] systemd[689]: Failed to add filter for mkdir: Numerical argument out of domain
> >> [ 43.605441] systemd[689]: Failed to add filter for mknod: Numerical argument out of domain
> >> [ 43.606350] systemd[689]: Failed to add filter for creat: Numerical argument out of domain
> >> [ 43.607264] systemd[689]: Failed to add filter for chmod: Numerical argument out of domain
> >> [ 43.608214] systemd[689]: Failed to add filter for mkdir: Numerical argument out of domain
> >> [ 43.609135] systemd[689]: Failed to add filter for mknod: Numerical argument out of domain
> >> [ 43.610102] systemd[689]: Failed to add filter for creat: Numerical argument out of domain
> >> [ 43.611583] systemd[689]: Operating on architecture: arm
> >> [ 43.616441] systemd-journald[669]: Found cgroup2 on /sys/fs/cgroup/unified, unified hierarchy for systemd controller
> >> [ 43.620916] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 43.622158] systemd-journald[669]: Fixed min_use=1.0M max_use=197.9M max_size=24.7M min_size=512.0K keep_free=296.9M n_max_files=100
> >> [ 43.630406] systemd-journald[669]: Reserving 45048 entries in hash table.
> >> [ 43.632304] systemd-journald[669]: Vacuuming...
> >> [ 43.632849] systemd-journald[669]: Vacuuming done, freed 0B of archived journals from /run/log/journal/efd1758296a94bd09cc2ba3f0bb50427.
> >> [ 43.634519] systemd-journald[669]: Flushing /dev/kmsg...
> >> [ OK ] Started udev Coldplug all Devices.
> >> [ 43.739307] audit: type=1130 audit(1563803537.110:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> >> [ 43.791517] systemd-journald[669]: systemd-journald running as pid 669
> >> [ 43.793456] systemd-journald[669]: Sent READY=1 notification.
> >> [ OK ] Started Journal Service.
> >> [ 43.795061] systemd-journald[669]: Sent WATCHDOG=1 notification.
> >> [ 43.824274] audit: type=1130 audit(1563803537.200:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> >> [ 44.076504] systemd[689]: Operating on architecture: arm64
> >> [ OK ] Started udev Kernel Device Manager.
> >> [ 44.252653] audit: type=1130 audit(1563803537.620:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> >> [ 44.648398] dw_wdt: probe of ff1a0000.watchdog failed with error -2
> >> [ OK ] Found device /dev/ttyS2.
> >> [ 44.757081] rk3328-codec ff410000.codec: spk_depop_time use default value.
> >> [ 44.790519] lima ff300000.gpu: bus rate = 163840000
> >> [ 44.790972] lima ff300000.gpu: mod rate = 163840000
> >> [ 44.794707] lima ff300000.gpu: gp - mali450 version major 0 minor 0
> >> [ 44.795567] lima ff300000.gpu: pp0 - mali450 version major 0 minor 0
> >> [ 44.796240] lima ff300000.gpu: pp1 - mali450 version major 0 minor 0
> >> [ 44.796902] lima ff300000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus
> >> [ 44.797632] lima ff300000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus
> >> [ 44.809584] [drm] Initialized lima 1.0.0 20190217 for ff300000.gpu on minor 0
> >> [ 44.825769] Registered IR keymap rc-empty
> >> [ 44.826345] rc rc0: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0
> >> [ 44.827194] input: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0/input0
> >> [ 44.834847] rc rc0: lirc_dev: driver gpio_ir_recv registered at minor = 0, raw IR receiver, no transmitter
> >> [ 44.854765] rk808-rtc rk808-rtc: registered as rtc0
> >> [ 44.890633] rockchip-vop ff370000.vop: Adding to iommu group 0
> >> [ 44.928197] rockchip-drm display-subsystem: bound ff370000.vop (ops vop_component_ops [rockchipdrm])
> >> [ 44.929475] dwhdmi-rockchip ff3c0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (inno_dw_hdmi_phy2)
> >> [ 44.947455] dwhdmi-rockchip ff3c0000.hdmi: registered DesignWare HDMI I2C bus driver
> >> [ 44.949808] rockchip-drm display-subsystem: bound ff3c0000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm])
> >> [ 44.950657] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> >> [ 44.951237] [drm] No driver support for vblank timestamp query.
> >> [ 44.951834] [drm] Cannot find any crtc or sizes
> >> [ 44.973910] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 1
> >> [ OK ] Found device /dev/disk/by-ÔÇŽ5-03cc-47e4-9171-aa221f71efaf.
> >> [ 45.224367] BTRFS info (device dm-0): device fsid 0250489f-2c3d-499e-9ff1-8f85451622e7 devid 1 moved old:/dev/mapper/cryptroot new:/dev/dm-0
> >> [ 45.228575] BTRFS info (device dm-0): device fsid 0250489f-2c3d-499e-9ff1-8f85451622e7 devid 1 moved old:/dev/dm-0 new:/dev/mapper/cryptroot
> >> [ 45.353655] Registered IR keymap rc-cec
> >> [ 45.354235] rc rc1: dw_hdmi as /devices/platform/ff3c0000.hdmi/rc/rc1
> >> [ 45.355089] input: dw_hdmi as /devices/platform/ff3c0000.hdmi/rc/rc1/input1
> >> [ OK ] Found device /dev/disk/by-ÔÇŽf-2c3d-499e-9ff1-8f85451622e7.
> >> [ 46.003691] [drm] Cannot find any crtc or sizes
> >> [ 46.396387] md127: detected capacity change from 0 to 1106309687296
> >> [ 46.398853] md126: detected capacity change from 0 to 1106444953600
> >> [ 46.476618] async_tx: api initialized (async)
> >> [ 46.506798] md/raid:md125: not clean -- starting background reconstruction
> >> [ 46.507534] md/raid:md125: device md127 operational as raid disk 1
> >> [ 46.508087] md/raid:md125: device md126 operational as raid disk 2
> >> [ 46.508628] md/raid:md125: device sda1 operational as raid disk 0
> >> [ 46.511127] md/raid:md125: raid level 5 active with 3 out of 3 devices, algorithm 2
> >> [ 46.544057] md125: detected capacity change from 0 to 2212348559360
> >> Starting MD array monitor...
> >> [ OK ] Started MD array monitor.
> >> [ 46.704045] audit: type=1130 audit(1563803540.080:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=mdmonitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> >> [ OK ] Started Monitoring of LVM2ÔÇŽ dmeventd or progress polling.
> >> [ 46.883882] audit: type=1130 audit(1563803540.260:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> >> [ OK ] Reached target Local File Systems (Pre).
> >> Starting File System CheckÔÇŽ03cc-47e4-9171-aa221f71efaf...
> >> Mounting /home...
> >> Mounting /var...
> >> Mounting /mnt/system...
> >> [ OK ] Mounted /home.
> >> [ OK ] Mounted /var.
> >> [ OK ] Mounted /mnt/system.
> >> Starting Load/Save Random Seed...
> >> Starting Flush Journal to Persistent Storage...
> >> [ OK ] Started Load/Save Random Seed.
> >> [ 47.060046] audit: type=1130 audit(1563803540.430:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> >> Boot: fsck 0.0% complete... [ OK ] Started File System Check ÔÇŽ5-03cc-47e4-9171-aa221f71efaf.
> >> [ 47.194761] audit: type=1130 audit(1563803540.570:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-01b27405\x2d03cc\x2d47e4\x2d9171\x2daa221f71efaf comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> >> Mounting /boot...
> >> [ 47.225323] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
> >> [ OK ] Mounted /boot.
> >> [ OK ] Reached target Local File Systems.
> >> [ OK ] Started Flush Journal to Persistent Storage.
> >> [ 47.553975] audit: type=1130 audit(1563803540.930:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> >> Starting Create Volatile Files and Directories...
> >> [ OK ] Started Create Volatile Files and Directories.
> >> [ 47.684031] audit: type=1130 audit(1563803541.060:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> >> Starting Update UTMP about System Boot/Shutdown...
> >> Starting Network Time Synchronization...
> >> Starting Entropy Harvesting Daemon...
> >> Mounting RPC Pipe File System...
> >> [ OK ] Mounted RPC Pipe File System.
> >> [ 47.759423] audit: type=1127 audit(1563803541.130:11): pid=773 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
> >> [ OK ] Started Entropy Harvesting Daemon.
> >> [ OK ] Reached target rpc_pipefs.target.
> >> Starting NFSv4 ID-name mapping service...
> >> Starting NFSv4 Client Tracking Daemon...
> >> [ OK ] Started Update UTMP about System Boot/Shutdown.
> >> [ OK ] Started NFSv4 Client Tracking Daemon.
> >> [ OK ] Started NFSv4 ID-name mapping service.
> >> [ OK ] Started Network Time Synchronization.
> >> [ OK ] Reached target System Time Set.
> >> [ OK ] Reached target System Time Synchronized.
> >> [ OK ] Reached target System Initialization.
> >> [ 48.644114] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ OK ] Started Daily Cleanup of Snapper Sna[pshots.
> >> 48.645438] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 48.646953] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ OK ] Started ;39mRun root.hints monthly.
> >> 48.648291] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 48.649862] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ OK ] Started Discard unused blocks once a[ week.
> >> 48.651343] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 48.652826] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ OK ] Listening on D-Bus System Message Bus Socket.
> >> [ 48.654536] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 48.656126] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 48.657259] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ OK ] Reached target Sockets.
> >> [ OK ] Started Monthly Btrfs scrub on /mnt/glassvault.
> >> [ OK ] Started Daily man-db regeneration.
> >> [ OK ] Started Daily Cleanup of Temporary Directories.
> >> [ OK ] Started Daily reset of dnsmasq/pi-hole query log.
> >> [ OK ] Started Daily renewal of acme.sh certificates.
> >> [ OK ] Reached target Basic System.
> >> [ OK ] Started irqbalance daemon.
> >> [ 48.894079] kauditd_printk_skb: 6 callbacks suppressed
> >> [ 48.894086] audit: type=1130 audit(1565697884.849:18): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=irqbalance comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> >> [ OK ] Started Manage swap spacesÔÇŽn zram, files and partitions..
> >> [ 48.933669] audit: type=1130 audit(1565697884.879:19): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-swap comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> >> [ OK ] Started D-Bus System Message Bus.
> >> [ 48.955601] audit: type=1130 audit(1565697884.909:20): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> >> [ OK ] Started DNSCrypt-proxy client.
> >> [ 48.969499] audit: type=1130 audit(1565697884.919:21): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dnscrypt-proxy comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> >> Starting Netfilter Tables...
> >> Starting GSSAPI Proxy Daemon...
> >> Starting Self Monitoring aÔÇŽg Technology (SMART) Daemon...
> >> Starting IPv4 Packet Filtering Framework...
> >> Starting Login Service...
> >> [ OK ] Started Timeline of Snapper Snapshots.
> >> Starting USBGuard daemon...
> >> [ OK ] Started Pi-hole FTLDNS engine.
> >> [ 49.072725] audit: type=1130 audit(1565697885.019:22): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=pihole-FTL comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> >> [ OK ] Started Run periodic raid volume scrub.
> >> [ OK ] Started Daily rotation of log files.
> >> Starting Restore system tiÔÇŽoot and save it on shutdown...
> >> [ OK ] Started Daily verification of password and group files.
> >> [ OK ] Started Weekly ad-serving domains gathering.
> >> [ 49.209107] bpfilter: Loaded bpfilter_umh pid 801
> >> Started bpfilter
> >> [ OK ] Started Netfilter Tables.
> >> [ 49.223993] audit: type=1130 audit(1565697885.179:23): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=nftables comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> >> [ 49.257418] audit: type=1325 audit(1565697885.209:24): table=mangle family=2 entries=0
> >> [ 49.298437] audit: type=1325 audit(1565697885.249:25): table=mangle family=2 entries=6
> >> [ 49.324654] audit: type=1325 audit(1565697885.269:26): table=nat family=2 entries=0
> >> [ 49.365322] audit: type=1325 audit(1565697885.319:27): table=nat family=2 entries=5
> >> [ OK ] Started Restore system timÔÇŽ boot and save it on shutdown.
> >> [ OK ] Started Periodically saves system time to file timer.
> >> [ OK ] Reached target Timers.
> >> [ OK ] Started IPv4 Packet Filtering Framework.
> >> [ OK ] Reached target Network (Pre).
> >> Starting Network Service...
> >> [ OK ] Started SSHGuard - blocks brute-force login attempts.
> >> [ OK ] Started GSSAPI Proxy Daemon.
> >> [ OK ] Started USBGuard daemon.
> >> [ OK ] Started Login Service.
> >> [ 50.956002] wireguard: loading out-of-tree module taints kernel.
> >> [ 50.961332] wireguard: WireGuard 0.0.20190702 loaded. See www.wireguard.com for information.
> >> [ 50.962091] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@xxxxxxxxx>. All Rights Reserved.
> >> [ OK ] Started Network Service.
> >> [ OK ] Reached target Network.
> >> Starting The PHP FastCGI Process Manager...
> >> [ OK ] Started DNS-over-HTTPS Server.
> >> Starting Sets the firmwareÔÇŽr sslh transparent proxying...
> >> [ OK ] Started SSL/SSH multiplexer (fork mode).
> >> Starting Permit User Sessions...
> >> [ OK ] Started Unbound DNS Resolver.
> >> [ OK ] Reached target Host and Network Name Lookups.
> >> [ OK ] Started OpenSSH Daemon.
> >> Starting Wait for Network to be Configured...
> >> [ 51.172034] Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
> >> [ 51.195007] rk_gmac-dwmac ff540000.ethernet eth0: No Safety Features support found
> >> [ 51.195723] rk_gmac-dwmac ff540000.ethernet eth0: PTP not supported by HW
> >> [ OK ] Started Permit User Sessions.
> >> [ OK ] Started Serial Getty on ttyS2.
> >> [ OK ] Started Getty on tty1.
> >> [ OK ] Reached target Login Prompts.
> >> [ OK ] Started Sets the firmware ÔÇŽfor sslh transparent proxying.
> >> [ OK ] Started The PHP FastCGI Process Manager.
> >> [ 53.826878] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 53.828624] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 53.831031] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 53.832480] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 53.833946] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 53.835131] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 53.837031] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 53.838244] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 54.055881] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 54.324463] rk_gmac-dwmac ff540000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
> >> [ 54.325250] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> >> [ 54.327569] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ OK ] Started Self Monitoring anÔÇŽing Technology (SMART) Daemon.
> >> [ 55.385487] kauditd_printk_skb: 21 callbacks suppressed
> >> [ 55.385497] audit: type=1130 audit(1565697891.339:49): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=smartd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> >>
> >> Arch Linux 5.2.8-1-ARCH (ttyS2)
> >>
> >> rock64 login: [ 59.214222] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 62.238720] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 62.240107] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 62.241259] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 62.243201] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 62.244906] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 66.989756] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 67.454244] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 67.455689] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 67.457426] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 67.459017] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 67.460459] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 67.463440] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 67.465034] audit: type=1130 audit(1565697903.419:50): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-networkd-wait-online comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> >> [ 67.465737] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 67.468255] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 67.469798] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 67.494954] audit: type=1130 audit(1565697903.449:51): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=shadowsocks-libev-server@main comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> >> [ 67.520464] audit: type=1130 audit(1565697903.469:52): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=badvpn-udpgw comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> >> [ 67.786151] audit: type=1130 audit(1565697903.739:53): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rpcbind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> >> [ 67.902328] audit: type=1130 audit(1565697903.849:54): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=nfs-mountd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> >> [ 67.936170] audit: type=1130 audit(1565697903.889:55): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rpc-statd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> >> [ 68.641217] audit: type=1006 audit(1565697976.049:56): pid=946 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1
> >> [ 68.840807] audit: type=1130 audit(1565697976.249:57): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> >> [ 68.893470] audit: type=1006 audit(1565697976.299:58): pid=949 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
> >> [ 69.213378] audit: type=1130 audit(1565697976.619:59): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> >> [ 69.243287] NFSD: Using UMH upcall client tracking operations.
> >> [ 69.244017] NFSD: starting 90-second grace period (net f0000041)
> >> [ 72.241052] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 72.244099] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 72.245874] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 72.249252] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 72.251023] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 73.124974] kauditd_printk_skb: 3 callbacks suppressed
> >> [ 73.124983] audit: type=1130 audit(1565697980.539:63): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=nginx comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> >> [ 73.130861] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 73.133510] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 73.135056] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 73.136624] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 73.138327] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 82.242506] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 82.244715] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 82.246099] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 82.248165] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 82.249761] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 83.139292] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 83.634981] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 83.636562] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 83.644113] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 83.645561] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 92.243757] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 92.245343] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 92.246621] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 92.248712] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 92.250083] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 92.305936] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 92.307542] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 96.087683] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 96.089672] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 99.992391] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 99.995134] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 100.009809] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 100.011427] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 100.012874] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 100.014582] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 100.016023] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 100.017451] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 100.018886] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 100.020424] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 110.453073] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 112.246751] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 112.248255] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 112.249536] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 112.251623] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 112.253373] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 116.789143] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 116.791332] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 122.247692] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 122.249305] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 122.250627] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 122.252881] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 122.254487] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 127.256164] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 132.134131] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 132.135900] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 132.138645] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 132.140302] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 132.248524] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 132.250121] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 132.251465] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 132.254046] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 132.255420] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 137.266628] systemd-journald[669]: Sent WATCHDOG=1 notification.
> >> [ 137.268381] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 137.270070] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 137.271736] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 140.616211] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 140.618868] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 142.251132] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 142.252867] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 142.254303] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 142.256375] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 145.655478] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 145.657011] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 145.658262] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 145.659373] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 145.660429] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 145.661573] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 147.393139] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 149.843874] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 149.845490] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 149.857427] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 152.252266] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 152.253929] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 152.255227] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 152.257368] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 152.258795] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 152.260030] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 162.254157] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 162.255578] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 162.256922] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 162.259009] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 162.260384] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 164.241031] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 164.243650] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 164.256993] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 164.258552] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 164.259879] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 172.260227] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 172.262468] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 172.264983] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 172.268760] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 172.270888] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 177.744261] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 181.790879] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 181.793721] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 181.795819] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 181.797566] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 181.799157] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 181.800686] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 181.802208] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 181.804161] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 181.805651] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 181.853499] BTRFS: device label glassvault devid 1 transid 158 /dev/dm-1
> >> [ 182.016417] BTRFS info (device dm-1): use zstd compression, level 3
> >> [ 182.016994] BTRFS info (device dm-1): enabling auto defrag
> >> [ 182.017480] BTRFS info (device dm-1): using free space tree
> >> [ 182.017969] BTRFS info (device dm-1): has skinny extents
> >> [ 185.985238] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 185.987454] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 192.259719] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 192.261283] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 192.262602] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 192.264842] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 192.266418] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 198.948770] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 198.950491] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 198.962249] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 198.965024] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 198.969102] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 202.262706] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 202.264077] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 202.265752] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 202.267791] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 202.269168] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 207.655433] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 207.657304] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 207.664183] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 207.665886] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 207.667129] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 207.668288] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 212.264137] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 212.265989] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 212.267535] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 212.269706] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 222.266006] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 222.267594] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 222.269130] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 222.271555] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 222.273052] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 232.266074] systemd-journald[669]: Sent WATCHDOG=1 notification.
> >> [ 232.268564] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 232.270050] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 232.271344] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 232.272535] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 232.274607] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 232.276380] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 232.638382] md: resync of RAID array md125
> >> [ 232.645139] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 242.269536] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 242.271637] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 242.273298] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 242.276092] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 242.277783] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 243.626042] md: md125: resync done.
> >> [ 243.635245] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 252.269905] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 252.271477] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 252.272766] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 252.274817] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 252.276595] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 252.277902] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 262.271635] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 262.273186] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 262.274456] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 262.276997] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 262.278409] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 264.246527] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 264.248184] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 264.259992] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 264.262711] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 269.676730] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 269.679255] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 269.681054] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 269.682571] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 269.683821] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 269.684918] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 269.689241] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 272.273301] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 272.275635] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 272.277416] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 276.946561] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 282.273887] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 282.275672] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 282.277647] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 282.281113] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 282.282677] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 292.275830] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 292.278158] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 292.279919] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 292.282723] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 292.284537] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 292.493843] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 292.497018] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 292.510796] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 292.512356] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 292.514254] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 297.744948] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 302.276998] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 302.278991] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 302.280379] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 302.282442] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 302.284106] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 302.285505] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 312.280762] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 312.283020] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 312.284825] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 312.288147] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 312.294199] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 320.099648] systemd-journald[669]: Sent WATCHDOG=1 notification.
> >> [ 320.101231] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 320.103946] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 320.105550] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 322.311538] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 322.314402] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 322.316094] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 322.320394] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 322.322165] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 331.675338] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 331.677478] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 331.683766] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 331.685182] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 331.686379] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 331.688101] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 332.306306] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 332.308445] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 332.310098] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 332.316364] systemd-journald[669]: Journal effective settings seal=no compress=yes compress_threshold_bytes=512B
> >> [ 334.414128] SError Interrupt on CPU0, code 0xbf000002 -- SError
> >> [ 334.414136] CPU: 0 PID: 1774 Comm: dd Tainted: G O 5.2.8-1-ARCH #1
> >> [ 334.414137] Hardware name: Pine64 Rock64 (DT)
> >> [ 334.414139] pstate: 20000005 (nzCv daif -PAN -UAO)
> >> [ 334.414141] pc : __arch_copy_from_user+0x1bc/0x240
> >> [ 334.414142] lr : copyin+0x54/0x68
> >> [ 334.414144] sp : ffff000013523aa0
> >> [ 334.414145] x29: ffff000013523aa0 x28: 0000000000001000
> >> [ 334.414149] x27: ffff8000e112ec00 x26: 0000000000000005
> >> [ 334.414152] x25: ffff000013523d50 x24: 0000000000005000
> >> [ 334.414155] x23: 0000000000001000 x22: ffff800009c02000
> >> [ 334.414158] x21: ffff000013523d40 x20: 00000000000d5000
> >> [ 334.414161] x19: 0000000000000000 x18: 0000000000000000
> >> [ 334.414164] x17: 0000000000000000 x16: 0000000000000000
> >> [ 334.414167] x15: 0000000000000000 x14: 268451e20def8ac3
> >> [ 334.414170] x13: e9bb458ce1212efb x12: 9f52f204714b75c4
> >> [ 334.414173] x11: 0e6bc7b591c2d6e4 x10: 40d3c7db468453cb
> >> [ 334.414176] x9 : 0d91295116253226 x8 : d0355f82a419091a
> >> [ 334.414179] x7 : 911b47420a1c00a2 x6 : ffff800009c01150
> >> [ 334.414182] x5 : ffff800009c02000 x4 : 0000000000000000
> >> [ 334.414185] x3 : 0000ffffbdbc4000 x2 : 0000000000000e40
> >> [ 334.414188] x1 : 0000ffffbdbc4190 x0 : ffff800009c01000
> >> [ 334.414191] Kernel panic - not syncing: Asynchronous SError Interrupt
> >> [ 334.414194] CPU: 0 PID: 1774 Comm: dd Tainted: G O 5.2.8-1-ARCH #1
> >> [ 334.414195] Hardware name: Pine64 Rock64 (DT)
> >> [ 334.414197] Call trace:
> >> [ 334.414198] dump_backtrace+0x0/0x168
> >> [ 334.414199] show_stack+0x24/0x30
> >> [ 334.414200] dump_stack+0xa8/0xcc
> >> [ 334.414201] panic+0x150/0x320
> >> [ 334.414203] __stack_chk_fail+0x0/0x28
> >> [ 334.414204] arm64_serror_panic+0x80/0x8c
> >> [ 334.414206] do_serror+0x11c/0x120
> >> [ 334.414207] el1_error+0x84/0xf8
> >> [ 334.414208] __arch_copy_from_user+0x1bc/0x240
> >> [ 334.414210] iov_iter_copy_from_user_atomic+0xe4/0x390
> >> [ 334.414212] btrfs_copy_from_user+0x68/0x120 [btrfs]
> >> [ 334.414213] btrfs_buffered_write.isra.5+0x354/0x638 [btrfs]
> >> [ 334.414214] btrfs_file_write_iter+0x3b0/0x4e0 [btrfs]
> >> [ 334.414216] new_sync_write+0x110/0x198
> >> [ 334.414217] __vfs_write+0x74/0x90
> >> [ 334.414218] vfs_write+0xac/0x1b8
> >> [ 334.414219] ksys_write+0x74/0xf8
> >> [ 334.414221] __arm64_sys_write+0x24/0x30
> >> [ 334.414222] el0_svc_handler+0xa4/0x180
> >> [ 334.414223] el0_svc+0x8/0xc
> >> [ 334.414252] SMP: stopping secondary CPUs
> >> [ 334.414253] Kernel Offset: disabled
> >> [ 334.414254] CPU features: 0x0002,20002000
> >> [ 334.414256] Memory Limit: none
> >
> >
> > _______________________________________________
> > Linux-rockchip mailing list
> > Linux-rockchip@xxxxxxxxxxxxxxxxxxx
> > http://lists.infradead.org/mailman/listinfo/linux-rockchip
> >
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
