Am Donnerstag, 25. Juli 2019, 18:26:41 CEST schrieb Matthias Kaehlcke:
> Also known as AOpen Chromebox Mini.
>
> Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> ---
> Changes in v3:
> - patch added to the series
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/rk3288-veyron-fievel.dts | 299 +++++++++++++++++++++
> 2 files changed, 300 insertions(+)
> create mode 100644 arch/arm/boot/dts/rk3288-veyron-fievel.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 9159fa2cea90..9fd1e075c624 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -919,6 +919,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
> rk3288-tinker.dtb \
> rk3288-tinker-s.dtb \
> rk3288-veyron-brain.dtb \
> + rk3288-veyron-fievel.dtb \
> rk3288-veyron-jaq.dtb \
> rk3288-veyron-jerry.dtb \
> rk3288-veyron-mickey.dtb \
> diff --git a/arch/arm/boot/dts/rk3288-veyron-fievel.dts b/arch/arm/boot/dts/rk3288-veyron-fievel.dts
> new file mode 100644
> index 000000000000..a9716fc3f50a
> --- /dev/null
> +++ b/arch/arm/boot/dts/rk3288-veyron-fievel.dts
> @@ -0,0 +1,299 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Veyron Fievel Rev 0+ board device tree source
> + *
> + * Copyright 2016 Google, Inc
> + */
> +
> +/dts-v1/;
> +#include "rk3288-veyron.dtsi"
> +#include "rk3288-veyron-analog-audio.dtsi"
> +
> +/ {
> + model = "Google Fievel";
> + compatible = "google,veyron-fievel-rev8", "google,veyron-fievel-rev7",
> + "google,veyron-fievel-rev6", "google,veyron-fievel-rev5",
> + "google,veyron-fievel-rev4", "google,veyron-fievel-rev3",
> + "google,veyron-fievel-rev2", "google,veyron-fievel-rev1",
> + "google,veyron-fievel-rev0", "google,veyron-fievel",
> + "google,veyron", "rockchip,rk3288";
> +
> + /delete-node/ bt-activity;
> +
> + ext_gmac: external-gmac-clock {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <125000000>;
> + clock-output-names = "ext_gmac";
> + };
> +
> + /*
> + * vcc33_pmuio and vcc33_io is sourced directly from vcc33_sys,
> + * enabled by vcc_18
> + */
> + vcc33_io: vcc33-io {
> + compatible = "regulator-fixed";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc33_io";
> + };
> +
> + vcc5_host1: vcc5-host1-regulator {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio5 RK_PC1 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hub_usb1_pwr_en>;
> + regulator-name = "vcc5_host1";
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vcc5_host2: vcc5-host2-regulator {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio5 RK_PC2 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hub_usb2_pwr_en>;
> + regulator-name = "vcc5_host2";
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vcc5v_otg: vcc5v-otg-regulator {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&usb_otg_pwr_en>;
> + regulator-name = "vcc5_otg";
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +};
> +
> +&gmac {
> + status = "okay";
> +
> + assigned-clocks = <&cru SCLK_MAC>;
> + assigned-clock-parents = <&ext_gmac>;
> + clock_in_out = "input";
> + phy-handle = <ðphy>;
> + phy-mode = "rgmii";
> + phy-supply = <&vcc33_lan>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
> + resets = <&cru SRST_MAC>;
> + reset-names = "stmmaceth";
> + rx_delay = <0x10>;
> + tx_delay = <0x30>;
> +
> + /* Reset for the RTL8211 PHY which requires a 10-ms reset pulse (low)
> + * with a 30ms settling time. */
> + snps,reset-gpio = <&gpio4 RK_PB0 0>;
> + snps,reset-active-low;
> + snps,reset-delays-us = <0 10000 30000>;
> + wakeup-source;
> +
> + mdio0 {
> + compatible = "snps,dwmac-mdio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy: ethernet-phy@1 {
> + reg = <1>;
> + };
> + };
> +};
> +
> +&rk808 {
> + dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>,
> + <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
> +
> + vcc6-supply = <&vcc33_sys>;
> + vcc10-supply = <&vcc33_sys>;
> + vcc11-supply = <&vcc_5v>;
> + vcc12-supply = <&vcc33_sys>;
> +
> + regulators {
> + /delete-node/ LDO_REG1;
> +
> + /* According to the schematic, vcc18_lcdt is for
> + * HDMI_AVDD_1V8
> + */
> + vcc18_lcdt: LDO_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vdd18_lcdt";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + /* This is not a pwren anymore, but the real power supply,
> + * vdd10_lcd for HDMI_AVDD_1V0
> + */
> + vdd10_lcd: LDO_REG7 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-name = "vdd10_lcd";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1000000>;
> + };
> +
I've dropped this unnecessary newline
> + };
and applied the result for 5.4
Thanks
Heiko
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
