Hi Rob, Thanks a lot for the review! > -----Original Message----- > From: Rob Herring <robh@xxxxxxxxxx> > Sent: Tuesday, July 23, 2019 3:24 AM > To: Manish Narani <MNARANI@xxxxxxxxxx> > Cc: ulf.hansson@xxxxxxxxxx; mark.rutland@xxxxxxx; heiko@xxxxxxxxx; Michal > Simek <michals@xxxxxxxxxx>; adrian.hunter@xxxxxxxxx; > christoph.muellner@xxxxxxxxxxxxxxxxxxxxx; philipp.tomsich@theobroma- > systems.com; viresh.kumar@xxxxxxxxxx; scott.branden@xxxxxxxxxxxx; > ayaka@xxxxxxxxxxx; kernel@xxxxxxxx; tony.xie@xxxxxxxxxxxxxx; Rajan Vaja > <RAJANV@xxxxxxxxxx>; Jolly Shah <JOLLYS@xxxxxxxxxx>; Nava kishore Manne > <navam@xxxxxxxxxx>; mdf@xxxxxxxxxx; olof@xxxxxxxxx; linux- > mmc@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux- > kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux- > rockchip@xxxxxxxxxxxxxxxxxxx > Subject: Re: [PATCH v2 01/11] dt-bindings: mmc: arasan: Update > documentation for SD Card Clock > > On Mon, Jul 01, 2019 at 10:59:41AM +0530, Manish Narani wrote: > > The clock handling is to be updated in the Arasan SDHCI. As the > > 'devm_clk_register' is deprecated in the clock framework, this needs to > > specify one more clock named 'clk_sdcard' to get the clock in the driver > > via 'devm_clk_get()'. This clock represents the clock from controller to > > the card. > > Please explain why in terms of the binding, not some driver calls. Okay. > > > > Signed-off-by: Manish Narani <manish.narani@xxxxxxxxxx> > > --- > > Documentation/devicetree/bindings/mmc/arasan,sdhci.txt | 15 ++++++++++- > ---- > > 1 file changed, 10 insertions(+), 5 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt > b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt > > index 1edbb04..15c6397 100644 > > --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt > > +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt > > @@ -23,6 +23,10 @@ Required Properties: > > - reg: From mmc bindings: Register location and length. > > - clocks: From clock bindings: Handles to clock inputs. > > - clock-names: From clock bindings: Tuple including "clk_xin" and "clk_ahb" > > + Apart from these two there is one more optional clock which > > + is "clk_sdcard". This clock represents output clock from > > + controller and card. This must be specified when #clock-cells > > + is specified. > > - interrupts: Interrupt specifier > > > > Required Properties for "arasan,sdhci-5.1": > > @@ -36,9 +40,10 @@ Optional Properties: > > - clock-output-names: If specified, this will be the name of the card clock > > which will be exposed by this device. Required if #clock-cells is > > specified. > > - - #clock-cells: If specified this should be the value <0>. With this property > > - in place we will export a clock representing the Card Clock. This clock > > - is expected to be consumed by our PHY. You must also specify > > + - #clock-cells: If specified this should be the value <0>. With this > > + property in place we will export one clock representing the Card > > + Clock. This clock is expected to be consumed by our PHY. You must also > > + specify > > specify what? I think this line was already there, I missed to correct it, Will update in v3. > > The 3rd clock input I assume? This statement means any existing users > with 2 clock inputs and #clock-cells are in error now. Is that correct? Yes, this is correct. So far there was only one vendor using '#clock-cells' which is Rockchip. I have sent DT patch (02/11) for that also. Here this is needed as earlier implementation isn't correct as suggested by Uffe. (https://lkml.org/lkml/2019/6/20/486) . Thanks, Manish _______________________________________________ Linux-rockchip mailing list Linux-rockchip@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-rockchip
