Re: [PATCH v3 26/57] ram: rk3399: Configure PHY_898, PHY_919 for lpddr4

[Kever Yang <kever.yang@xxxxxxxxxxxxxx>]

On 2019/7/16 下午7:57, Jagan Teki wrote:
> PHY_898, PHY_919 would require to configure PHY LP4 boot
> pll control and ca for lpddr4.
>
> So, configure the same in pctl_cfg for LPDDR4.
>
> Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
> Signed-off-by: YouMin Chen <cym@xxxxxxxxxxxxxx>

Reviewed-by: Kever Yang <Kever.yang@xxxxxxxxxxxxxx>

Thanks,
 - Kever
> ---
>   drivers/ram/rockchip/sdram_rk3399.c | 5 +++++
>   1 file changed, 5 insertions(+)
>
> diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c
> index beb4f6de54..7625506458 100644
> --- a/drivers/ram/rockchip/sdram_rk3399.c
> +++ b/drivers/ram/rockchip/sdram_rk3399.c
> @@ -574,6 +574,11 @@ static int pctl_cfg(struct dram_info *dram, const struct chan_info *chan,
>   	writel(params->phy_regs.denali_phy[911], &denali_phy[911]);
>   	writel(params->phy_regs.denali_phy[912], &denali_phy[912]);
>   
> +	if (IS_ENABLED(CONFIG_RAM_RK3399_LPDDR4)) {
> +		writel(params->phy_regs.denali_phy[898], &denali_phy[898]);
> +		writel(params->phy_regs.denali_phy[919], &denali_phy[919]);
> +	}
> +
>   	dram->pwrup_srefresh_exit[channel] = readl(&denali_ctl[68]) &
>   					     PWRUP_SREFRESH_EXIT;
>   	clrbits_le32(&denali_ctl[68], PWRUP_SREFRESH_EXIT);



_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip