Am Mittwoch, 19. Juni 2019, 20:34:25 CEST schrieb Douglas Anderson:
> This is the other half of the hacky solution from commit f497ab6b4bb8
> ("ARM: dts: rockchip: Configure BT_HOST_WAKE as wake-up signal on
> veyron"). Specifically the LPM driver that the Broadcom Bluetooth
> expects to have (but is missing in mainline) has two halves of the
> equation: BT_HOST_WAKE and BT_DEV_WAKE. The BT_HOST_WAKE (which was
> handled in the previous commit) is the one that lets the Bluetooth
> wake the system up. The BT_DEV_WAKE (this patch) tells the Bluetooth
> that it's OK to go into a low power mode. That means we were burning
> a bit of extra power in S3 without this patch. Measurements are a bit
> noisy, but it appears to be a few mA worth of difference.
>
> NOTE: Though these pins don't do much on systems with Marvell
> Bluetooth, downstream kernels set it on all veyron boards so we'll do
> the same.
>
> Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
applied for 5.3
Thanks
Heiko
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
