Re: [PATCH] ARM: dts: rockchip: add ethernet phy node for tinker board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

Current linux-next on my environment, 'ifconfig eth0 up' does not
work correctly with following message...

-----
root@linaro-alip:~# ifconfig eth0 up
[ 105.028916] rk_gmac-dwmac ff290000.ethernet eth0: stmmac_open: Cannot attach to PHY (error: -19)
SIOCSIFFLAGS: No such device
-----

I checked drivers/net/ethernet/stmicro/stmmac/stmmac_main.c and found
stmmac_init_phy() is going to fail if ethernet device node does not
have following property:
  - phy-handle
  - phy
  - phy-device

I salvaged old version of linux-next kernel (5.2.0-rc1-20190523),
network device of my Tinker Board worked correctly if use it.

I have not bisect commit of root cause yet... Is it better to bisect
and find problem instead of sending this patch?

Best Regards,
---
Katsuhiro Suzuki


On 2019/06/22 17:33, Heiko Stuebner wrote:
Hi,

Am Freitag, 21. Juni 2019, 20:00:17 CEST schrieb Katsuhiro Suzuki:
This patch adds missing mdio and ethernet PHY nodes for rk3328 ASUS
tinker board.

Signed-off-by: Katsuhiro Suzuki <katsuhiro@xxxxxxxxxxxxx>

just for my understanding, which problem does this solve?
Normally the gmac can establish connections just fine on
the rk3288 by probing the phy in the automatic way.

And I also don't see any additional properties like phy
interrupt line below.


Thanks
Heiko

---
  arch/arm/boot/dts/rk3288-tinker.dtsi | 12 ++++++++++++
  1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
index 293576869546..3190817e8d5d 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
@@ -117,6 +117,7 @@
  	assigned-clocks = <&cru SCLK_MAC>;
  	assigned-clock-parents = <&ext_gmac>;
  	clock_in_out = "input";
+	phy-handle = <&phy0>;
  	phy-mode = "rgmii";
  	phy-supply = <&vcc33_lan>;
  	pinctrl-names = "default";
@@ -127,6 +128,17 @@
  	tx_delay = <0x30>;
  	rx_delay = <0x10>;
  	status = "ok";
+
+	mdio0 {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
  };
&gpu {








_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux