Re: [PATCH v5 0/5] brcmfmac: sdio: Deal better w/ transmission errors related to idle

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 17 Jun 2019 at 19:57, Douglas Anderson <dianders@xxxxxxxxxxxx> wrote:
>
> This series attempts to deal better with the expected transmission
> errors related to the idle states (handled by the Always-On-Subsystem
> or AOS) on the SDIO-based WiFi on rk3288-veyron-minnie,
> rk3288-veyron-speedy, and rk3288-veyron-mickey.
>
> Some details about those errors can be found in
> <https://crbug.com/960222>, but to summarize it here: if we try to
> send the wakeup command to the WiFi card at the same time it has
> decided to wake up itself then it will behave badly on the SDIO bus.
> This can cause timeouts or CRC errors.
>
> When I tested on 4.19 and 4.20 these CRC errors can be seen to cause
> re-tuning.  Since I am currently developing on 4.19 this was the
> original problem I attempted to solve.
>
> On mainline it turns out that you don't see the retuning errors but
> you see tons of spam about timeouts trying to wakeup from sleep.  I
> tracked down the commit that was causing that and have partially
> reverted it here.  I have no real knowledge about Broadcom WiFi, but
> the commit that was causing problems sounds (from the descriptioin) to
> be a hack commit penalizing all Broadcom WiFi users because of a bug
> in a Cypress SD controller.  I will let others comment if this is
> truly the case and, if so, what the right solution should be.
>
> For v3 of this series I have added 2 patches to the end of the series
> to address errors that would show up on systems with these same SDIO
> WiFi cards when used on controllers that do periodic retuning.  These
> systems need an extra fix to prevent the retuning from happening when
> the card is asleep.
>
> I believe v5 of this series is all ready to go assuming Kalle Valo is
> good with it.  I've added after-the-cut notes to patches awaiting his
> Ack and have added other tags collected so far.
>
> Changes in v5:
> - Add missing sdio_retune_crc_enable() in comments (Ulf).
> - /s/reneable/re-enable (Ulf).
> - Remove leftover prototypes: mmc_expect_errors_begin() / end() (Ulf).
> - Rewording of "sleep command" in commit message (Arend).
>
> Changes in v4:
> - Moved to SDIO API only (Adrian, Ulf).
> - Renamed to make it less generic, now retune_crc_disable (Ulf).
> - Function header makes it clear host must be claimed (Ulf).
> - No more WARN_ON (Ulf).
> - Adjust to API rename (Adrian, Ulf).
> - Moved retune hold/release to SDIO API (Adrian).
> - Adjust to API rename (Adrian).
>
> Changes in v3:
> - Took out the spinlock since I believe this is all in one context.
> - Expect errors for all of brcmf_sdio_kso_control() (Adrian).
> - ("mmc: core: Export mmc_retune_hold_now() mmc_retune_release()") new for v3.
> - ("brcmfmac: sdio: Don't tune while the card is off") new for v3.
>
> Changes in v2:
> - A full revert, not just a partial one (Arend).  ...with explicit Cc.
> - Updated commit message to clarify based on discussion of v1.
>
> Douglas Anderson (5):
>   Revert "brcmfmac: disable command decode in sdio_aos"
>   mmc: core: API to temporarily disable retuning for SDIO CRC errors
>   brcmfmac: sdio: Disable auto-tuning around commands expected to fail
>   mmc: core: Add sdio_retune_hold_now() and sdio_retune_release()
>   brcmfmac: sdio: Don't tune while the card is off
>
>  drivers/mmc/core/core.c                       |  5 +-
>  drivers/mmc/core/sdio_io.c                    | 77 +++++++++++++++++++
>  .../broadcom/brcm80211/brcmfmac/sdio.c        | 17 ++--
>  include/linux/mmc/host.h                      |  1 +
>  include/linux/mmc/sdio_func.h                 |  6 ++
>  5 files changed, 99 insertions(+), 7 deletions(-)
>
> --
> 2.22.0.410.gd8fdbe21b5-goog
>

Applied for fixes, thanks!

Some minor changes:
1) Dropped the a few "commit notes", that was more related to version
and practical information about the series.
2) Dropped fixes tags for patch 2->5, but instead put a stable tag
targeted for v4.18+.

Awaiting an ack from Kalle before sending the PR to Linus.

Kalle, perhaps you prefer to pick patch 1, as it could go separate.
Then please tell - and/or if there is anything else you want me to
change.

Kind regards
Uffe

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux