Hi, From: kernelci.org bot <bot@xxxxxxxxxxxx> Date: Tue, May 14, 2019 at 9:06 AM To: <tomeu.vizoso@xxxxxxxxxxxxx>, <guillaume.tucker@xxxxxxxxxxxxx>, <mgalka@xxxxxxxxxxxxx>, <broonie@xxxxxxxxxx>, <matthew.hart@xxxxxxxxxx>, <khilman@xxxxxxxxxxxx>, <enric.balletbo@xxxxxxxxxxxxx>, Elaine Zhang, Eduardo Valentin, Daniel Lezcano Cc: Heiko Stuebner, <linux-pm@xxxxxxxxxxxxxxx>, <linux-kernel@xxxxxxxxxxxxxxx>, <linux-rockchip@xxxxxxxxxxxxxxxxxxx>, Zhang Rui, <linux-arm-kernel@xxxxxxxxxxxxxxxxxxx> > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > * This automated bisection report was sent to you on the basis * > * that you may be involved with the breaking commit it has * > * found. No manual investigation has been done to verify it, * > * and the root cause of the problem may be somewhere else. * > * Hope this helps! * > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > > next/master boot bisection: next-20190514 on rk3288-veyron-jaq > > Summary: > Start: 0a13f187b16a Add linux-next specific files for 20190514 > Details: https://kernelci.org/boot/id/5cda7f2259b514876d7a3628 > Plain log: https://storage.kernelci.org//next/master/next-20190514/arm/multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y/gcc-8/lab-collabora/boot-rk3288-veyron-jaq.txt > HTML log: https://storage.kernelci.org//next/master/next-20190514/arm/multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y/gcc-8/lab-collabora/boot-rk3288-veyron-jaq.html > Result: 691d4947face thermal: rockchip: fix up the tsadc pinctrl setting error > > Checks: > revert: PASS > verify: PASS > > Parameters: > Tree: next > URL: git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git > Branch: master > Target: rk3288-veyron-jaq > CPU arch: arm > Lab: lab-collabora > Compiler: gcc-8 > Config: multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y > Test suite: boot > > Breaking commit found: > > ------------------------------------------------------------------------------- > commit 691d4947faceb8bd841900049e07c81c95ca4b0d > Author: Elaine Zhang <zhangqing@xxxxxxxxxxxxxx> > Date: Tue Apr 30 18:09:44 2019 +0800 > > thermal: rockchip: fix up the tsadc pinctrl setting error > > Explicitly use the pinctrl to set/unset the right mode > instead of relying on the pinctrl init mode. > And it requires setting the tshut polarity before select pinctrl. > > When the temperature sensor mode is set to 0, it will automatically > reset the board via the Clock-Reset-Unit (CRU) if the over temperature > threshold is reached. However, when the pinctrl initializes, it does a > transition to "otp_out" which may lead the SoC restart all the time. > > "otp_out" IO may be connected to the RESET circuit on the hardware. > If the IO is in the wrong state, it will trigger RESET. > (similar to the effect of pressing the RESET button) > which will cause the soc to restart all the time. > > Signed-off-by: Elaine Zhang <zhangqing@xxxxxxxxxxxxxx> > Reviewed-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx> > Signed-off-by: Eduardo Valentin <edubezval@xxxxxxxxx> I can confirm that the above commit breaks my jerry, though I haven't dug into the details. :( Is anyone fixing? For now I'm just booting with the revert. -Doug _______________________________________________ Linux-rockchip mailing list Linux-rockchip@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-rockchip
