Hi, On Sat, 2019-04-27 at 17:18 +0530, Jagan Teki wrote: > diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS > index ae43805a6a..5917abb9c1 100644 > --- a/board/rockchip/evb_rk3399/MAINTAINERS > +++ b/board/rockchip/evb_rk3399/MAINTAINERS > @@ -6,6 +6,12 @@ F: include/configs/evb_rk3399.h > F: configs/evb-rk3399_defconfig > F: configs/firefly-rk3399_defconfig > > +NANOPC-T4 > +M: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> > +S: Maintained > +F: configs/nanopic-t4-rk3399_defconfig > +F: arch/arm/dts/rk3399-nanopic-t4-u-boot.dtsi > + Mhh, I feel like each new board that you are introducing should have its own board directory -- this board is definitely not a rk3399 evb made by rockchip, but another board. I have already patches to split that for the firefly-rk3399, but I cannot really test them outside of building. > NANOPI-M4 > M: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> > S: Maintained > diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig > new file mode 100644 > index 0000000000..7ba4f85485 > --- /dev/null > +++ b/configs/nanopc-t4-rk3399_defconfig > @@ -0,0 +1,58 @@ Also I don't see which TARGET is selected here, is there a fallback on the RK3399 EVB for the rk3399 platform? Cheers, Paul > +CONFIG_ARM=y > +CONFIG_ARCH_ROCKCHIP=y > +CONFIG_SYS_TEXT_BASE=0x00200000 > +CONFIG_SPL_LIBCOMMON_SUPPORT=y > +CONFIG_SPL_LIBGENERIC_SUPPORT=y > +CONFIG_SYS_MALLOC_F_LEN=0x4000 > +CONFIG_ROCKCHIP_RK3399=y > +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000 > +CONFIG_DEBUG_UART_BASE=0xFF1A0000 > +CONFIG_DEBUG_UART_CLOCK=24000000 > +CONFIG_SPL_STACK_R_ADDR=0x80000 > +CONFIG_DEBUG_UART=y > +CONFIG_NR_DRAM_BANKS=1 > +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopc-t4.dtb" > +# CONFIG_DISPLAY_CPUINFO is not set > +CONFIG_DISPLAY_BOARDINFO_LATE=y > +CONFIG_SPL_STACK_R=y > +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000 > +CONFIG_CMD_BOOTZ=y > +CONFIG_CMD_GPT=y > +CONFIG_CMD_MMC=y > +CONFIG_CMD_SF=y > +CONFIG_CMD_USB=y > +# CONFIG_CMD_SETEXPR is not set > +CONFIG_CMD_TIME=y > +CONFIG_SPL_OF_CONTROL=y > +CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopc-t4" > +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" > +CONFIG_ENV_IS_IN_MMC=y > +CONFIG_ROCKCHIP_GPIO=y > +CONFIG_SYS_I2C_ROCKCHIP=y > +CONFIG_MMC_DW=y > +CONFIG_MMC_DW_ROCKCHIP=y > +CONFIG_MMC_SDHCI=y > +CONFIG_MMC_SDHCI_ROCKCHIP=y > +CONFIG_DM_ETH=y > +CONFIG_ETH_DESIGNWARE=y > +CONFIG_GMAC_ROCKCHIP=y > +CONFIG_PMIC_RK8XX=y > +CONFIG_REGULATOR_PWM=y > +CONFIG_REGULATOR_RK8XX=y > +CONFIG_PWM_ROCKCHIP=y > +CONFIG_BAUDRATE=1500000 > +CONFIG_DEBUG_UART_SHIFT=2 > +CONFIG_SYSRESET=y > +CONFIG_USB=y > +CONFIG_USB_XHCI_HCD=y > +CONFIG_USB_XHCI_DWC3=y > +CONFIG_USB_EHCI_HCD=y > +CONFIG_USB_EHCI_GENERIC=y > +CONFIG_USB_HOST_ETHER=y > +CONFIG_USB_ETHER_ASIX=y > +CONFIG_USB_ETHER_ASIX88179=y > +CONFIG_USB_ETHER_MCS7830=y > +CONFIG_USB_ETHER_RTL8152=y > +CONFIG_USB_ETHER_SMSC95XX=y > +CONFIG_USE_TINY_PRINTF=y > +CONFIG_ERRNO_STR=y -- Paul Kocialkowski, Bootlin Embedded Linux and kernel engineering https://bootlin.com _______________________________________________ Linux-rockchip mailing list Linux-rockchip@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-rockchip
