Am Dienstag, 9. April 2019, 22:47:06 CEST schrieb Douglas Anderson: > Most rk3288-based boards are derived from the EVB and thus use a PWM > regulator for the logic rail. However, most rk3288-based boards don't > specify the PWM regulator in their device tree. We'll deal with that > by making it critical. > > NOTE: it's important to make it critical and not just IGNORE_UNUSED > because all PWMs in the system share the same clock. We don't want > another PWM user to turn the clock on and off and kill the logic rail. > > This change is in preparation for actually having the PWMs in the > rk3288 device tree actually point to the proper PWM clock. Up until > now they've all pointed to the clock for the old IP block and they've > all worked due to the fact that rkpwm was IGNORE_UNUSED and that the > clock rates for both clocks were the same. > > Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx> applied for 5.2 I've added a comment line describing the pwm-reg reason. Heiko _______________________________________________ Linux-rockchip mailing list Linux-rockchip@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-rockchip
