Hi, On Tue, Apr 9, 2019 at 4:14 PM Matthias Kaehlcke <mka@xxxxxxxxxxxx> wrote: > > Add GPIO D5 (BT_ENABLE_L) as reset-GPIO to the power sequence for the > Bluetooth/WiFi module. On devices with a Broadcom module the signal > needs to be asserted to use Bluetooth. > > Note that BT_ENABLE_L is a misnomer in the schematics, the signal > actually is active-high. > > Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx> > --- > arch/arm/boot/dts/rk3288-veyron.dtsi | 13 ++++++++++--- > 1 file changed, 10 insertions(+), 3 deletions(-) Looks right to me. Thanks! Note that this might enable the signals in a different order than in the downstream Chrome OS kernel, but it looks like it doesn't matter in this case since the datasheet for the AzureWave module talks about enabling / disabling these pins in either order. Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx> _______________________________________________ Linux-rockchip mailing list Linux-rockchip@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-rockchip
