Hi Johan,
Am Donnerstag, 21. März 2019, 01:14:40 CEST schrieb Johan Jonker:
> Add fixed screen size DVI-D support
> for rk3066 hdmi with an extra patch.
>
> Signed-off-by: Johan Jonker <jbx6244@xxxxxxxxx>
> +static const struct drm_display_mode edid_cea_modes[] = {
> + /* 4 - 1280x720@60Hz 16:9 */
> + { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 74250, 1280, 1390,
> + 1430, 1650, 0, 720, 725, 730, 750, 0,
> + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC),
> + .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
> +};
you already dropped this patch from v6, but just for completeness sake,
I don't think there should be a static mode for dvi displays.
Similar to hdmi, dvi also can use ddc to read the monitor edid and some
sort of static mode might behave badly if for example a display with less
than this 720p is connected.
I think I remember reading in the Rockchip tree that they added that for
the case reading the edid fails, but if that happens the reading should
be fixed and not worked around a failure :-)
Heiko
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
