On Mon, Mar 04, 2019 at 11:30:25AM -0800, David Miller wrote: > From: Heiner Kallweit <hkallweit1@xxxxxxxxx> > Date: Sun, 3 Mar 2019 19:58:57 +0100 > > > Currently the Phy driver's link_change_notify callback is called > > whenever the state machine is run (every second if polling), no matter > > whether the state changed or not. This isn't needed and may confuse > > users considering the name of the callback. Therefore let's change > > the behavior and call this callback only in case of an actual > > state change. > > > > This requires changes to the at803x and rockchip drivers. > > at803x can be simplified so that it reacts on a state change to > > PHY_NOLINK only. > > The rockchip driver can also be much simplified. We simply re-init > > the AFE/DSP registers whenever we change to PHY_RUNNING and speed > > is 100Mbps. This causes very small overhead because we do this even > > if the speed was 100Mbps already. But this is neglectable and > > I think justified by the much simpler code. > > > > Changes are compile-tested only. > > > > Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx> > > Someone please review this. Hi David We should probably wait for a Tested-by: from Daniel Mack <zonque@xxxxxxxxx> and David Wu <david.wu@xxxxxxxxxxxxxx>, or equivalent. Andrew _______________________________________________ Linux-rockchip mailing list Linux-rockchip@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-rockchip
