ping...
On 2019/02/19 23:08, Katsuhiro Suzuki wrote:
This patch fixes pin assign of cts and rts signal of UART3.
Currently GPIO3_C2 and C3 pins are assigned but TRM says that
GPIO3_C0 and C1 are correct.
Refer:
RK3399 TRM v1.4 - Table 19-1 UART Interface Description
Signed-off-by: Katsuhiro Suzuki <katsuhiro@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 76fc2c7af80a..beaa92744a64 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -2535,12 +2535,12 @@
uart3_cts: uart3-cts {
rockchip,pins =
- <3 RK_PC2 RK_FUNC_2 &pcfg_pull_none>;
+ <3 RK_PC0 RK_FUNC_2 &pcfg_pull_none>;
};
uart3_rts: uart3-rts {
rockchip,pins =
- <3 RK_PC3 RK_FUNC_2 &pcfg_pull_none>;
+ <3 RK_PC1 RK_FUNC_2 &pcfg_pull_none>;
};
};
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
