Add led nodes on Rock64.
Use heartbeat trigger for the red standby led and
use mmc0 trigger for the white power led.
Signed-off-by: Jonas Karlman <jonas@xxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index 8f3e4b7d55c9..c4031b7718fc 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -65,6 +65,20 @@
regulator-max-microvolt = <5000000>;
};
+ leds {
+ compatible = "gpio-leds";
+
+ standby {
+ gpios = <&rk805 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ power {
+ gpios = <&rk805 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "mmc0";
+ };
+ };
+
sound {
compatible = "audio-graph-card";
label = "rockchip,rk3328";
@@ -157,6 +171,8 @@
interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <1>;
clock-output-names = "xin32k", "rk805-clkout2";
+ gpio-controller;
+ #gpio-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l>;
rockchip,system-power-controller;
--
2.17.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
