Am Sonntag, 24. Februar 2019, 21:10:50 CET schrieb David Summers: > On 24/02/2019 19:56, Jonas Karlman wrote: > > On 2019-02-24 20:35, David Summers wrote: > >> On 24/02/2019 19:26, Jonas Karlman wrote: > >>> On 2019-02-22 19:47, David Summers wrote: > >>>> The Problem: > >>>> > >>>> On ASUS Tinker Board S, when booting from the eMMC, and there is no > >>>> card sd slot, then there are constant errors. > >>>> > >>>> Cause: > >>>> > >>>> Thanks must go to Robin Murphy @ ARM for idenifying the problem. The > >>>> rk808 on the Tinker Board and Tinker Board S has many regulators, one > >>>> vccio_sd powers the IO for the sd card. Unfortunatly this is also used > >>>> in the card detect. Now when no card is install, the regulator is > >>>> powered down. This means that the card detect floats, and this means > >>>> random card detection. > >>>> > >>>> The Solution: > >>>> > >>>> Make sure that the sd IO is always powered, this means card detection > >>>> is always active, which is what should be done on a board with an sd > >>>> slot, which both the Tinker Board and Tinker Board S are. Hence change > >>>> is made to the .dtsi which takes effect on all Tinker Boards as > >>>> required. > >>>> > >>>> The change also adds "regulator-boot-on" the Tinker Board boot from > >>>> uboot, and the sd card is always one option. Hence the IO must be > >>>> powered in uboot, and so setting this flag. > >>>> > >>>> Also removed is "disable-wp" the micro sd card which are used have no > >>>> write protection, so the concept doesn't mean anything, and the > >>>> Tinker Boards work without this. Hence it is removed to simply. > >>>> > >>>> This change came from ArchLinux Arm, but we note it is the fix also > >>>> used by Armbian: > >>>> > >>>> https://nam02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithu > >>>> b.com%2FMiouyouyou%2FRockMyy%2Fblob%2Fmaster%2Fpatches%2Fkernel%2Fv5.0% > >>>> 2FDTS%2F0016-ARM-DTSI-rk3288-tinker-Setting-up-the-SD-regulators.patch& > >>>> amp;data=02%7C01%7C%7Cf5937082939e4163c84b08d69a8f3b61%7C84df9e7fe9f640 > >>>> afb435aaaaaaaaaaaa%7C1%7C0%7C636866337295767294&sdata=tK8QE3bsG9LW% > >>>> 2FJcvFzLKa8%2BPj5u%2F8exbEn8m2vqKly0%3D&reserved=0 > >>>> > >>>> Signed-off-by: David Summers <beagleboard@xxxxxxxxxxxxxxxxxxx> > >>>> --- > >>>> > >>>> arch/arm/boot/dts/rk3288-tinker.dtsi | 3 ++- > >>>> 1 file changed, 2 insertions(+), 1 deletion(-) > >>>> > >>>> diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi > >>>> b/arch/arm/boot/dts/rk3288-tinker.dtsi index > >>>> aa107ee41b8b..6b7e55085b0c 100644 > >>>> --- a/arch/arm/boot/dts/rk3288-tinker.dtsi > >>>> +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi > >>>> @@ -254,6 +254,8 @@ > >>>> > >>>> }; > >>>> > >>>> vccio_sd: LDO_REG5 { > >>>> > >>>> + regulator-always-on; > >>>> + regulator-boot-on; > >>>> > >>>> regulator-min-microvolt = <1800000>; > >>>> regulator-max-microvolt = <3300000>; > >>>> regulator-name = "vccio_sd"; > >>>> > >>>> @@ -431,7 +433,6 @@ > >>>> > >>>> cap-mmc-highspeed; > >>>> cap-sd-highspeed; > >>>> card-detect-delay = <200>; > >>>> > >>>> - disable-wp; /* wp not hooked up */ > >>> > >>> I think disable-wp correctly describes that wp is not expected to work > >>> and should not be removed.>>> > >>> From comment in mmc_sd_get_ro(): > >>> "Some systems don't feature a write-protect pin and don't need one. > >>> E.g. because they only have micro-SD card slot. For those systems > >>> assume that the SD card is always read-write." > >>> > >>> Without disable-wp core will call dw_mci_get_ro() to get wp status. > >>> > >>> > >>> This patch also fixes reboot when booting from sd-card and having emmc > >>> zeroed out. > >>> > >>> Tested-by: Jonas Karlman <jonas@xxxxxxxxx> > >>> > >>> Regards, > >>> Jonas > >>> > >>>> pinctrl-names = "default"; > >>>> pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; > >>>> status = "okay"; > >> > >> Hi Jonas, > >> > >> Thanks for testing - did you get an error with "disable-wp" ? > >> > >> We tested this with @TheSaint On ArchLinux Arm, and it worked! > >> > >> With the "regulator-boot-on" and on reboot, it should keep power on the > >> sd card - so reboot should work. > > > > I tested both with and without "disable-wp" removed and both works without > > error. SD-card reboots now works as it should thanks to > > "regulator-always-on" and "regulator-boot-on", I only tested using both. > > > > On a side note I have also been testing [1] to make reboot with UHS signal > > voltage work and will send out a RFC v2 after I have concluded testing on > > my other devices supporting UHS signal voltage. > > > > [1] > > https://github.com/Kwiboo/linux-rockchip/compare/patch-rk-5.x-tinker-uhs% > > 5E%5E%5E...patch-rk-5.x-tinker-uhs > > > > Regards, > > Jonas > > Thanks. > > Glad your are testing - and I hope the uhs tests work. > > Alas for us to test uhs - and our user on Arch isn't so experienced. I > could push him to try different speeds - but to be honest I expect it to > be beyond his comfort zone. > > But its good to here you confirm "disable-wp" works. To my mind it says > we are sure that all three changes in the patch are are correct. > > Hopefully this will be straight forward to Heiko to accept. Its the > simple patch of the 3 to accept ;) >From Jonas' explanation, I'd guess we want disable-wp to stay in the node, and not remove it as it tells the system, that "there is no write protect status available" hence it doesn't need to check for it. Heiko _______________________________________________ Linux-rockchip mailing list Linux-rockchip@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-rockchip
